Si-based anodes for Li-ion batteries (LIBs) are considered to be an attractive alternative to graphite due to their higher capacity, but they have low electrical conductivity and degrade mechanically during cycling. In the current study, we report on a mass-producible porous Si-CoSi2-C composite as a high-capacity anode material for LIBs. The composite was synthesized with two-step milling followed by a simple chemical etching process. The material conversion and porous structure were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, and electron microscopy. The electrochemical test results demonstrated that the Si-CoSi2-C composite electrode exhibits greatly improved cycle and rate performance compared with conventional Si-C composite electrodes. These results can be ascribed to the role of CoSi2 and inside pores. The CoSi2 synthesized in situ during high-energy mechanical milling can be well attached to the Si; its conductive phase can increase electrical connection with the carbon matrix and the Cu current collectors; and it can accommodate Si volume changes during cycling. The proposed synthesis strategy can provide a facile and cost-effective method to produce Si-based materials for commercial LIB anodes.
10 February 2023 in International Journal of Energy Research
Porous polyethylene (PE) polymer film is a representative material for separators in Li-ion batteries (LIBs). Although PE separators are widely used in commercial LIBs owing to several advantages such as chemical stability, low cost, and good processability, the material still suffers from poor wettability to organic liquid electrolytes and low thermal stability. In this study, a facile surface modification method via the nucleophilic addition of amine in a solution is proposed. To improve the electrolyte wettability and thermal stability of the PE separators, a carbonyl group (C=O) was introduced onto the surface by pretreatment. Then, an imine functional group (RN=C) was created by the conversion reaction between the carbonyl and amine groups (R-NH2) in a poly(ethylene glycol) bis(amine) solution. By including the formed imine group onto the surface, the surface-modified PE separator exhibited enhanced wettability and thermal stability. The chemical surface treatment transformed the PE separator from hydrophobic to hydrophilic, resulting in the increased ionic conductivity of the electrolyte and rate capability of the cells without any negative effect on the physical and electrochemical properties of the separator.
Antimony (Sb)-based materials are considered to be attractive for use in Li secondary battery anodes because of their high capacity. However, their huge volume change during Li insertion-extraction cycling limits their cycle performance. The Sb-active material can be combined with intercalation-based active materials to address these issues. In this study, spherical Sb core/Nb2O5 shell structured composite materials were synthesized through a simple solvothermal process and a carbon coating was simultaneously added during heat treatment using a naphthalene precursor. The resulting double-shelled materials were characterized with X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, and electron microscopy. The electrochemical test results showed that a reversible capacity of more than 450 mAh g−1 was retained after 100 cycles. This improved performance is ascribed to the double-shelled structure. The large volume change of the nano-sized Sb core material was alleviated by the double-shelled structure, which consisted of crystalline orthorhombic Nb2O5 and amorphous carbon. The shell materials also aided rapid charge transport.