Mustafa M. Demir

Prof. Mustafa M. Demir


Research Focus & Metrics

Academic Career Length

37Years (1990-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2002 in Polymer
Verified
Journal Article
Closed access
MDMustafa M. Demir
Mustafa M. Demir
ÍYÍskender Yílgör
Ískender Yílgör
EYE Yilgor
E Yilgor
BEB Erman
B Erman

13 February 2004 in Macromolecules
Verified
Journal Article
Open access
MDMustafa M. Demir
Mustafa M. Demir
MGMehmet A. Gulgun
Mehmet A. Gulgun
YMYusuf Menceloglu
Yusuf Menceloglu
BEBurak Erman
Burak Erman
SASergei S. Abramchuk
Sergei S. Abramchuk
MSMikhail G. Sulman
Mikhail G. Sulman
Catalytic palladium (Pd) nanoparticles on electrospun copolymers of acrylonitrile and acrylic acid (PAN-AA) mats were produced via reduction of PdCl2 with hydrazine. Fiber mats were electrospun from homogeneous solutions of PAN-AA and PdCl2 in dimethylformamide (DMF). Pd cations were reduced to Pd metals when fiber mats were treated in an aqueous hydrazine solution at room temperature. Pd atoms nucleate and form small crystallites whose sizes were estimated from the peak broadening of X-ray diffraction peaks. Two to four crystallites adhere together and form agglomerates. Agglomerate sizes and fiber diameters were determined by scanning and transmission electron microscopy. Spherical Pd nanoparticles were dispersed homogeneously on the electrospun nanofibers. The effects of copolymer composition and amount of PdCl2 on particle size were investigated. Pd particle size mainly depends on the amount of acrylic acid functional groups and PdCl2 concentration in the spinning solution. Increasing acrylic acid concentration on polymer chains leads to larger Pd nanoparticles. In addition, Pd particle size becomes larger with increasing PdCl2 concentration in the spinning solution. Hence, it is possible to tune the number density and the size of metal nanoparticles. The catalytic activity of the Pd nanoparticles in electrospun mats was determined by selective hydrogenation of dehydrolinalool (3,7-dimethyloct-6-ene-1-yne-3-ol, DHL) in toluene at 90 °C. Electrospun fibers with Pd particles have 4.5 times higher catalytic activity than the current Pd/Al2O3 catalyst.

28 April 2006 in Macromolecular Rapid Communications
Verified
Journal Article
Open access
PDF file
MDMustafa M. Demir
Mustafa M. Demir
MMMine Memesa
Mine Memesa
PCPatrice Castignolles
Patrice Castignolles
GWGerhard Wegner
Gerhard Wegner
Summary: Dispersing surface‐modified zinc oxide nanoparticles (ZnO) in methyl methacrylate (MMA) improves the free radical bulk polymerization process as well as the thermal stability of the formed polymer. Hydroxy groups available on the ZnO surface may induce a degenerative transfer. This suppresses the gel effect, which leads to a better control of the heat evolution during the late stages of polymerization. The formation of chains having vinylidene end groups and head‐to‐head links is suppressed, which shifts the onset of thermal decomposition to the regime where decomposition occurs by random chain scission. Thermal degradation profiles of PMMA and its composite with ZnO at 11 wt.‐%. magnified image Thermal degradation profiles of PMMA and its composite with ZnO at 11 wt.‐%.

