Soybean dreg is a by-product of soybean products production, with a large consumption in China. Low utilization value leads to random discarding, which is one of the important sources of urban pollution. In this work, porous biochar was synthesized using a one-pot method and potassium bicarbonate (KHCO₃) with low-cost soybean dreg (SD) powder as the carbon precursor to investigating the adsorption of methylene blue (MB). The prepared samples were characterized with scanning electron microscopy (SEM), transmission electron microscopy (TEM), elemental analyzer (EA), Brunauer-Emmett-Teller (BET), X-ray diffractometer (XRD), Raman spectroscopy (Raman), Fourier transform infrared spectrometer (FTIR), and X-ray photoelectron spectroscopy (XPS). The obtained SDB-K-3 showed a high specific surface area of 1620 m² g⁻¹, a large pore volume of 0.7509 cm³ g⁻¹, and an average pore diameter of 1.859 nm. The results indicated that the maximum adsorption capacity of SDB-K-3 to MB could reach 1273.51 mg g⁻¹ at 318 K. The kinetic data were most consistent with the pseudo-second-order model and the adsorption behavior was more suitable for the Langmuir isotherm equation. This study demonstrated that the porous biochar adsorbent can be prepared from soybean dreg by high value utilization, and it could hold significant potential for dye wastewater treatment in the future.

Dietary habits have a substantial influence on both planet and individual health. High intake of animal products has significant negative effects on the environment and on human health; hence, a reduction in meat consumption is necessary. The transition towards plant-based meat (PBM) is one of the potential solutions for environmental and health issues. To achieve this goal, it is important to understand the dietary habits and demands of consumers. This review was designed with a focus on PBM alternatives, dietary shifts during the COVID-19 pandemic, the drivers of consumers’ perceptions in various countries, and the measures that can promote the shift towards PBM. The PBM market is predicted to grow with rising awareness, familiarity, and knowledge in the coming years. Companies must focus on the categories of anticipated benefits to aid consumers in making the switch to a diet higher in PBM alternatives if they want to win over the target market.

Calcium is one of the most important mineral elements in the human body and is closely related to the maintenance of human health. To prevent calcium deficiency, various calcium supplements have been developed, but their application tends to be limited by low calcium content and highly irritating effects on the stomach, among other side effects. Recently, calcium–peptide chelates, which have excellent stability and are easily absorbed, have received attention as an alternative emerging calcium supplement. Calcium-binding peptides (CaBP) are usually obtained via the hydrolysis of animal or plant proteins, and calcium-binding capacity (CaBC) can be further improved through chromatographic purification techniques. In calcium ions, the phosphate group, carboxylic group and nitrogen atom in the peptide are the main binding sites, and the four modes of combination are the unidentate mode, bidentate mode, bridging mode and α mode. The stability and safety of calcium–peptide chelates are discussed in this paper, the intestinal absorption pathways of calcium elements and peptides are described, and the bioavailability of calcium–peptide chelates, both in vitro and in vivo, is also introduced. This review of the research status of calcium–peptide chelates aims to provide a reasonable theoretical basis for their application as calcium supplementation products.

A novel porous carbon adsorbent for the removal of deoxynivalenol was prepared from soybean dreg (SD). The new material was characterized by scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (SEM-EDS), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) analysis, N₂ adsorption/desorption measurement techniques, X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). The specific surface area of the SDB-6-KOH was found to be 3655.95 m² g⁻¹, the pore volume was 1.936 cm³ g⁻¹ and the average pore size was 2.125 nm. The high specific surface area and effective functional groups of the carbon material promoted the adsorption of deoxynivalenol. By comparing the adsorption effect of SDB-6-X prepared with different activators (X: KOH, K₂CO₃, KHCO₃), SDB-6-KOH had the highest adsorption capacity. The maximum adsorption capacity of SDB-6-KOH to deoxynivalenol was 52.9877 µg mg⁻¹, and the removal efficiency reached 88.31% at 318 K. The adsorption kinetic and isotherm data were suitable for pseudo-second-order and Langmuir equations, and the results of this study show that the novel carbon material has excellent adsorptive ability and, thus, offers effective practical application potential for the removal of deoxynivalenol.

Soybean trypsin inhibitor (STI) was obtained from simulated soybean whey wastewater through a sustainable method consisting of isoelectric precipitation, ammonium sulfate salting out, and gel filtration chromatography, and the effect of temperature, pH, and pepsin on the stability of STI was also discussed. The results showed that the recovery rate of the trypsin inhibitory activity was 89.47%, the purity and the specific activity of STI were 71.11%, and 1442.5 TIU/mg in the conditions of pH 4.0 and 40% ammonium sulfate saturation. The soybean Kunitz trypsin inhibitor (KTI) and soybean Bowman–Brik trypsin inhibitor (BBI) were obtained via gel filtration chromatography, and their specific activity levels were 1733.5 TIU/mg and 2588.3 TIU/mg, respectively. The STI displayed good stability over a wide temperature and pH range. The STI, KTI, and BBI were all resistant to pepsin hydrolysis, and their ability was ranked as BBI > STI > KTI. These findings will provide a theoretical basis for recycling STI from soybean whey wastewater and promoting better active compound utilization.

Aflatoxin B₁ (AFB₁) is a highly toxic carcinogen severely harmful to humans and animals. This study fabricated SDB-6-K-9@TiO₂ composites via the hydrothermal synthesis method to reduce AFB₁. The structural characterization results of the photocatalytic composites showed that TiO₂ was successfully loaded onto SDB-6-K-9. The different photocatalytic degradation conditions, photocatalyst kinetics, recycling performance, and photocatalytic degradation mechanism were investigated. Photocatalysis with 6 mg of 4%SDB-6-K-9@TiO₂ in a 100 μg/mL AFB₁ solution presented a reduction of over 95%, exhibiting excellent performance, high stability, and reusability even after five cycles of photocatalytic experiments. Active species trapping experiments confirmed that holes (h⁺) played the most critical role. After structural analysis and identification of the photocatalytic degradation products, the photodegradation path and photocatalytic oxidation mechanism of 4%SDB-6-K-9@TiO₂ were postulated. The results show a new way to improve TiO₂’s photocatalytic performance, providing a certain theoretical basis for the effective AFB₁ reduction.