Alkaline treatment has been extensively implemented in the extraction process of hydroxyapatite (HAp) extraction from various kinds of bio-materials, such as animal bone and scales. The main purpose of such treatment is to remove proteinaceous substances from raw materials. The influence of the alkaline treatment that could alter not only the organic contents but also chemical composition—specifically the Ca/P mole ratios of bio-calcium, HAp, and the biphasic apatite powders derived from salmon bone, a by-product from the salmon industry—was investigated. Both HAp and biphasic apatite powders were obtained from the calcination of bio-calcium powders with and without alkaline treatment, respectively. An X-ray diffraction analysis confirmed the presence of hydroxyapatite and β-tricalcium phosphate (β-TCP) in the calcined bone powder without alkaline treatment while only a single phase of hydroxyapatite was observed in the alkaline-treated sample. Calcium and phosphorus contents were measured by an inductively coupled plasma optical emission spectrometer (ICP-OES). A variation of Ca/P ratios was observed among all samples, depending on the chemical and heat treatment conditions. Organic molecules, such as protein, fat, hydroxyproline, and TBARS, were significantly lowered in bio-calcium powders with the alkaline treatment. This work represents important research on chemical treatment prior to the raw material conversion process, which significantly influences chemical and phase compositions of the bio-calcium and hydroxyapatite powder derived from salmon bone waste.
The effects of Asian sea bass (Lates calcarifer) bio-calcium (ASBB) at different levels (0, 2, 4, 6, 8, and 10%) (w/w) on properties of threadfin bream (Nemipterus sp.) surimi gel were investigated. ASBB addition increased breaking force and deformation, while reduced expressible moisture content (p < 0.05) of surimi gel. L* (lightness), a* (redness), and b* (yellowness) values were increased with augmenting ASBB levels; however, whiteness slightly decreased in surimi gel incorporated with ASBB (p < 0.05). Higher likeness scores were noticed in surimi gel containing ASBB, compared to that of the control. However, a slight decrease in the likeness score was noticed in surimi gel with 10% (w/w) ASBB (p < 0.05). Surimi gel added with 8% (w/w) ASBB possessed the increase in breaking force by 80% from the control and had the highest likeness score. Texture profile analysis of surimi gel added with ASBB showed the improved texture characteristics with coincidentally higher storage modulus of surimi paste. Surimi gel with 8% (w/w) ASBB had a denser and finer microstructure with higher ash, calcium, and phosphorous contents, compared to the control. Thus, incorporation of bio-calcium up to 8% (w/w) not only increased mineral content, but also improved textural, sensory, and microstructural properties of surimi gel.
The effects of ultrasonication and drying method on particle size and other product characteristics of bio‐calcium powder from Asian sea bass (Lates calcarifer) backbone were investigated. Ultrasonication was performed at different amplitudes (60%, 70%, and 80%) for varying periods (15 and 30 min). Ultrasonication at higher amplitudes for a longer time reduced the powder particle size more effectively (p < .05), but had no impact on zeta potential (p > .05). The bio‐calcium powder ultrasonicated at 70% amplitude for 15 min had the smallest particle size (3.38 µm) when compared to the control (28.85 µm). When the ultrasonicated bio‐calcium was subjected to drying, freeze‐drying produced powders with higher calcium solubility but lower whiteness than hot air (tray) drying. The results suggest that the ultrasonication is a potential suitable method to reduce the size of bio‐calcium powders, while the drying method slightly affected the product characteristics. The bio‐calcium powder could serve as a suitable functional ingredient for food fortification aimed at improving the calcium bioavailability. Particle size of bio‐calcium powder from fishbone could affect the mouth feel and calcium solubility when used for food product fortification. This work showed that ultrasonication could be used to obtain up to 10‐fold reduction in the particle size of fishbone bio‐calcium powders, which promotes increased calcium solubility when subjected to simulated gastrointestinal tract digestion. Few differences in characteristics of the bio‐calcium powder were observed for freeze‐dried and hot air‐dried samples. Thus, an economical, safe, and fast process can be implemented for the production of small particle size bio‐calcium powder from fishbone.
Asian sea bass scales discarded from the fish processing industry contain collagen and calcium. The production of biocalcium can increase their value. The effect of alkaline pretreatment on non-collagenous protein removal from scales was investigated. The alkaline pretreatment of scales was optimal when 2 M NaOH solution was used for 10 min. The impacts of heating processes of varying times on chemical compositions and characteristics of biocalcium (BC) powder from alkali-pretreated scales were also studied. A lower loss of hydroxyproline (HYP) and decreased hardness of scales were obtained when the scales were treated with a boiling process. BC powders from the scales subjected to boiling (B-BC) had higher yield and HYP content than BC powders using a high-pressure heating (HP-BC) process. An augmented heating time (10–30 min) lowered yield, HYP, moisture, and protein contents in BC powder regardless of the heating processes. HP-BC powder had higher ash, calcium, and phosphorus contents than B-BC powder. A whiter color and larger mean particle size were attained for the B-BC powders. X-ray diffractograms revealed that all BC powders had hydroxyapatite, which had a crystallinity of 53.60–66.54%, as a major component. FTIR spectra confirmed that all BC powders comprised proteins and inorganic matter. BC powder from scales with high yield and satisfactory characteristics could be used in calcium supplements.
17 October 2022 in Journal of the American Oil Chemists' Society
Pre-cooked bone is a waste product generated during tuna processing and can serve as a potential source of biocalcium (BC). Generally, non-collagenous protein and fat must be removed properly from bone. A NaCl solution can be used to remove such proteins, while fish lipase can be used in a green process, instead of solvent, for fat removal. Thus, this study aimed to investigate the impact of NaCl pretreatment at different concentrations in combination with heat to eliminate non-collagenous proteins, and to implement fish lipase treatments at varying levels for fat removal, for BC production from pre-cooked tuna bone. Optimal NaCl pretreatment of bone was achieved when a 5% NaCl solution at 80 °C was used for 150 min. The lowest lipid content was obtained for bone defatted with crude lipase extract (CLE) at 0.30 Unit/g of bone powder for 2 h. BC powder from bone defatted with CLE (DF-BC) possessed greater contents of ash, calcium, and phosphorus and smaller particle sizes than the control BC powder. X-ray diffractograms suggested that both BC powders consisted of hydroxyapatite as a major compound, which had a crystallinity of 62.92–63.07%. An elemental profile confirmed the presence of organic and inorganic matter. Thus, BC powder could be produced from pre-cooked tuna bone using this ‘green process’.