A split Hopkinson pressure bar is used to investigate the dynamic mechanical properties of biomedical 316L stainless steel under strain rates ranging from 1 × 103 s-1to 5 × 103 s-1and temperatures betweenand. The results indicate that the flow stress, work-hardening rate, strain rate sensitivity, and thermal activation energy are all significantly dependent on the strain, strain rate, and temperature. For a constant temperature, the flow stress, work-hardening rate, and strain rate sensitivity increase with increasing strain rate, while the thermal activation energy decreases. Catastrophic failure occurs only for the specimens deformed at a strain rate of 5 × 103 s-1and temperatures ofor. Scanning electron microscopy observations show that the specimens fracture in a ductile shear mode. Optical microscopy analyses reveal that the number of slip bands within the grains increases with an increasing strain rate. Moreover, a dynamic recrystallisation of the deformed microstructure is observed in the specimens tested at the highest temperature of.
Hydroxypropyl methylcellulose (HPMC) is a common hydrophilic and biodegradable polymer that can form films. This study incorporated aluminum nanoadditives as an enhancement reagent into a HPMC matrix. Mechanical properties of nanocompoistes, including the tensile strength and the elastic modulus, were analyzed with a nano-tensile tester. The incorporation of additives in HPMC films significantly enhances their mechanical and film barrier properties. Evidence of bonding between the additive and matrix was observed by Fourier-transform infrared spectrometer analysis. The additives occupy the spaces in the pores of the matrix, which increases the tendency of the pore to collapse and improves the chemical bonding between the base material and the additives. The incorporation of excess additives decreases the tensile strength due to ineffective collisions between the additives and the matrix. The wear test proves that the addition of nano-additives can improve the tribology performance of the HPMC composite while reducing the wear volume and the friction. Bonding between the nanoadditives and the matrix does not help release the nanoadditives into the wear interface as a third-body layer. The main reason to enhance the tribology performance is that the nanoadditives improve the load-capacity of the composite coating. This hybrid composite can be useful in many sustainability applications.
This study investigates the multiwalled carbon nanotube as potential mechanical reinforcement in epoxy polymer. It is found that, by adding various concentrations of nanotube, both flow stress and fracture strain increased. Furthermore, the presences of the multiwalled carbon nanotubes are found to nucleate crystallization in the epoxy. This crystal growth is thought to enhance the strength of composite. The fracture surface analysis of the composite reinforced by carbon nanotube is used the scanning electron microscopy.
In this study, the high strain rate deformation behavior and the microstructure evolution of Zr-Cu-Al-Ni metallic glasses under various strain rates were investigated. The influence of strain and strain rate on the mechanical properties and fracture behavior, as well as microstructural properties was also investigated. Before mechanical testing, the structure and thermal stability of the Zr-Cu-Al-Ni metallic glasses were studied with X-ray diffraction (XRD) and differential scanning calorimeter. The mechanical property experiments and microstructural observations of Zr-Cu-Al-Ni metallic glasses under different strain rates ranging from 10−3 to 5.1 × 103 s−1 and at temperatures of 25 °C were investigated using compressive split-Hopkinson bar (SHPB) and an MTS tester. An in situ transmission electron microscope (TEM) nanoindenter was used to carry out compression tests and investigate the deformation behavior arising at nanopillars of the Zr-based metallic glass. The formation and interaction of shear band during the plastic deformation were investigated. Moreover, it was clearly apparent that the mechanical strength and ductility could be enhanced by impeding the penetration of shear bands with reinforced particles.
Synthetic polymers are the most commonly used polymers in daily life. Therefore, it is necessary to develop environmentally friendly polymers. Hydroxypropyl methylcellulose (HPMC) is a potential candidate for a biopolymer, owing to its unique properties. However, HPMC biopolymers have some disadvantages compared to synthetic polymers. In this study, the mechanical properties and tribological performance of MoS2 additive-enhanced cellulose matrix biocomposites were investigated in order to improve the properties of HPMC. MoS2 was incorporated into the HPMC matrix as a strengthening additive. The mechanical properties, bonding, and water vapor permeability of the composites were analyzed. The mechanical and vapor barrier properties of the HPMC films were significantly enhanced. The ultimate tensile strength and Young’s modulus of the composite films increased with the addition of up to 1 wt% MoS2. The water vapor permeability of HPMC films reduced when additives were incorporated. The wear test proves that the MoS2 additives can improve the tribological performance of the HPMC composite while reducing the friction coefficient. The main reason for enhanced tribological performance is the improvement in load capacity of the composite coating by the MoS2 additive. This MoS2/HPMC biocomposite can be used in food packaging.