Hongsheng Zhang

Dr. Hongsheng Zhang

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 March 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HZHongsheng Zhang
Hongsheng Zhang
PJPAN Jun
PAN Jun
Meng RaoMeng Rao
Meng Rao
ZLZhengwei Li
Zhengwei Li
Xihui LiangXihui Liang
Xihui Liang
Many researchers have developed analytical methods to evaluate gear meshing stiffness. Some of these methods ignored the effect of the gear body while others used a simplified model to consider its effect. Until now, a detailed investigation of gear body-induced tooth deflections has been rare, especially for the double-tooth-pair meshing period. In this study, we present a detailed investigation of gear body-induced tooth deflections. To be specific, we will discuss how to accurately evaluate gear body-induced tooth deflections using the finite element analysis, and what are the effect of parameters such as loading and gear parameters on gear body-induced tooth deflections. Then, an improved solution is developed for evaluating the body-induced tooth deflection. In the single-tooth-pair meshing period, the improved formula is developed based on a popular formula proposed by Sainsot and Velex. This is achieved by optimizing the coefficients used in their formula to make the formula more accurate to evaluate gear body-induced tooth deflections. Meanwhile, we introduce a new term called affiliated body stiffness to evaluate the body-induced tooth deflections in the double-tooth-pair meshing period. The improved method can give higher accuracy in evaluating gear body-induced tooth deflections of spur gears with a pressure angle of 20°.


1 October 2025
Verified
Book Chapter
Open access
PDF file
YWYue Wang
Yue Wang
XWXiangxiang Wang
Xiangxiang Wang
HZHongsheng Zhang
Hongsheng Zhang
In order to explore the contact safety problems of broken iced ultra-high voltage wires on the construction of shed tunnels, a project design sketch is first established based on actual engineering data and the research technical route is determined. Secondly, the iced wires, shed tunnels, and their contact parts are regarded as the research objects, and the APDL modeling method is used to establish a finite element analysis model. The SOLID185 element is utilized to establish the finite element analysis model of the contacted shed tunnel structure, and the BEAM189 element is applied to establish the ANSYS models of six iced lines. Arrange contact element CONTA175 on the iced wire and target element TARGE169 on the foam concrete roof of the shed tunnel which will be contacted by wires, and set the contact pair properties according to the actual working conditions. Contact between the wire and the shed tunnel is performed. Finally, results are obtained from different conditions and they are analyzed, which is beneficial to determine the dangerous contact area on the roof of the shed tunnel.

29 June 2024
Verified
Book Chapter
Open access
PDF file
SLShuo Li
Shuo Li
HZHongsheng Zhang
Hongsheng Zhang
XWXiangxiang Wang
Xiangxiang Wang
The movable pulley block failure can lead to catastrophic crane accidents, so the dynamic performance of a defective movable pulley block system is essential. Based on ANSYS contact analysis through APDL command, a pulley block simulation platform is developed, which can be used for dynamic analysis of defective pulley systems. Firstly, a parameterized 2D contact model is established and validated through static analysis. Then, dynamic simulation analysis for the intact pulley block under two working conditions is performed: lifting from the ground and sudden unloading. Finally, COMBIN 37 is used as a defective element, and dynamic simulations are analyzed for the faulty pulley system with hook or wire rope rupture. The analysis results show that the longer the unloading time and the shorter the wire rope length will lead to a minor impact under hook rupture and sudden unloading conditions. Meanwhile, if the unloading time is consistent, the dynamic analysis of the intact pulley block under sudden unloading and defective pulley block with hook rupture are equivalent. It is worth noting that when the steel wire ropes on both sides of the moving pulley break simultaneously in a defective system, it will cause a more significant horizontal impact force. This study demonstrates that ANSYS contact analysis with COMBIN 37 as the defective element can accurately and efficiently apply the dynamic simulation of a crane movable pulley system with defects.

29 June 2024
Verified
Book Chapter
Open access
PDF file
WLWenwu Liu
Wenwu Liu
HZHongsheng Zhang
Hongsheng Zhang
NLNianli Lu
Nianli Lu
In order to study the wind load fatigue residual strength in in-service holding poles for preventing disasters, and improving load-bearing capacity reliability. Firstly, using the Davenport wind speed spectrum to simulate the wind speed, it will be the input load of the finite element dynamics model of the 2 × 40 kN double active arm type holding pole (DAATHP). The stress time history curve at the welding section of the main chord at the bottom of the tower shaft is obtained at the working condition with the wind angle of 0°, 45°, 90°, and 135°. The rain flow counting method derives the statistical characteristics of the mean, amplitude, and frequency of stress at four wind angles. Secondly, the frequency of wind load under four wind angles is extended, and the synthesized fatigue load spectrum is used as the equivalent wind load spectrum. Finally, the Paris-Eadogan equation is used to derive the calculation formula of fatigue residual strength of the main chord at the bottom of the tower shaft, and the functional function of the main chord is established and then the failure probability formula is derived by combining the equivalent wind load spectrum. It is found that, compared with the ANSYS calculation results, the error of the predicted stress spectrum of the proposed method is minor, only 7.95%. It is verified that the proposed method can efficiently obtain the equivalent load spectrum of the DAATHP. The results indicate that it is feasible and practical to apply the proposed method to calculate the remaining fatigue life of the DAATHP.

7 September 2026 in Engineering Optimization
Verified
Journal Article
Closed access
YWYue Wang
Yue Wang
SHShengbo Hu
Shengbo Hu
YZYouxiang Zheng
Youxiang Zheng
HZHongsheng Zhang
Hongsheng Zhang
1. Topology optimization is an optimization method based on size optimization and shape optimization, by determining the connectivity, location and shape of voids within a given design domain (Deat...