The effect of simultaneous alignment of polyethylene (PE) lamellae and graphene nanoplatelets (GnP) on the thermal conductivity (k) of PE–GnP composites is investigated. Measurements reveal a large increase of 1100% in k of the aligned PE–GnP composite using 10 wt% GnPs relative to unoriented pure PE. The rate of increase of k with applied strain for the pure PE–GnP composite with 10 wt% GnP is found to be almost a factor of two higher than the pure PE sample, pointing to the beneficial effect of GnP alignment on k enhancement. Aligned GnPs are further found to be 3 times as effective in enhancing k as in the randomly oriented configuration. Enhancement in k is correlated with the alignment of PE lamellae and GnPs through wide-angle X-ray scattering and polarized Raman spectroscopy. At the maximum applied strain of 400% and using 10 wt% GnPs, a composite k of 5.9 W mK−1 is achieved. These results demonstrate the great potential of simultaneous alignment effects in achieving high k polymer composites.
15 March 2022 in ACS Applied Materials & Interfaces
One of the main loss mechanisms in photovoltaic solar cells is the thermalization of photogenerated hot carriers via phonon-mediated relaxation. By inhibiting these relaxation mechanisms and reducing thermalization losses, it may be possible to improve the power conversion efficiency of solar cells beyond the single gap limit. Here, type-II InAs/AlAsSb multi-quantum well (MQW) structures are investigated to study the impact of the phononic properties of the AlAsSb barrier material in hot carrier thermalization. Experimental and theoretical results show that by increasing the barrier thickness (increasing the relative contribution of AlAsSb content in the superlattices), the relaxation of hot carriers is reduced as observed in power-dependent photoluminescence and thermalization analysis. This is attributed to an increase in the phononic bandgap of the MQW with increasing AlAsSb composition reducing the efficiency of the dominant Klemens mechanism as the phononic properties shift toward a more AlSb-like behavior.
We find using first-principles analysis of thermal conductivity (k) in isotopically pure Gallium nitride (GaN) that almost 60% of the heat is conducted by phonons in a very narrow frequency range of 5–7 THz (spanning only 9% of the frequencies in GaN). This spectral focusing of thermal conductivity is found to be due to a combination of two effects—a large increase in lifetimes of phonons through suppression of anharmonic scattering in the 5–7 THz frequency range coupled with a large phonon density of states at the same frequencies. Understanding of the effect is provided by solving the phonon Boltzmann transport equation in the single mode relaxation time approximation along with the use of harmonic and anharmonic force constants derived from density functional theory. The results can have important implications for engineering the thermal performance of devices based on GaN.
Thermal conductivity (k) of polymers is usually limited to low values of ~0.5 Wm−1K−1 in comparison to metals (>20 Wm−1K−1). The goal of this work is to enhance thermal conductivity (k) of polyethylene–graphene nanocomposites through simultaneous alignment of polyethylene (PE) lamellae and graphene nanoplatelets (GnP). Alignment is achieved through the application of strain. Measured values are compared with predictions from effective medium theory. A twin conical screw micro compounder is used to prepare polyethylene–graphene nanoplatelet (PE-GnP) composites. Enhancement in k value is studied for two different compositions with GnP content of 9 wt% and 13 wt% and for applied strains ranging from 0% to 300%. Aligned PE-GnP composites with 13 wt% GnP displays ~1000% enhancement in k at an applied strain of 300%, relative to k of pristine unstrained polymer. Laser Scanning Confocal Microscopy (LSCM) is used to quantitatively characterize the alignment of GnP flakes in strained composites; this measured orientation is used as an input for effective medium predictions. These results have important implications for thermal management applications.
We demonstrate in this work that expanded graphite (EG) can lead to a very large enhancement in thermal conductivity of polyetherimide−graphene and epoxy−graphene nanocomposites prepared via solvent casting technique. A k value of 6.6 Wm−1K−1 is achieved for 10 wt% composition sample, representing an enhancement of ~2770% over pristine polyetherimide (k~0.23 Wm−1K−1). This extraordinary enhancement in thermal conductivity is shown to be due to a network of continuous graphene sheets over long−length scales, resulting in low thermal contact resistance at bends/turns due to the graphene sheets being covalently bonded at such junctions. Solvent casting offers the advantage of preserving the porous structure of expanded graphite in the composite, resulting in the above highly thermally conductive interpenetrating network of graphene and polymer. Solvent casting also does not break down the expanded graphite particles due to minimal forces involved, allowing for efficient heat transfer over long−length scales, further enhancing overall composite thermal conductivity. Comparisons with a recently introduced effective medium model show a very high value of predicted particle–particle interfacial conductance, providing evidence for efficient interfacial thermal transport in expanded graphite composites. Field emission environmental scanning electron microscopy (FE−ESEM) is used to provide a detailed understanding of the interpenetrating graphene−polymer structure in the expanded graphite composite. These results open up novel avenues for achieving high thermal conductivity polymer composites.