The corrosion inhibition performance of Hexa (3-methoxy propan-1,2 diol) cyclotriphosphazene (HMC) on carbon steel in 3% NaCl solution was investigated by weight loss (WL), potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS) measurements, Density functional theory (DFT) and Monte Carlo (MC) simulation. The corrosion inhibition efficiency at optimum concentration (10-3M) is 99% of HMC at 298 K. The corrosion inhibition efficiency at 10-3 M decreases with increase in temperature. The adsorption of HMC on the surface of carbon steel obeyed Langmuir isotherm. Potentiodynamic polarization study confirmed that inhibitor anodic-type. DFT and Monte Carlo (MC) simulations based computational approaches were under taken to support the experimental findings. DFT studies revealed that HMC interact with metallic surface through donor-acceptor interactions in which the anionic parts act as electron donor (HOMO) and cationic parts behaved as electron acceptor (LUMO). The MC simulations study showed that studied HMC adsorb spontaneously on Fe (110) surface.

In this work, we have studied, formulated, prepared, and characterized the rheological and electrical behavior of a composite material based on an epoxy resin Diglycidyl Ether of Bisphenol A (DGEBA) reinforced with hexaglycidyl cyclotriphosphazene (HGCP). The epoxy system was cured with 4,4’-methylene dianiline (MDA). DGEBA-HGCP-MDA epoxy composite materials with reinforced HGCP which varied from 5% to 10% by weight were prepared by mixing in the molten state. The morphology was evaluated by SEM. The rheological behavior was studied using small deformation rheology. The electrical characterization was carried out with a frequency variation range from 1 Hz to 100 KHz at room temperature. These measurements revealed that the rheological and electrical behaviors strongly depend on the quantity of HGCP in the DGEBA matrix. The linear viscoelastic properties study reveals that the modulus of elasticity G’ is dependent on the amount of HGCP present in the epoxy resin DGEBA. The capacitance-frequency measurements suggest a distribution of localized states in the band gap of the blends.

Synthèse et dégradation thermique d’un phosphazène contenant le groupe époxyde Synthesis and thermal degradation of phosphazene containing the epoxy group