The magneto-optical activity of high quality transparent thin films of insulating EuTiO3 (ETO) deposited on a thin SrTiO3 (STO) substrate, both being non-magnetic materials, are demonstrated to be a versatile tool for light modulation. The operating temperature is close to room temperature and allows for multiple device engineering. By using small magnetic fields birefringence of the samples can be switched off and on. Similarly, rotation of the sample in the field can modify its birefringence Δn. In addition, Δn can be increased by a factor of 4 in very modest fields with simultaneously enhancing the operating temperature by almost 100 K.
The origin of the strong piezoelectric phenomenon in (PZT) perovskites still suffers from a lack of complete understanding. It concerns the distinction between the intrinsic and extrinsic mechanisms that govern PZT's piezo activity. These two mechanisms have been investigated in single crystal at the morphotropic phase boundary. After poling in a DC electric field, the piezoelectric properties were examined on the same crystal by observing piezoelectric resonances to determine the piezoelectric coefficient and measuring quasistatic deformation to determine the coefficient . The domain populations were investigated during and after poling in a DC electric field. These populations were also investigated as a function of DC fields for strengths similar to those used to measure quasistatic piezoelectric properties for a poled crystal. The experiments indicate that the intrinsic origin of the enhancement of the piezoelectric properties is connected with a change in the population of domains with monoclinic symmetry, in which there is an easy polarization rotation under the action of the electric field.
The nature of precursor phenomena in the paraelectric phase of ferroelectrics is one of the main questions to be resolved from a fundamental point of view. Barium titanate (BaTiO3) is one of the most representative perovskite-structured ferroelectrics intensively studied until now. The pretransitional behavior of BaTiO3 single crystal grown using a solid-state crystal growth (SSCG) method was investigated for the first time and compared to previous results. There is no melting process in the SSCG method, thus the crystal grown using a SSCG method have inherent higher levels of impurity and defect concentrations, which is a good candidate for investigating the effect of crystal quality on the precursor phenomena. The acoustic, dielectric, and piezoelectric properties, as well as birefringence, of the SSCG-grown BaTiO3 were examined over a wide temperature range. Especially, the acoustic phonon behavior was investigated in terms of Brillouin spectroscopy, which is a complementary technique to Raman spectroscopy. The obtained precursor anomalies of the SSCG-grown BaTiO3 in the cubic phase were similar to those of other single crystals, in particular, of high-quality single crystal grown by top-seeded solution growth method. These results clearly indicate that the observed precursor phenomena are common and intrinsic effect irrespective of the crystal quality.
Intensive investigations of PbZr1-xTixO3 (PZT) materials with the ABO3 perovskite structure are connected with their extraordinary piezoelectric properties. Especially well known are PZT ceramics at the Morphotropic Phase Boundary (MPB), with x~0.48, whose applications are the most numerous among ferroelectrics. These piezoelectric properties are often obtained by doping with various ions at the B sites. Interestingly, we have found similar properties for undoped PZT single crystals with low Ti content, for which we have confirmed the existence of the tricritical point near x~0.06. For a PbZr0.95 ± 0.01Ti0.05∓ 0.01O3 crystal, we describe the ultrahigh strain, dielectric, optical and piezoelectric properties. We interpret the ultrahigh strain observed in the region of the antiferroelectric–ferroelectric transition as an inverse piezoelectric effect generated by the coexistence of domains of different symmetries. The complex domain coexistence was confirmed by determining optical indicatrix orientations in domains. The piezoelectric coefficient in this region reached an extremely high value of 5000 pm/V. We also verified that the properties of the PZT single crystals from the region near the tricritical point are incredibly susceptible to a slight deviation in the Ti content.
The solid solutions of PbZr1-xTixO3 (PZT) are the most known and widely applicable piezoelectric ceramic materials. The influence of different dopants on PZT properties has been studied for many years. Some of such compositions have revealed a behavior typical for ferroelectric relaxors. In the case of Pb0.75Ba0.25Zr0.70Ti0.30O3 ceramics (abbreviation PBZT 25/70/30), prepared by mixed-oxide processing technique elastic, it was found that macroscopic piezoelectric activity is present far above the temperature at which structural changes and maximum of permittivity occur in unpoled samples (~ 200 °C). Anomalies of the elastic and piezoelectric properties have been observed very clearly near the temperature of 152 °C. Within the temperature range of 152–220 °C, unstable piezoelectric properties have been detected due to the existence of polar micro/nano-clusters and non-trivial elastic-electric interactions between them, through the non-polar paraelectric matrix. The origin of such interactions could be lattice instabilities, dynamic change in polar cluster sizes, and fluctuations in chemical composition. Based on the results of the research, it can be said that PZT ceramics of such composition is a relaxor-like material and it is not a ferroelectric relaxor.