Present investigation explores the possible reusability of synthetically contaminated wastewater containing crystal violet (CV) organic dye usingTectona grandissawdust (TGSD) waste as a very low-cost adsorbent. The adsorbent was characterized by proximate, SEM/EDX, FTIR, and XRD analyses. Batch adsorption studies were carried under changing conditions of contact time, the initial concentration of CV, pH, TGSD dose, TGSD particle size, and temperature. The experimental data were tested using Langmuir, Freundlich and Temkin isotherm models, and the data were best followed by Langmuir one. The kinetic results were examined in the light of different models and pseudo-second-order was obtained to be best obeyed. The values of ΔH° (28.642 kJ/mol), ΔG° (-10.776 to -7.080 kJ/mol) and ΔS° (121.8 J/K/mol) in the temperature range of 293–323 K suggested the overall process to be spontaneous, endothermic and associated with an increase in randomness. On the basis of experimental results and their analyses, it has been established that TGSD is one of the most effective adsorbents among those obtained from the domestic, agricultural and industrial wastes. Thus this adsorbent can be effectively utilized to make the impure wastewater reusable.
The low cost, eco-friendly and potential biomass, i.e. walnut (Juglans regia) shell powder was deployed for the removal of toxic methylene blue dye from contaminated water solution. The important characterization of the waste material was conducted by using several techniques, i.e. Scanning electron microscope, Fourier-transform infrared spectroscopy, Energy-dispersive X-ray spectroscopy, X-ray powder diffraction, Brunauer-Emmett-Teller surface area analysis, and Thermogravimetric analysis. The marked impact of various operating conditions, i.e. dose, concentration, time, pH and temperature on the adsorption process was investigated. Increasing pH resulted in an increase of percent dye adsorption, and the adsorption mechanism was occurred by electrostatic attraction between negative adsorbent surface and positive dye molecules. The equilibrium data suited with Langmuir isotherm model while the adsorption practice followed the pseudo-second-order kinetic model. Higher temperature reduced the adsorption of dye molecules. The adsorption process was spontaneous, exothermic and chemical. The critical statistical analysis of the experimental results was directed by forming the design of the experiment, which was further, optimized by ANOVA, 3D and perturbation plots. The error and predicted values of both the studied responses as derived from the statistical model showed the agreeable results. 0.1 N HCl was found to be effective in complete desorption. The results are very practical and prove the effectiveness of walnut shell powder in the usage of decolorization for methylene blue.
1 June 2019 in International Journal of Hydrogen Energy