Buildings and the construction industry are top contributors to climate change, and structures account for the largest share of the upfront greenhouse gas emissions. While a body of research exists into such emissions, a systematic comparison of multiple building structures in steel, concrete, and timber alternatives is missing. In this article, comparisons are made between mass and whole‐life embodied carbon (WLEC) emissions of building superstructures using identical frame configurations in steel, reinforced concrete, and engineered timber frames. These are assessed and compared for 127 different frame configurations, from 2 to 19 stories. Embodied carbon coefficients for each material and life cycle stage are represented by probability density functions to capture the uncertainty inherent in life cycle assessment. Normalized results show clear differences between the masses of the three structural typologies, with the concrete frame approximately five times the mass of the timber frame, and 50% higher than the steel frame. The WLEC emissions are mainly governed by the upfront emissions (cradle to practical completion), but subsequent emissions are still significant—particularly in the case of timber for which 36% of emissions, on average, occur post‐construction. Results for WLEC are more closely grouped than for masses, with median values for the timber frame, concrete frame, and steel frame of 119, 185, and 228 kgCO2e/m2, respectively. Despite the advantage for timber in this comparison, there is overlap between the results distributions, meaning that close attention to efficient design and procurement is essential. This article met the requirements for a gold–gold JIE data openness badge described in http://jie.click/badges.
1 July 2021 in Sustainable Production and Consumption
The built environment is one of the greatest contributors to carbon emissions, climate change, and to the unsustainable pressure on the natural environment and its ecosystems. The use of more timber in construction is one possible response, and an authoritative contribution to this growing movement comes from the UK’s Committee on Climate Change, which identifies a “substantial increase in the use of wood in the construction of buildings” as a top priority. However, a global encouragement of such a strategy raises some difficult questions. Given the urgency of effective solutions for low-carbon built environments, and the likely continued growth in demand for timber in construction, this article reviews its sustainability and identifies future challenges and unanswered questions. Existing evidence points indeed towards timber as the lower carbon option when modelled through life cycle assessment without having to draw on arguments around carbon storage. Issues however remain on the timing of carbon emissions, land allocation, and the environmental loads and benefits associated with the end-of-life options: analysis of environmental product declarations for engineered timber suggests that landfill might either be the best or the worst option from a climate change perspective, depending on assumptions.
9 March 2021 in Circular Economy and Sustainability
The avalanche of environmental challenges, from local to global and back, has prompted responses at all levels from personal to inter-governmental. The results of these responses have fallen in the range between useful and counterproductive, with many examples on each side, but the scale of the overall challenge continues to escalate. Moving towards a zero-carbon global economy through absolute reductions in fossil fuel usage is a sure way of mitigating climate change, and a range of environmental, social and economic benefits would follow. The case for a Circular Economy (CE), however, is less clear. Whilst some CE initiatives may lead to the decoupling of economic growth from resource extraction, this does not necessarily equate to reducing the rate of extraction. Thus, the contribution of CE to the achievement of environmental objectives globally cannot be taken for granted. In terms of social impact, the best that can be said is that CE might be neutral. Technologies that promote the ‘sharing economy’ for instance, often suggested as a crucial CE strategy, create opportunities for individual wealth accumulation, but are also a route to the gig economy and the casualisation of labour. CE is arguably a business imperative, but definitive evidence to support the idea of a circular economy that meets social and environmental goals needs development.
The construction and operation of buildings is a major contributor to global energy demand, greenhouse gases emissions, resource depletion, waste generation, and associated environmental effects, such as climate change, pollution and habitat destruction. Despite its wide relevance, research on building-related environmental effects often fails to achieve global visibility and attention, particularly in premiere interdisciplinary journals – thus representing a major gap in the research these journals offer. In this article we review and reflect on the factors that are likely causing this lack of visibility for such a prominent research topic and emphasise the need to reconcile the construction and operational phases into the physical unity of a building, to contribute to the global environmental discourse using a lifecycle-based approach. This article also aims to act as a call for action and to raise awareness of this important gap. The evidence contained in the article can support institutional policies to improve the status quo and provide a practical help to researchers in the field to bring their work to wide interdisciplinary audiences.
Timber and other biobased materials store carbon that has been captured from the atmosphere during photosynthesis and plant growth. The estimation of these biogenic carbon stocks in the harvested wood products (HWP) pool has received increasing attention since its inclusion in greenhouse gas reporting by the IPCC. It is of particular interest for long service life products such as timber in buildings; however, some aspects require further thought—in particular the handling of service lives as opposed to half-lives. The most commonly used model for calculating changes in the HWP pool uses first order decay based on half-lives. However other approaches are based on average service lives and estimates of residence times in the product pool, enabling different mathematical functions to be used. This paper considers the evolution of the two concepts and draws together data from a wide range of sources to consider service life estimation, which can be either related to design life or practical observations such as local environmental conditions, decay risk or consumer behaviour. As an increasing number of methods emerge for calculating HWP pool dynamics, it is timely to consider how these numerical inputs from disparate sources vary in their assumptions, calculation types, accuracy and results. Two groups are considered: half-lives for first order decay models, and service life and residence time population distributions within models based on other functions. A selection of examples are drawn from the literature to highlight emerging trends and discuss numerical constraints, data availability and areas for further study. The review indicated that issues exist with inconsistent use of nomenclature for half-life, average service life and peak flow from the pool. To ensure better sharing of data between studies, greater clarity in reporting function types used is required.