The reliability and efficiency of power grids directly contribute to the economic well-being and quality of life of citizens in any country. This reliability depends, among other things, on the power lines that are exposed to different kinds of factors such as lightning, pollution, ice storm, wind, etc. In particular, ice and snow are serious threats in various areas of the world. Under certain conditions, outdoor equipment and hardware may experience various problems: cracking, fatigue, wear, flashover, etc. In actual fact, a variety of countermeasures has been proposed over the past decades and a certain number have been applied by utilities in various countries. This contribution presents the status and current trends of different techniques against atmospheric icing of power lines. A snapshot look at some significant development on this topic over the last four decades is addressed. Engineering problems in utilizing these techniques, their applications, and perspectives are also foreseen. The latest up-to-date review papers on the applications and challenges in terms of PhD thesis, journal articles, conference proceedings, technical reports, and web materials are reported.

Despite major progress in the design of power transformers, the Achilles’ heel remains the insulation system, which is affected by various parameters including moisture, heat, and vibrations. These important machines require extreme reliability to guarantee electricity distribution to end users. In this contribution, a fiber optic sensor (FOS), consisting of a Fabry–Perot cavity made up of two identical fiber Bragg gratings (FBGs), is proposed, to monitor the temperature and vibration of power transformer windings. A phase shifted gratings recoated sensor, with multilayers of polyimide films, is used to monitor the moisture content in oil. The feasibility is investigated using an experimental laboratory transformer model, especially fabricated for this application. The moisture contents are well correlated with those measured by a Karl Fisher titrator, while the values of temperature compare well with those recorded from thermocouples. It is also shown that the sensors can be used to concurrently detect vibration, as assessed by sensitivity to the loading current. The possibility of dynamically measuring humidity, vibrations, and temperatures right next to the winding, appears to be a new insight that was previously unavailable. This approach, with its triple ability, can help to reduce the required number of sensors and therefore simplify the wiring layout.

In the last decades, a large focus is being placed on the sustainability and safety of the power transformer spectrum. Ester liquids, which have interesting properties such as high fire point and biodegradability, are gaining needed attraction. Since in-service condition, thermal aging deteriorates the physicochemical and electrical properties of liquid dielectrics, it is important to study their long-term behavior. In this contribution, the pre-breakdown and breakdown behavior of ester fluids (synthetic and natural) under AC stress are investigated. Important characteristics, such as partial discharge pre-inception voltage, partial discharge inception voltage, breakdown voltage, average streamer velocity, and inception electric field, were assessed. The influence of the radius of curvature (of high voltage needle electrode) as well as the thermal degradation of typical ester liquids are also discussed. Mineral oil was also included in the tests loop as a benchmark for comparative purposes. It is found that the pre-inception voltage of ester liquids was, in most cases, higher than that of mineral oil. For a given radius of curvature, the streamer inception and breakdown voltages decreased with thermal aging. During the streamer initiation, the electric field at the electrode tip decreased with the increase in the radius of curvature. The velocity of the streamers seems to increase with the decrease in the radius of curvature. The period of vulnerability, the so-called “delay time”, seems to be independent of the aging or the radius of curvature for a given condition of the liquid.

This paper presents a numerical investigation regarding the possibility of using electrically conductive concrete (ECON) combined with concrete-encased electrode (CEE) technology to develop new substation grounding systems (SGSs) called ECON-EE as a replacement for conventional copper or galvanized steel grounding grids. In the first step, the validation of the commercial FEM software used to perform grounding system analysis was performed in terms of the grid resistance (R_G), ground potential rise (GPR), and step and touch voltages, using a symmetrical 70 m × 70 m conventional copper SGS. Next, several numerical simulations of an ECON-EE grounding system with the same dimensions as the conventional copper grid used for FEM software validation were performed. Thus, several parameters of the ECON-EE grounding system were studied, such as the geometry, dimensions, and resistivity of ECON and the diameter of the rebar. The numerical results obtained permit us to demonstrate that ECON-EE grounding systems can perform better than conventional SGSs equipped with vertical rods, particularly in the case of high ground resistivity. Moreover, it was demonstrated that the two main ECON-EE parameters affecting the grounding resistance and the touch and step voltages are the section area and the resistivity of the ECON. As discussed in detail in this paper, the proposed ECON-EE grounding system can offer several advantages compared to conventional SGSs in terms of efficiency and durability, as well as in terms of simplicity of conception and implementation.

With the growth of the world’s population and faster-developing industries, larger amounts of electric energy are needed

Modern power networks contain an increasing amount of renewable energy resources that are connected to the grid via inverters (Inverter-Based Resources, IBR). As highlighted in the recent IEEE Standard 2800-2022, these resources behave differently compared to conventional power plants, which impact protection systems. For networks with a high proportion of IBR, existing protection systems may no longer be dependable and reliable. This research project investigated the behaviour of commercially available relays for distance protection applied to a power grid with a high proportion of IBR. A detailed numerical model was established for the power grid of the Gaspesian Peninsula in Québec, Canada, where there are numerous wind farms. Five power lines with different characteristics were selected, and 700 fault events were generated in COMTRADE format. These events were then converted into analog signals, applied to commercially available relays, and their tripping actions were analyzed. Several misoperations could be identified and classified. Proposals for improving protection performance were developed and validated with the experimental setup. This project highlights the importance of validating and eventually adapting the protection systems in power grids with a high proportion of IBR, as existing protection systems may be prone to misoperate. Various solutions are proposed to ensure the dependability and reliability of protection systems in modern power grids.