The Adriatic microplate has always attracted scientific attention, and various studies on the geodynamics of this area have been performed over the years. With the development of global navigation satellite system (GNSS) technology in the last 30 years, most significant research in this field has used it as the primary source of data on geodynamic movements. However, apart from a few global positioning system (GPS) campaigns conducted in the 1990s, the measurements had a low spatiotemporal density. Therefore, the eastern side of the Adria region or the territory of the Republic of Croatia was usually omitted from the results presented in the various published papers. A study of this literature concluded that the territory of Croatia represents a kind of scientific gap and that denser measurement data from GPS/GNSS stations could be used to supplement the geodynamic picture of the area in question. Thus, GPS/GNSS measurements from 83 stations (geodynamic, reference, and POS’ GPS/GNSS) all over Croatia and neighboring countries for a period of almost 20 years (1994–2013) were collected and processed with Bernese software to obtain a unique database of relative velocities. From the geological perspective, the most important and latest insights on the recent geological structural setting, tectonic movements, most active faults, and relationships and movements of structures were taken into account. It was important to compare the geodetic and geological data, observe the present tectonic dynamics of the geological structural setting, and determine the causes of the obtained directions of movement. The research presented in this paper, based on a combination of geodetic and geological data, was conducted to broaden the current knowledge of the present tectonic dynamics of the geological structural setting of the eastern part of the Adriatic region.

Over the years, Global Navigation Satellite Systems (GNSS) have been established in the geosciences as a tool that determines the positions of discrete points (stations) on the Earth’s surface, on global to local spatial scales in a very simple and economical manner. Coordinates obtained by space geodetic measurements ought to be processed, adjusted, and propagated in a given reference frame. As points on the Earth’s surface do not have a fixed position, but rather, are moving with associated velocities, it is inevitable to include those velocities in the coordinate transformation procedure. Station velocities can be obtained from kinematic models of tectonic plate motions. The development and realization of an all-in-one standalone desktop application is presented in this paper. The application unifies coordinate transformation between different realizations (reference frames) of the International Terrestrial Reference System (ITRS) and European Terrestrial Reference System 1989 (ETRS89) following European Reference Frame Technical Note (EUREF TN) recommendations with temporal shifts of discrete points on the Earth’s surface caused by plate tectonics by integrating no-net rotation (NNR) kinematic models of the Eurasian tectonic plate.

With strong technology improvement, especially GNSS, coordinate transformation has become an essential tool in everyday practice. For this reason, it is beneficial to have a good understanding of the mathematical process of coordinate transformation, as well as the method for calculating transformation parameters. The purpose of this article is to provide a detailed explanation of the coordinate transformation procedure and the calculation of transformation parameters for seven transformation models: 3-parameter, 5-parameter standard and abridged, 7-parameter, 8-parameter, 9-parameter, and 12-parameter. For each transformation model, a basic transformation equation, a procedure for calculating transformation parameters, inverse expression for reversible transformation, as well as characteristics of each model are provided. As an addition, for each model, a numerical example of calculating transformation parameters for the territory of the Republic of Croatia is provided. Additionally, for the example of the 7-parameter transformation, importance of reversible transformation, rotation convention, as well as the form of the rotation matrix used during transformation are demonstrated.

On 28 December 2020, the area of the city of Petrinja was hit by two strong earthquakes of magnitudes 5.0 and 4.7 on the Richter scale, and the following day, 29 December 2020, the same area was hit by an even stronger earthquake of magnitude 6.2. It was one of the two strongest instrumentally recorded earthquakes that hit the territory of the Republic of Croatia in the last hundred years, and the strongest earthquake in the Banovina area after the great earthquake in 1909. Increased seismic activity in this area is caused by two vertical strike–slip faults, Pokupski and Petrinjski. This article aims to determine the displacements of the Earth’s crust caused by seismic activity in this area using GNSS measurements and InSAR techniques and comparing their results. Our study showed that horizontal coseismic displacements of 20 cm and more were limited to a radius of 20 km from the epicenter, with a maximum displacement of around half a meter. Considering the original plate tectonic movements of the region and the time elapsed since the previous earthquake of similar magnitude, the geodynamic movements of the Dinarides area are in substantial part sudden displacements associated with earthquakes.

This study examines the influence of gravity on different height systems by integrating Global Navigation Satellite Systems (GNSS), leveling, and gravimetric measurements. Although the theoretical influence of gravity on height systems is well known, empirical studies that quantify these effects along steep terrain are rare—particularly within the Croatian reference systems. Geometric leveling, recognized for its precision in geodesy, was employed alongside gravimetric data to analyze the relationship between gravity variations and height differences. The research was conducted along Sljeme Road on Mt. Medvednica, Croatia, where altitude-dependent gravity effects were systematically investigated along an elevation profile with a height difference of about 650 m. GNSS measurements provided positional coordinates referenced to the Croatian Terrestrial Reference System 1996 (HTRS96) (EPSG:4888), while leveling and gravimetric data were analyzed within the Croatian Height Reference System 1971 (HVRS71) (EPSG:5610) and Croatian Gravimetric Reference System 2003 (HGRS03), respectively. The results demonstrate that differences between geometric and normal–orthometric heights become more pronounced at higher elevations but remain at the millimeter level. Notably, the impact of gravity is evident in normal and orthometric heights, with differences from geometric heights reaching up to 3.7 cm at the highest points. Additionally, a comparison between normal and orthometric heights reveals that at the beginning of the leveling line, the difference is around 4 mm. However, as the elevation increases, this difference grows, reaching over 1 cm at the end of the leveling line. The study also confirms the theoretical correlation between the geoid–quasigeoid height difference and terrain elevation, with increasing differences observed at higher altitudes. To examine the consistency of different height determination methods, two approaches were applied: one based on adjustment within the geopotential system, and the other involving direct adjustment in the desired height system, with specific height corrections applied. The results confirmed that the height differences between the two methods were 0, to the tenth of a millimeter, indicating that both methods provided identical results. These findings contribute to a deeper understanding of geodetic height systems and the role of gravity in height determination.

On 22 April 2022, a M_w 5.7 earthquake was generated near Stolac (Bosnia and Herzegovina). The mainshock was succeeded by several aftershocks, three of which were significant. Two M_b 4.3 earthquakes occurred on 23 April 2022, and a M_w 4.8 earthquake was generated on 24 April 2022. Available data from fault mechanism solutions revealed that the mainshock activated a reverse fault, while the aftershock generated a normal fault with a right-lateral component. The Balkan Peninsula stands as one of the most active geodynamic areas in Central and Eastern Europe due to its location within the collision zone between Eurasian and African tectonic plates and the Anatolian microplate. Recorded earthquakes in Bosnia and Herzegovina are related to the energy generated by the subduction of the African tectonic plate under Eurasia. Furthermore, the seismicity of Bosnia and Herzegovina, particularly its southern part, is profoundly influenced by the subduction of the Adriatic microplate under the Dinarides. The Dinarides are a mainly fold and thrust belt that extends from the Southern Alps in the northwest to the Hellenides in the southeast and make dominant the tectonic system of Bosnia and Herzegovina. In this study, two pairs of SAR images obtained from the Sentinel-1 satellite mission were utilized to generate satellite LOS surface displacements using the DInSAR method. Moreover, LOS displacements were decomposed into vertical and east–west horizontal components by combining ascending and descending satellite orbits. Ultimately, the InSAR results were analyzed and compared with the data obtained from the CROPOS CORS GNSS station in Metković (MET3).