Grape seeds are an important byproduct from the grape process. The objective of this work was to evaluate the effect of experimental parameters (temperature and time of pretreatment with ultrasound) to obtain grape seed oil using low pressure (Soxhlet-Sox and Bligh Dyer-BD) and high pressure (supercritical carbon dioxide-SFE) methods. The best condition for pretreatment of samples was 30 min of sonication at 30 °C before extraction by Sox or BD. Ultrasound pretreatment was efficient to increase oil extraction yield by 32.10 (Sox), 20.31 (BD) and 12.54% (SFE), depending on the extraction method used as well as, and certainly influenced the total phenolic concentration in 311 (Sox), 234 (BD), and 184 (SFE)%. Ten fatty acids were identified in the oils, the major ones being 18:2ω-6cis (linoleic 52.39%–63.12%), 16:0 (palmitic 20.22%–26.80%) and 18:0 (stearic 8.52%–13.68%). The highest epicatechin concentration was identified in the BD sample: 30-30 (150.49 ± 5.98mg/kg), which presented a concentration of ≥3 times compared to the control (56.68 ± 1.81mg/kg). Ultrasound pretreatment also contributed positively (56% and 99% increase) in the α-tocopherol content of the SFE: 30-30 and BD: 30-30 samples, respectively. The results indicate that the ultrasound pretreatment is a suitable technology to improve the quality of the oil from the grape seed.

The objective of this study was to determine the best operational conditions for obtaining red propolis extract with high antioxidant potential through supercritical fluid extraction (SFE) technology, using carbon dioxide (CO₂) as the supercritical fluid and ethanol as the cosolvent. The following parameters were studied: overall extraction curve, S/F (mass of CO₂/mass of sample), cosolvent percentage (0, 1, 2 and 4%) and global yield isotherms as a function of different pressures (250, 350 and 450 bar) and temperatures (31.7, 40 and 50 °C). Within the investigated parameters, the best conditions found were an S/F of 131 and the use of ethanol at the highest concentration (4% w/w), which resulted in higher extract yields and higher content of antioxidant compounds. Formononetin, the main biomarker of red propolis, was the compound found at the highest amounts in the extracts. As expected, the temperature and pressure conditions also influenced the process yield, with 350 bar and 40 °C being the best conditions for obtaining bioactive compounds from a sample of red propolis. The novel results for red propolis found in this study show that it is possible to obtain extracts with high antioxidant potential using a clean technology under the defined conditions.

The demand for bee products has been growing, especially regarding their application in complementary medicine. Apis mellifera bees using Baccharis dracunculifolia D.C. (Asteraceae) as substrate produce green propolis. Among the examples of bioactivity of this matrix are antioxidant, antimicrobial, and antiviral actions. This work aimed to verify the impact of the experimental conditions applied in low- and high-pressure extractions of green propolis, using sonication (60 kHz) as pretreatment to determine the antioxidant profile in the extracts. Total flavonoid content (18.82 ± 1.15–50.47 ± 0.77 mgQE·g⁻¹), total phenolic compounds (194.12 ± 3.40–439.05 ± 0.90 mgGAE·g⁻¹) and antioxidant capacity by DPPH (33.86 ± 1.99–201.29 ± 0.31 µg·mL⁻¹) of the twelve green propolis extracts were determined. By means of HPLC-DAD, it was possible to quantify nine of the fifteen compounds analyzed. The results highlighted formononetin (4.76 ± 0.16–14.80 ± 0.02 mg·g⁻¹) and p-coumaric acid (<LQ—14.33 ± 0.01 mg·g⁻¹) as majority compounds in the extracts. Based on the principal component analysis, it was possible to conclude that higher temperatures favored the release of antioxidant compounds; in contrast, they decreased the flavonoid content. Thus, the obtained results showed that samples pretreated with 50 °C associated with ultrasound displayed a better performance, which may support the elucidation of the use of these conditions.

There are a significant number of analytical methodologies employing different techniques to determine phenolic compounds in beverages. However, these methods employ long sample preparation processes and great time consumption. The aim of this paper was the development of a simple method for evaluating the phenolic compounds’ presence in Brazilian craft beers without a previous extraction step. Catechin, caffeic acid, epicatechin, p-coumaric acid, hydrated rutin, trans-ferulic acid, quercetin, kaempferol, and formononetin were analyzed in fifteen different craft beers. The method showed good linearity (R² ≥ 0.9966). The limit of detection ranged from 0.08 to 0.83 mg L⁻¹, and limits of quantification were between 0.27 and 2.78 mg L⁻¹. The method showed a satisfactory precision (RSD ≤ 16.2%). A good accuracy was obtained by the proposed method for all phenolic compounds in craft beer (68.6% ˂ accuracy ˂ 112%). Catechin showed higher concentrations (up to 124.8 mg L⁻¹) in the samples, followed by epicatechin (up to 51.1 mg L⁻¹) and caffeic acid (up to 8.13 mg L⁻¹). Rutin and formononetin were observed in all analyzed samples (0.52 mg L⁻¹ to 2.40 mg L⁻¹), and kaempferol was less present in the samples. The presence of plant origin products was determinant for the occurrence of the highest concentrations of phenolic compounds in Brazilian craft beers.

Minerals bearing rare earth elements (REEs) are formed through long geological processes, among which monazite, bastnasite, xenotime, and ionic adsorption clays are the most economically exploited. Although Brazil has one of the largest reserves of REEs on the planet, its production is still not significant on the world stage. China remains dominant, with the largest reserves of REEs and controlling more than half of world production. Due to their important application in advanced clean and low-carbon energy technologies, REEs have become fundamental to the energy transition process. Technological applications related to catalyst synthesis, ceramics production, and metallurgy have been explored. Furthermore, the use of REEs in devices of great demand today, such as computer memory, rechargeable batteries, and mobile phones, has been cited. With the growing demand for these critical minerals, large mining companies are seeking to implement cleaner production policies in their processes and save natural resources to minimize the environmental impacts of the exploration. Robust analytical techniques have made it possible to characterize these elements in multi-element geological matrices, with the increasing exploration and identification of new REE mineral reserves.