19 January 2007 in Macromolecules
Verified
Journal Article
Open access
MDMustafa M. Demir
Mustafa M. Demir
KKKaloian Koynov
Kaloian Koynov
ÜAÜmit Akbey
Ümit Akbey
CBChristoph Bubeck
Christoph Bubeck
IPInsun Park
Insun Park
GWGerhard Wegner
Gerhard Wegner
Composites that show visible light transmittance, UV absorption, and moderately high refractive index, based on poly(methyl methacrylate) (PMMA) and zinc oxide (zincite, ZnO) nanoparticles, were prepared in two steps. First, surface-modified ZnO nanoparticles with 22 nm average diameter were nucleated by controlled precipitation via acid-catalyzed esterification of zinc acetate dihydrate with pentan-1-ol. The surface of growing crystalline particles was modified with tert-butylphosphonic acid (tBuPO3H2) in situ by monolayer coverage. Particle size and graft density of −PO3H2 on the particle surface were controlled by the amount of surfactant applied to the reaction solution. Second, the surface-modified particles were incorporated into PMMA by in-situ bulk polymerization. Free radical polymerization was carried out in the presence of these particles using AIBN as initiator. Volume fraction (φ) of the particles was varied from 0.10 to 7.76% (0.5 to 30 wt %). Although the particles are homogeneously dispersed in monomer, segregation of the individual particles upon polymerization was observed. Optical constants of the films ca. 2.0 μm including absorption and scattering efficiencies, indices of refraction, and dispersion constants were determined. The absorption coefficient at 350 nm increases linearly with ZnO, obeying Beer's law at low particle contents. However, it levels off toward a value of about 5000 cm-1 and shows a negative deviation at high concentrations because of aggregation of the individual particles. Waveguide propagation loss coefficients of the composite films were examined by prism coupling. A steep increase of the loss coefficient was found with a slope of 52 dB cm-1 vol %-1 as the volume fraction of the particle increases. The refractive index of the composites depends linearly on volume fraction of ZnO and varies from 1.487 to 1.507 (φ = 7.76%) at 633 nm. The dispersion of refractive index was found to be consistent with Cauchy's formula.

7 March 2013 in RSC Advances
Verified
Journal Article
Open access
PDF file
NHNesrin Horzum
Nesrin Horzum
MDMustafa M. Demir
Mustafa M. Demir
MNMuath Nairat
Muath Nairat
TSTalal Shahwan
Talal Shahwan
This study proposes a new sorbent for the removal of inorganic arsenic from aqueous solutions. Monodispersed nano zero-valent iron (nZVI) particles were nucleated at the surface of electrospun chitosan fibers (average fiber diameter of 195 ± 50 nm) by liquid phase reduction of FeCl3 using NaBH4. The material was characterized using SEM, TGA, XPS, XRD, and FTIR. The diameter of iron nanoparticles was found to vary between 75–100 nm. A set of batch experiments were carried out to elucidate the efficiency of the composite sorbent toward fixation of arsenite and arsenate ions. The ion concentrations in the supernatant solutions were determined using inductively coupled plasma-mass spectrometry (ICP-MS). The results revealed that the chitosan fiber supported nZVI particles is an excellent sorbent material for inorganic arsenic uptake at concentrations ranging from 0.01 to 5.00 mg L−1 over a wide range of pH values. Based on XPS analysis, As(III) was found to undergo oxidation to As(V) upon sorption, while As(V) retained its oxidation state. By virtue of the successful combination of the electrospun fibers' mechanical integrity and the large reactivity of dispersed nZVI particles, the applicability of the resulting sorbent material in arsenic sorption holds broad promise.

1 December 2012 in Chemical Engineering Journal
Verified
Journal Article
Open access
NHNesrin Horzum
Nesrin Horzum
TSTalal Shahwan
Talal Shahwan
OPOnur Parlak
Onur Parlak
MDMustafa M. Demir
Mustafa M. Demir
This study reports a feasible method for the removal of radioactive U(VI) ions from aqueous systems via column sorption under continuous flow. Electrospun polyacrylonitrile (PAN) fibers were used as sorbent materials in a homemade minicolumn. The nitrile groups on the fibers' surface were modified to amidoxime groups using hydroxylamine hydrochloride. Surface modification was observed to enhance the sorption capacity of PAN fibers toward uranium ions by more than 4-fold by virtue of the chelating ability of the amidoxime groups. The experiments investigated the effect of pH, initial concentration, and repetitive loading on the sorption properties of amidoximated PAN fibers. Based on the overall results, the surface-modified fibers seem to be a suitable potential sorbent material for applications in environmental cleanup, particularly for nuclear plants