Taming the Terahertz waves (100 GHz–10 THz) is considered the next frontier in wireless communications. While components for the ultra-high bandwidth Terahertz wireless communications were in rapid development over the past several years, however, their commercial availability is still lacking. Nevertheless, as we demonstrate in this paper, due to recent advances in the microwave and infrared photonics hardware, it is now possible to assemble a high-performance hybrid THz communication system for real-life applications. As an example, in this paper, we present the design and performance evaluation of the photonics-based Terahertz wireless communication system for the transmission of uncompressed 4K video feed that is built using all commercially available system components. In particular, two independent tunable lasers operating in the infrared C-band are used as a source for generating the Terahertz carrier wave using frequency difference generation in a photomixer. One of the IR laser beams carries the data which is intensity modulated using the LiNbO 3 electro-optic modulator. A zero bias Schottky diode is used as the detector and demodulator of the data stream followed by the high-gain and low-noise pre-amplifier. The Terahertz carrier frequency is fixed at 138 GHz and the system is characterized by measuring the bit error rate for the pseudo random bit sequences at 5.5 Gbps. By optimizing the link geometry and decision parameters, an error-free ( $\text {BER} < 10^{-10}$ ) transmission at a link distance of 1 m is achieved. Finally, we detail the integration of a professional 4K camera into the THz communication link and demonstrate live streaming of the uncompressed HD and 4K video followed by the analysis of link quality.
Terahertz (THz) band (0.1–10 THz) is the next frontier for ultra-high-speed communication systems. Currently, most of communications research in this spectral range is focused on wireless systems, while waveguide/fiber-based links have been less explored. Although free space communications have several advantages such as convenience in mobility for the end user, as well as easier multi-device interconnectivity in simple environments, fiber-based communications provide superior performance in certain short-range communication applications such as multi-device connectivity in complex geometrical environments (ex., intra-vehicle connectivity) and secure communications with low probability of eavesdropping, as well as secure signal delivery to hard-to-reach or highly protected environments. In this work, we present an in-depth experimental and numerical study of the short-range THz communications links that use subwavelength dielectric fibers for information transmission and define the main challenges and trade-offs in the link implementation. Particularly, we use air or foam-cladded polypropylene-core subwavelength dielectric THz fibers of various diameters (0.57–1.75 mm) to study link performance as a function of the link length of up to , and data bit rates of up to 6 Gbps at the carrier frequency of 128 GHz (2.34 mm wavelength). We find that depending on the fiber diameter, the quality of the transmitted signal is mostly limited either by the modal propagation loss or by the fiber velocity dispersion (GVD). An error-free transmission over 10 m is achieved for the bit rate of 4 Gbps using the fiber of smaller 0.57 mm diameter. Furthermore, since the fields of subwavelength fibers are weakly confined and extend deep into the air cladding, we study the modal field extent outside of the fiber core, as well as fiber bending loss. Finally, the power budget of the rod-in-air subwavelength THz fiber-based links is compared to that of free space communication links, and we demonstrate that fiber links offer an excellent solution for various short-range applications.
While in most existing terahertz communications systems, the THz carrier wave is transmitted via free-space channels, the THz waveguide-based integrated solutions can be of great utility at both the transmitter and receiver ends, thus simplifying the miniaturization and mass production of cost-effective THz communications systems. Here we present a new type of modular THz integrated circuits based on the two-wire plasmonic waveguide components fabricated using a combination of stereolithography (SLA) 3D printing, wet chemistry metal deposition, and hot stamping techniques. Particular attention is paid to the design of the optical circuits based on the two-wire waveguides suspended inside a protective micro-sized enclosure. Such waveguides feature low transmission and bending losses, as well as low dispersion. Using such waveguides as basic building blocks, we then demonstrate several key optical subcomponents, such as low-loss broadbandcouplers that use two coalescing two-wire waveguide bends, as well as broadband waveguide Bragg gratings that feature a paper sheet with a periodic sequence of metal strips inserted into the air gap of a two-wire waveguide. Finally, using these developed subcomponents, a two-channel add-drop multiplexer is demonstrated to operate at 140 GHz. We believe that the reported micro-encapsulated two-wire waveguide-based modular platform can have a strong impact on the field of THz signal processing and sensing due to the ease of device fabrication and handling, high degree of reconfigurability, and high potential for real-time tunability.
Terahertz (THz) spectrum (100 GHz-10 THz) is considered the next frontier in the design of high-speed wireless communication systems. While the high-power THz sources have commercially become available, it increases the possibility of developing THz jammers to disrupt the THz communication link. Therefore, the development of novel anti-jamming solutions is the need of the hour. In this work, we present the photonics-based THz communication system and demonstrate the frequency hopping spread spectrum (FHSS) technique which acts against the single/multi-tone jamming attack in the frequency window of 110 GHz-170 GHz. By tuning the output wavelength of the distributed feedback lasers, the THz carrier frequencies are swept back and forth within the scanning window. The frequency tuning range was measured for different scanning rates of the laser which decreases rapidly with the increase in the scanning rate. Next, we demonstrate the THz FHSS technique in a real-time communication system by transmitting a 6 Gbps NRZ signal in both wireless and THz-fiber-based links within the link distance of 1.75 m. We experimentally found that the measured bit error rate in the THz FHSS system is the time average of the measured BER for individual carrier frequencies within the hopping frequency window. By combining with the forward error correction codes and by using the tunable filter in the receiver, we believe that the proposed technique will offer a novel and compact solution against the single/multi-tone jammer for high-bit rate THz communications.
A hollow-core Bragg waveguide-based resonant fluidic sensor operating in the terahertz frequency band is studied. A fused deposition modeling 3D printing technique with a Polylactic Acid filament is employed to fabricate the sensor where the liquid analyte is flowing in the microfluidic channel integrated into the waveguide cladding. The fluidic channel supports a resonant defect state which is probed spectrally using the core-guided mode of the Bragg waveguide. Continuous-wave terahertz spectroscopy is used to characterize the fluidic sensor. The measured signal amplitude shows a dip in the transmission spectrum, while the measured phase shows a sharp change in the vicinity of the anticrossing frequency whose spectral position depends strongly on the real part of the analyte refractive index. The sensor spectral response is further optimized by tailoring the waveguide length and position of the defect layer. Consistent with the results of numerical modeling, the measured sensor sensitivity is ~110 GHz/RIU, while the sensor resolution ~0.0045 RIU is limited by the parasitic standing waves in the spectrometer cavity. We believe that the proposed fluidic sensor opens new opportunities in applied chemical and biological sensing as it offers a non-contact measurement technique for monitoring refractive index changes in flowing liquids.
Turmeric is a common spice used as a vital ingredient in Ayurvedic medicines and food. Adulteration of turmeric with chalk powder causes severe health problems in humans. Conventional methods of identifying adulterants via chemical reactions are inaccurate. Here, we use Terahertz spectroscopy to effectively identify adulteration of turmeric with chalk powder. This method shows good potential for non-intrusive detection of adulterated spices and foods in packages.