Aqueous rechargeable batteries using abundant multi‐ion cations have received increasing attention in the energy storage field for their high safety and low cost. Layered double hydroxides (LDHs) possess a two‐dimensional structure and exhibit great potential as cathodes for multi‐ion intercalation. However, the insufficient active sites of LDHs result in low capacities in the discharging process. Interestingly, the LDHs after the deprotonation process exhibit favorable electrochemical performance of multi‐cation intercalation. The deprotonation process of LDHs has been widely found in the oxygen evolution reaction and energy storage field, where LDHs lose H in laminates and converts to deprotonated γ‐phase MOOHs (MOOs). Herein, we take a comprehensive overview of the dynamics structure transformation of the deprotonation process of LDHs. Furthermore, the development of advanced aqueous battery cathode and metal battery anode based on deprotonated LDHs for energy storage is explored and summarized. Finally, the perspective of deprotonated LDHs in the energy storage field is discussed.
Fatigue damage accumulation will not only cause the degradation of material performance but also lead to the growth of effective stress and critical stiffness. However, the existing fatigue reliability models usually ignore the effective stress growth and its influence on the critical stiffness of a composite material. This study considers the combined effects of performance degradation and effective stress growth, and a pair of fatigue reliability models for a composite material are presented. Firstly, the fatigue damage in a composite material is quantified by its performance degradation, and the fitting accuracy of several typical fatigue damage models is compared. Subsequently, the uncertainties of initial strength and initial stiffness are considered, and a pair of probabilistic models of residual strength and residual stiffness are proposed. The performance degradation data of Gr/PEEK [0/45/90/−45]2S laminates are utilized to verify the proposed probabilistic models. Finally, the effective stress growth mechanism and its influence on the failure threshold are elaborated, and a pair of fatigue reliability models for composite materials are developed. Moreover, the differences between the strength-based and stiffness-based reliability analysis results of composite materials are compared and discussed.