Abdurrahman KARAMAN

Dr. Abdurrahman KARAMAN

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 February 2021 in Drvna industrija
Verified
Journal Article
Closed access
PDF file
MYMehmet Nuri Yildrim
Mehmet Nuri Yildrim
AKAbdurrahman KARAMAN
Abdurrahman KARAMAN
MZMustafa Zor
Mustafa Zor
In this study, 4 layers of 5 mm thick slats obtained by sawing method from poplar wood were used. Plain woven GRFP with low density and grammage of 100 g/m2 (Type 1) and plain woven GRFP with high density and grammage of 200 g/m2 (Type 2) were placed and glued between each layer. Polyvinyl acetate (PVAc-D4), Polyurethane (PU) and dual-component Epoxy (L285-resin and H285-hardener) adhesives were used for gluing the layers. Strength values (bending and modulus of elasticity) between the obtained layers were investigated. As a result of the study, it was determined that epoxy glue has higher strength than polyurethane and polyvinyl acetate glues; Type 2 plain woven fabric has higher strength than Type 1 plain woven fabric; and parallel load to the glue line results in higher performance than perpendicular load to the glue line.

1 June 2021 in Maderas. Ciencia y Tecnología
Verified
Journal Article
Open access
PDF file
AKAbdurrahman KARAMAN
Abdurrahman KARAMAN
This study investigated the bending moment resistance of T-type, two-pin dowel joints connected with Scotch pine dowel (Pinus slyvestris), beech dowel (Fagus orientalis), chestnut dowel (Castanea sativa) and oak dowel (Quercus petraea) and reinforced with basalt and glass woven fabric. The tests was carried out to determine the bending moment resistance of dowel joints. As a result of bending test, it was determined that one layer and two surfaces the reinforce with fiber woven fabrics increases the mechanical performance of furniture fasteners according to obtained data from tests conducted on the T-type, two pin dowel joints. The test samples prepared from the oak wooden give the higher moment values than the beech wooden. This study showed that the joining with the oak dowel was 13 % higher than the beech dowel, 32 % the chestnut dowel, and 43 % higher than the Scotch pine dowel (for the bending moment resistance), respectively. According to the bending moment resistance of the samples reinforced by fiber woven fabrics. The highest bending moment resistance value was obtained in the test specimens of reinforced with the basalt woven fabric, the lowest bending moment resistance value was obtained in the test specimens not reinforced (Control). In general, it was determined that the wood species by 3 %, wooden dowel species by 43 %, and fiber woven fabric types by 72 % have been effects on the results of the bending tests.

4 February 2021 in Wood and Fiber Science
Verified
Journal Article
Closed access
PDF file
AKAbdurrahman KARAMAN
Abdurrahman KARAMAN
In this study, the effects of the wood species of dowels and the end distance were examined relative to the moment resistance of L-type corner joints with catch connector (ClamexP14) and three different wood species of dowels were used as specimen (as used in the furniture industry). L-type joint specimens 297 mm long were tested under static diagonal compression loads for determining the bending moment capacity. The results showed that the Orientalis beech dowel had the highest bending moment resistance under compression. Regarding the end distance, the highest bending moment resistance was obtained from an end distance of 60 mm.

18 February 2021 in Wood Material Science & Engineering
Verified
Journal Article
Closed access
AKAbdurrahman KARAMAN
Abdurrahman KARAMAN
Composite materials, edge banding, and wooden dowels are being used in inner decoration and the construction of furniture frames. However, there is little information available concerning the withdrawal strength of various fasteners and in particular, dowels in these materials. The aim of this study was to determine the withdrawal strengths of PVC edge bandings with 0.8, 1, and 2 mm thicknesses, and dowels produced from six different wood species bonded parallel to the surfaces of a melamine coated medium density fiberboard (MDF-Lam) with polyvinyl acetate (PVAc-D4) or polyurethane (PU-D4). According to TS 4539 standard, the effect of wooden dowel species, thickness of edge banding, and the type of adhesives on the withdrawal strength were determined. Withdrawal strength values of polyurethane (PU-D4) were found 65% higher than the withdrawal strength values of polyvinyl acetate (PVAc-D4). The highest (8.35 N/mm2) withdrawal strength was obtained for oak dowels bonded with polyurethane (PU-D4) adhesive vertical to the surface of MDF-Lam. The lowest withdrawal strength value was obtained from the dowel produced from oak with polyvinyl acetate (PVAc-D4) adhesive in the samples without PVC edge banding. This value is higher than the predictive statement that allows designers to estimate the withdrawal strength of dowels.

21 December 2023 in Wood Research
Verified
Journal Article
Closed access
AKAbdurrahman KARAMAN
Abdurrahman KARAMAN
MYMehmet Nuri̇ Yildirim
Mehmet Nuri̇ Yildirim

27 December 2019 in Turkish Journal of Forestry | Türkiye Ormancılık Dergisi
Verified
Journal Article
Open access
PDF file
AKAbdurrahman KARAMAN
Abdurrahman KARAMAN
MYMehmet Nuri Yıldırım
Mehmet Nuri Yıldırım
EUEsra Uslu
Esra Uslu
En tr In this study, dowel tensile strength values of wooden length joints prepared using dowels obtained from ash (Fraxinus excelsior Lipsky), chestnut (Castanea sativa Mill.) and oak (Quercus petraea Lieble) were investigated. Experimental samples were prepared from Eastern beech wood. Polyurethane (PU-D4) and polyvinyl acetate (PVAc-D4) glues were used as adhesives. In the experiments, 2 types of glue, 3 species of dowel wood and a total of 60 test samples were prepared from 10 pieces of each sample. The tests were carried out under static load according to BSI 6948 standards. According to the test results, the highest dowel tensile strength value was obtained in the test specimens prepared with ash dowel and polyvinyl acetate (PVAc-D4) glue, the lowest dowel tensile strength value was obtained in the test specimens prepared using polyurethane (PU-D4) glue with chestnut dowel. Bu çalışmada, dişbudak (Fraxinus excelsior Lipsky), kestane (Castanea sativa Mill) ve Sapsız meşe (Quercus petraea Lieble) odunlarından üretilen kavelalar kullanılarak hazırlanmış ahşap boy birleştirmelerin kavela çekme direnci değerleri araştırılmıştır. Deney örnekleri, Doğu kayını odunundan hazırlanmıştır. Yapıştırıcı olarak ise poliüretan (PU-D4) ve polivinilasetat (PVAc-D4) tutkalları kullanılmıştır. Denemelerde 2 tutkal çeşidi, 3 kavela ağaç türü ve her örnekten 10 adet olmak üzere toplam 60 adet deney örneği hazırlanmıştır. Deneyler BSI 6948 standartlarına göre statik yük altında gerçekleştirilmiştir. Deney sonuçlarına göre, en yüksek kavela çekme direnci değeri dişbudak kavela ile polivinilasetat (PVAc-D4) tutkalı kullanılarak hazırlanan deney örneklerinde, en düşük kavela çekme direnci değeri ise kestane kavela ile poliüretan (PU-D4) tutkalı kullanılarak hazırlanan deney örneklerinde elde edilmiştir.