Zirconium–Copper-based metallic glass thin films represent promising coatings in the biomedical sector for their combination of antibacterial property and wear resistance. However, finding a Zr–Cu metallic glass composition with desirable cytocompatibility and antibacterial property is extremely challenging. In this work, we have created a cytocompatible and (super-)hydrophobic Zr–Cu–Ag metallic glass coating with ≈95% antifouling properties. First, a range of different chemical compositions were prepared via Physical Vapor Deposition magnetron by co-sputtering Zr, Cu, and Ag onto a Polybutylene terephthalate (PBT) substrate among which Zr_93·5Cu_6·2Ag_0.2, Zr_76·7Cu_22·7Ag_0.5, and Zr_69·3Cu_30·1Ag_0.6 were selected to be further investigate for their surface properties, antibacterial activity, and cytocompatibility. Scanning electron microscopy (SEM) images revealed a micro-roughness fibrous structure holding superhydrophobic properties demonstrated by specimens' static and dynamic contact angle measurements ranging from 130° to 150°. The dynamic contact angle measurements have shown hysteresis below 10° for all coated samples which indicated the superhydrophobicity of the samples. To distinguish between antifouling and bactericidal effect of the coating, ions release from coatings into Luria Bertani Broth (LB), and Dulbecco's Modified Eagle Medium (DMEM) solutions were evaluated by inductively coupled plasma mass spectrometry (ICP-MS) measurements after 24 ​h and 5 days. Antifouling properties were evaluated by infecting the specimens' surface with the Gram-positive Staphylococcus aureus and the Gram-negative Escherichia coli strain reporting a ≈95% reduction of bacteria adhesion as visually confirmed by FESEM and fluorescent live/dead staining. Human mesenchymal stem cells (hMSC) were used for direct cytocompatibility evaluation of coated samples and their metabolic activity was evaluated via relative fluorescence unit after 24 ​h and 5 days confirming that it was comparable to the controls (>97% viable cells). The results were further visualized by FESEM, fluorescent staining by Live/Dead Viability/Cytotoxicity Kit and confirmed the cytocompatibility of all coated samples. Finally, hMSC′ cytoplasm was stained by May Grunwald and Giemsa after 5days to detect and visualize the released ions which have diffused through the cells' membrane.

Brazing of Al-alloys is of interest in many application fields (e.g., mechanical and automotive). The surface preparation of substrates and the in depth investigation of the interface reaction between aluminum substrates and brazing materials is fundamental for a proper understanding of the process and for its optimization. The interaction between two aluminum based substrates (Al5182 and Al6016) and two studied brazing materials (pure Zn and for the first time ZAMA alloy) has been studied in simulated brazing condition in order to define the best surface preparation conditions and combination substrate-brazing material to be used in real joining experiments. Three different surface preparations were considered: polishing and cleaning, application of flux and vacuum plasma etching (Ar) followed by sputtering coating with Zn. Macroscopic observation of the samples surface after “brazing”, optical microscopy, and microhardness measurements on the cross-section and XRD measurements on the top surface gave a comprehensive description of the phenomena occurring at the interface between the substrate and the brazing alloy which are of interest to understand the brazing process and for the detection of the best conditions to be used in brazing. Plasma etching (Ar) followed by sputtering coating with Zn resulted a promising solution in case of Al5182 brazed with Zn, while the addition of flux was more effective in case of Al6016 substrate. ZAMA alloy demonstrated good interface reactivity with both Al6016 and Al5182 alloys, particularly on only cleaned surfaces.

Alumina dispersion-strengthened copper, Glidcop, is used widely in high-heat-load ultra-high-vacuum components for synchrotron light sources (absorbers), accelerator components (beam intercepting devices), and in nuclear power plants. Glidcop has similar thermal and electrical properties to oxygen free electrical (OFE) copper, but has superior mechanical properties, thus making it a feasible structural material; its yield and ultimate tensile strength are equivalent to those of mild-carbon steel. The purpose of this work has been to develop a brazing technique to join Glidcop to Mo, using a commercial Cu-based alloy. The effects of the excessive diffusion of the braze along the grain boundaries on the interfacial chemistry and joint microstructure, as well as on the mechanical performance of the brazed joints, has been investigated. In order to prevent the diffusion of the braze into the Glidcop alloy, a copper barrier layer has been deposited on Glidcop by means of RF-sputtering.