This work investigated the effect of colorant, thickness and pro-oxidant loading on degradation behavior of low-density polyethylene films during thermal aging. Films were formulated according to Taguchi design of experiments. The following degradation responses were monitored with thermal aging time: tensile strength, oxygen uptake, and carbonyl index. This study showed that colorant and pro-oxidant loading exhibited significant effect on the tensile strength of thermally aged films. White colorant and increased loading of pro-oxidant from 2% to 4% w/w reduced the tensile strength of aged films by 15.9% and 16.9%, respectively. However, incorporating yellow colorant improved the tensile strength of aged films by 3.2% as compared to noncolored films. Meanwhile, all three factors significantly influenced the maximum oxygen uptake of exposed films. White and yellow colorants increased the maximum oxygen uptake of aged films by 90.6% and 56.2%, respectively, when compared to films without colorant. On the other hand, increased film thickness from 1 to 3 mil lowered the maximum oxygen uptake by 31.6%, while increased pro-oxidant loading from 2% to 4% w/w showed an uptake increase of aged films by 204.3%. For the carbonyl index response, the index significantly increased by 84.6% with increased loading of pro-oxidant from 2% to 4% w/w, showing accelerated degradation of exposed films during thermal aging. Enhanced degradation of white films is due to the oxidative reactivity of titanium dioxide present in white colorant. Aromatic amine stabilizer in yellow colorant acts as antioxidant that delays film degradation.
1 January 2018 in Advances in Materials Science and Engineering
Natural bentonite was modified with zinc ions and was used as a filler to reduce the offensive odor from raw natural rubber (NR). Characterization of filler shows the limited exchange of inherent calcium ions and the preferred adsorption of zinc ions on the surface of natural bentonite during modification. The modification process was also accompanied by bassanite formation due to sulfate ions brought by the zinc salt. Zinc‐modified bentonite demonstrates an antimicrobial effect against microorganisms that are known to degrade or produce offensive odor from raw NR. Due to its antimicrobial and adsorption properties, zinc‐modified bentonite significantly reduces the offensive odor from raw NR at loadings of 2.5–7.5 phr as shown by the olfactometry test. In terms of vulcanization characteristics, the loading of zinc‐modified bentonite at 7.5 phr caused a slight decrease in elastic torque and increase in scorch and curing times of NR. The hardness and tensile properties of vulcanized NR are maintained after compounding with zinc‐modified bentonite at 7.5 phr.
15 October 2012 in Journal of the Society of Materials Science, Japan
Graphite nanoplatelets (GNPs), a functional 2D nanofiller for polymer nanocomposites, utilize natural graphite as a raw material due to its stacked graphene layers and outstanding material properties upon successful exfoliation into nano-thick sheets. However, the increasing demand for natural graphite in many industrial applications necessitates the use of graphite from waste resources. We synthesized GNPs from waste chicken feathers (WCFs) by graphitizing carbonized chicken feathers and exfoliating the graphitic carbon by high-speed homogenization and sonication. We then separated GNP from non-exfoliated carbon by centrifugation. This paper describes the morphology, chemical, and crystalline properties of WCF and its carbon derivatives, as well as the structural features of WCF-derived carbons. We obtained GNPs that have a 2D structure with huge variations in particle size and thickness. The GNP shows the presence of carbonyl groups, which are mostly attached at the edges of the stacked graphene sheets. Defects in the GNP are higher than in graphene synthesized from direct exfoliation of natural graphite but lower than in graphene oxide and reduced graphene oxide. To produce GNP of high quality from WCF, restacking of graphene sheets and concentration of carbonyls must be minimized.