Nanocomposites consisting of a dielectric matrix, such as TiO2, with embedded noble metal nanoparticles (NPs) possess specific optical properties due to the surface plasmon resonance (SPR) effect, interesting for several applications. The aim of this work is to demonstrate that these properties are sensitive to the nanostructure of magnetron-sputtered TiO2/Au thin films, which can be tuned by annealing. We study the role of the shape and size distribution of the NPs, as well as the influence of the crystallinity and phase composition of the host matrix on the optical response of the films. All these characteristics can be modified by vacuum annealing treatments of the deposited films. A theoretical interpretation and modeling of the experimental results obtained is presented. The model involves a modified Maxwell-Garnett approach for the effective dielectric function of the composite (describing the SPR effect) and the transfer matrix formalism for multilayer optics. Input data are based on the experimental information obtained from the detailed structural characterization of the films. It is shown that the annealing treatments can be used for controlling the optical properties of the composite films, making them attractive for decorative coatings.
The use of cermets as fuel electrodes for solid oxide electrolysis cells requires permanent circulation of reducing gas, e.g. H 2 or CO, so called safe gas, in order to avoid oxidation of the metallic phase. Replacing metallic based electrodes by pure oxides is therefore proposed as an advantage for the industrial application of solid oxide electrolyzers. In this work, full-ceramic symmetrical solid oxide electrolysis cells have been investigated for steam/CO 2 co-electrolysis. Electrolyte supported cells with La 0.75 Sr 0.25 Cr 0.5 Mn 0.5 O 3−δ reversible electrodes have been fabricated and tested in co-electrolysis mode using different fuel compositions, from pure H 2 O to pure CO 2 , at temperatures between 850–900 °C. Electrochemical impedance spectroscopy and galvanostatic measurements have been carried out for the mechanistic understanding of the symmetrical cell performance. The content of H 2 and CO in the product gas has been measured by in-line gas micro-chromatography. The effect of employing H 2 as a safe gas has also been investigated. Maximum density currents of 750 mA cm −2 and 620 mA cm −2 have been applied at 1.7 V for pure H 2 O and for H 2 O : CO 2 ratios of 1 : 1, respectively. Remarkable results were obtained for hydrogen-free fuel compositions, which confirmed the interest of using ceramic oxides as a fuel electrode candidate to reduce or completely avoid the use of safe gas in operation minimizing the contribution of the reverse water shift reaction (RWSR) in the process. H 2 : CO ratios close to two were obtained for hydrogen-free tests fulfilling the basic requirements for synthetic fuel production. An important increase in the operation voltage was detected under continuous operation leading to a dramatic failure by delaminating of the oxygen electrode.