The artificial-caved rock composited backfilling approach can effectively restrain the dynamic phenomena in the coal seam and the associated roof and floor during mining operations, and can also improve the stability of the system of support and surrounding rock. In this study, based on the analysis of influencing factors affecting the surrounding rock movement and deformation of the composited backfilling longwall face in a steeply dipping coal seam, the roof mechanical model is developed, and the deflection differential equation is derived, to obtain the roof damage structure and the location of the roof fracture for the area without backfilling. The migration law of the roof under different inclination angles, mining depths, working face lengths, and backfilling ratios are analyzed. Finally, mine pressure is detected in the tested working face. Results show that the roof deflection, bending moment, and rotation drop with the increase of the inclination angle and backfilling ratio, whereas these parameters increase with greater mining depth and working face length. The roof failure location moves toward the upper area of the working face as the inclination angle and working face length increases, while it moves toward the center of the non-backfilling area with greater mining depth and backfilling ratio. Results from the proposed mechanical model agree well with the field test results, demonstrating the validity of the model, which can provide theoretical basis for a safe and efficient mining operation in steeply dipping coal seams.
Paste composite filling mining (PCFM) is one of the effective ways to achieve water-preserved mining (preservation of the waterproof strata). To investigate the laws of fracture propagation of the overlying strata in the PCFM stope, a kinematic model of overlying strata in the PCFM was established, which identified the major determinants to the development of overlying strata fractures. Taking the 112,201 working face of the test mine as the research background, the physical similar simulation, numerical computation, and theoretical analysis were combined to analyze the development characteristics of overlying strata fractures in the PCFM under the reaction between many factors (mining height, filling ratio, burial depth). The results show that the larger the mining height of the working face, the larger the development degree of overlying strata fractures. When the mining height is smaller, fractures are mostly distributed on both sides of the coal wall; when the mining height is larger, overlying strata fractures are mostly distributed on both sides of the coal wall and the upper part of overlying strata. The larger the paste filling ratio of the working face, the smaller the development degree of overlying strata fractures. Overlying strata fractures are mostly distributed in overlying strata on both sides of the coal wall. When the filling ratio of the working face increases, it is possible to effectively control the development of overlying strata fractures. The shallower the burial depth of the working face is, the faster the fractures are developed. With the increase of the burial depth, the development of overlying strata fractures is reduced, and overlying strata fractures will finally tend to be a stable value. The research results provide an important theoretical foundation for the application of the localized paste filling mining technique in the water-preserved mining, and also complement the theories of filling mining.
Overlying-separation layer grouting technology refers to manufacturing grouting by mixing water, fly ash and other materials on ground in proportion, and then injecting into stratum of development zone on separation layer with high-pressure grouting pump to fill the separation layer space for mitigating surface subsidence in coal mine. In this study, the overlying-separation layer development and grouting subsidence mitigation mechanism were investigated by analyzing filling, supporting, cementation and expansion of grouting material. A calculation method for grouting subsidence mitigation was proposed based on the analysis of overlying rock and surface movement without grouting, deflection of grouting control layer and surface subsidence with grouting. The factors influencing grouting subsidence mitigation effects were analyzed to optimize overlying-separation layer grouting parameters. An evaluation method for grouting subsidence mitigation effects was proposed. The analysis results of examples indicated that subsidence coefficient of theoretical calculation is generally matched with that of numerical modeling, and the accurate evaluation of grouting subsidence mitigation effects by specific calculation can be simplified as measuring with the actual maximum surface subsidence values without and with applying grouting technology.
The gangue filling mining method is used to reduce the occurrence of dynamic disasters on the roof of a steeply dipping coal seam (SDCS) effectively and improve the stability of the overburden structure. To comprehensively study the movement law of the overburden under different filling quantities, the 3221 working face of the Lvshuidong coal mine was taken as the research site. The vertical displacement, vertical stress, and plastic zone of the overburden under different filling quantities were analyzed by using FLAC3D numerical simulation and physical similarity simulations. The results show that the maximum stress in the stress concentration zone decreased with the increase of filling size. The vertical stress range of the overburden and floor in the filling zone increased significantly. The affected zones of the vertical displacement of the roof and floor and the vertical displacement of the overburden were reduced to varying degrees. The overall plastic zone was shrinking. The movement of overburden was well-controlled as the proportion of the fillings increased. The results of this study can provide an important reference for the stability control of the roof of SDCS filling mining.
29 May 2015 in The Open Construction & Building Technology Journal
Paste filling is an important research direction of coalmine “green mining” which can dispose coalmines solid waste and achieve environmental protection. The mechanical properties such as compressive strength, workability, ultimate tension value, shear strength and splitting strength of paste, in which the fly ash was partially replaced by limestone powder, was studied. Adiabatic temperature rise, setting time, shear strength, permeability, frost resistance and dry shrinkage of different substitution rate were investigated and the results were compared with traditional paste. The test results showed that the influence of limestone powder on workability, permeability and frost resistance performance of paste was slight, the setting time of paste were shortened, adiabatic temperature rise and mechanics performance of paste were decreased, dry shrinkage value was increased with limestone powder content increasing.
3 October 2016 in The Open Construction & Building Technology Journal