Ball burnishing appears to be a very promising approach for reducing surface height, generating compressive residual stresses and increasing hardness. Ball burnishing treatment was carried out using a Haas CNC Vertical Mill Center VF-1 equipped with the Ecoroll burnishing system. After burnishing, surface topographies of machined samples and hardness were measured. Wear tests were conducted using a ball-on-disc tribotester in dry sliding conditions. During tests, the friction force was monitored as a function of time. After tests, wear volumes were determined on the basis of surface texture measurements. Tests revealed that ball burnishing in most cases resulted in minimizing friction and wear of contacting elements.
Experiments were conducted under a dry gross fretting regime. Steel discs were put in contact with ceramic balls. Before tribological tests, discs were subjected to ball burnishing with different pressures. Due to ball burnishing, a decrease in surface amplitude and an increase in microhardness occurred. Ball burnishing caused decreases in the friction force and volumetric wear of up to 45% in comparison to sliding pairs containing milled discs. The friction force and volumetric wear were higher for a higher roughness of disc.