This paper investigates the torsional dynamic response of a single pile with a circular cross-section embedded in multi-layered soils. The energy principles and variational approach are employed to establish the governing equations of the pile-soil system subjected to dynamic torque applied at the pile head in the frequency domain. The proposed solution is based on the finite element method for a bar on an elastic foundation to provide the torsional dynamic subgrade reaction, angle of twist, torque along the pile and the torsional impedance at the pile head. The accuracy of the proposed method is verified by comparing the analysis results with those of existing analytical solutions. Parametric studies are also performed to investigate the influence of the soil properties and the excitation frequencies on the stiffness and radiation damping of the pile-soil system.
A new algorithm is developed to automatically detect rebar locations and diameters of reinforced concrete structures using the ground penetrating radar technique. The study uses two-way travel time and biquadratic equations to formulate electromagnetic wave speed in reinforced concrete structures where hyperbolic signatures are approximated. Leveraging an established algorithm, a computer code has been developed to offer automated analysis of ground-penetrating radar data obtained from survey grids. Four reinforced concrete slabs were designed, fabricated, and tested to validate the developed evaluation approach. The proposed methodology demonstrates outstanding signal processing proficiency and reliably and effectively identifies rebar information.
Anchor bolts, such as rock bolts and concrete anchors, are widely used in civil, geotechnical, and mining engineering for anchorage and ground support. They are used in retaining walls, dry docks, dams, mines, and prestressed concrete structures. Evaluating the grouting condition of anchor bolts is essential to ensure the safety of these applications. Spectrum techniques have been used to develop non-destructive methods for estimating the grouting quality of grouted anchor bolts. The spectrum methods include fast Fourier transform, time–frequency analysis, wavelet transform analysis, and empirical mode decomposition. In this study, we introduce the parameter-optimized variational mode decomposition (VMD) method for the spectrum analysis of impact echo signals of anchor bolts. This method overcomes the difficulty of conventional spectrum methods that cannot separate highly coupled natural modes for advanced analysis. The parameter-optimized VMD method enables the generation of a new evaluation index for quantifying bolt grouting conditions, which has the potential to significantly enhance the quality evaluation of anchor bolts compared with conventional analysis of natural frequencies. This study uses impact response to establish a new benchmark for the integrity diagnosis of anchor bolts, paving the way for more accurate and reliable safety assessments.
This paper presents a study to accurately evaluate defects in concrete decks using ultrasonic pulse-echo signals. A reinforced concrete deck with void defects was designed and evaluated for validation, and a commercial ultrasonic pulse-echo (UPE) device was used to obtain the 2D images of the void defect inside the deck. The UPE image is based on the ultrasonic shear-wave test method and an extended synthetic aperture focusing technique (SAFT). To enhance the accuracy of the defect location in the SAFT imaging, the recorded A-scan data from UPE was analyzed using an advanced denoising approach and defect echo peak extraction, which are based on empirical modal decomposition, Hurst exponent characterization, and Hilbert envelope estimation. The results demonstrated that the location and depth of the void defect in the deck can be accurately assessed by using the developed approach. The new method provides quantitative information of the anomalies inside the deck, which can be used to calibrate the qualitative images of UPC devices with the SAFT.
A new algorithm is developed in this study to automatically detect reinforced concrete structures' rebar locations and diameters using the ground penetrating radar technique. The method approximates the hyperbolic signatures using two-way travel time and bi-quadratic equations. The study includes formulating electromagnetic wave speed in reinforced concrete (RC) structures. The algorithm was used in a computer code to provide an automated analysis of ground-penetrating radar data collected from a pre-planned survey grid. Two RC slabs were fabricated and tested to validate the proposed method. The proposed method is efficient in signal processing and accurately and reliably determining the rebar information.
This study focused on analyzing the impact of ground-penetrating radar (GPR) scan spacing on accurately assessing the reinforcement of concrete bridge girders, providing practical insights. A decommissioned bridge box beam was evaluated to unveil rebars and tendons’ depth and spacing. The box beam was decommissioned from the West Virginia Division of Highways inventory. An innovative algorithm was developed to fully automate the analysis of survey grid data across all sides of the beam. Implementing this algorithm into a computer code has paved the way for comprehensive automation of GPR data analyses. Comparing GPR data analyses from various profile line offsets, this study assists in producing optimal protocols for inspecting box beams. Transverse profile line offsets between 4 in. and 24 in. yielded nearly identical results, setting a new standard for precision. Utilizing more than one longitudinal profile line was highly beneficial in accurately assessing prestressed concrete box beams. This research helps redefine bridge evaluation by precisely finding rebar spacing, concrete cover, and other internal characteristics. This study’s findings offer invaluable advancements and equip state departments of transportation with the knowledge to accurately assess in-service concrete bridge box beams, empowering them to make informed decisions.