We report use of U-shaped biconically tapered optical fibers (BTOF) as probes for label-free immunoassays. The tapered regions of the sensors were functionalized by immobilization of immunoglobulin-G (Ig-G) and tested for detection of anti-IgG at concentrations of 50 ng/mL to 50 µg/mL. Antibody-antigen reaction creates a biological nanolayer modifying the waveguide structure leading to a change in the sensor signal, which allows real-time monitoring. The kinetics of the antibody (mouse Ig-G)-antigen (rabbit anti-mouse IgG) reactions was studied. Hydrofluoric acid treatment makes the sensitive region thinner to enhance sensitivity, which we confirmed by experiments and simulations. The limit of detection for the sensor was estimated to be less than 50 ng/mL. Utilization of the rate of the sensor peak shift within the first few minutes of the antibody-antigen reaction is proposed as a rapid protein detection method.
We studied the dependence of sensitivity of a biconically tapered optical fiber sensor on the wavelength of light used, and experimentally demonstrated refractive index sensitivity of about 11000 nm/RIU near 1570 nm. We predict that tapered fiber refractive index sensors with sensitivities exceeding 50000 nm/RIU can be developed. We attribute the enhanced sensitivity mainly to the nonlinear variation of the difference in mode propagation constants with wavelength. Such high sensitivity with low cost and simplicity makes tapered fiber refractive index sensors good candidates for sensing applications in medical diagnosis, food safety, environmental monitoring, and biodefense.
We experimentally demonstrated the measurement of a solid’s coefficient of thermal expansion (CTE) using a single-mode-multimode-single-mode (SMS) fiber sensor, leveraging its sensitivity to both temperature and strain.
A single-mode—multimode—single-mode (SMS) fiber sensor probe with gold coating was developed for temperature sensing. The sensor probe is well-suited for spatially limited conditions, offering temperature sensitivity comparable to inline SMS fiber sensors.
Single-mode-multimode-single-mode (SMS) fiber sensors typically have a limited dynamic range for temperature and strain measurements. We propose using phase unwrapping to achieve a wider dynamic range while maintaining a reasonable detection limit for strain measurement.