Managed aquifer recharge using surface or regenerated water plays an important role in the Barcelona Metropolitan Area in increasing storage volume to help operators cope with the runoff variability and unexpected changes in surface water quality that are aggravated by climate change. The specific aim of the research was to develop a non-invasive methodology to improve the planning and design of surface-type artificial recharge infrastructures. To this end, we propose an approach combining direct and indirect exploration techniques such as electrical resistivity tomography (ERT), frequency domain electromagnetics and data from double-ring infiltration tests, trial pits, research boreholes and piezometers. The ERT method has provided much more complete and representative information in a zone where the recharge project works below design infiltration rates. The geometry of the hydrogeological units and the aquifer-aquiclude contact are accurately defined through the models derived from the interpretation of ERT cross-sections in the alluvial aquifer setting. Consequently, prior to the construction of recharge basins, it is highly recommended to conduct the proposed approach in order to identify the highest permeability areas, which are, therefore, the most suitable for aquifer artificial recharge.

Water percolation through infiltration ponds is creating significant synergies for the broad adoption of water reuse as an additional non-conventional water supply. Despite the apparent simplicity of the soil aquifer treatment (SAT) approaches, the complexity of site-specific hydrogeological conditions and the processes occurring at various scales require an exhaustive understanding of the system’s response. The non-saturated zone and underlying aquifers cannot be considered as a black box, nor accept its characterization from few boreholes not well distributed over the area to be investigated. Electrical resistivity tomography (ERT) is a non-invasive technology, highly responsive to geological heterogeneities that has demonstrated useful to provide the detailed subsurface information required for groundwater modeling. The relationships between the electrical resistivity of the alluvial sediments and the bedrock and the difference in salinity of groundwater highlight the potential of geophysical methods over other more costly subsurface exploration techniques. The results of our research show that ERT coupled with implicit modeling tools provides information that can significantly help to identify aquifer geometry and characterize the saltwater intrusion of shallow alluvial aquifers. The proposed approaches could improve the reliability of groundwater models and the commitment of stakeholders to the benefits of SAT procedures.

Geophysical surveys are a noninvasive reliable tool to improve geological models without requiring extensive in situ borehole campaigns. The usage of seismic refraction tomography (SRT), electrical resistivity tomography (ERT) and borehole data for calibrating is very appropriate to define landslide body geometries; however, it is still only used occasionally. We present here the case of a Spanish Pyrenees slow-moving landslide, where ERT, SRT and lithological log data were integrated to obtain a geological three-dimensional model. The high contrasts of P-wave velocity and electrical resistivity values of the upper materials (colluvial debris and clayey siltstone) provided accurate information on the geometry of the materials involved in the landslide body, as well as the sliding surface. Geophysical prospecting allowed us to identify the critical sliding surface over a large area and at a reduced cost and, therefore, gives the geophysical method an advantage over borehole data. The three-dimensional model was used to carry out stability analyses of a landslide in 2D and 3D, which, coherently with previous studies, reveal that the lower part is more unstable than the upper units.