Interest in layered two-dimensional (2D) materials has been escalating rapidly over the past few decades due to their promising optoelectronic and photonic properties emerging from their atomically thin 2D structural confinements. When these 2D materials are further confined in lateral dimensions toward zero-dimensional (0D) structures, 2D nanoparticles and quantum dots with new properties can be formed. Here, we report a nonequilibrium gas-phase synthesis method for the stoichiometric formation of gallium selenide (GaSe) nanoparticles ensembles that can potentially serve as quantum dots. We show that the laser ablation of a target in an argon background gas condenses the laser-generated plume, resulting in the formation of metastable nanoparticles in the gas phase. The deposition of these nanoparticles onto the substrate results in the formation of nanoparticle ensembles, which are then post-processed to crystallize or sinter the nanoparticles. The effects of background gas pressures, in addition to crystallization/sintering temperatures, are systematically studied. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), photoluminescence (PL) spectroscopy, and time-correlated single-photon counting (TCSPC) measurements are used to study the correlations between growth parameters, morphology, and optical properties of the fabricated 2D nanoparticle ensembles.
1 January 2022 in International Symposium on Microelectronics
Current printed electronics manufacturing techniques, including inkjet and aerosol jet printing, use ink to produce electronics devices. The inks are formulated with pigments, additives, and solvents, which make the inks impure. Also, small changes in the composition of the inks will result in different chemical and physical properties, which might affect the printing process as well as the final performance of the device. In addition, the ink formulations are rather complex, with a limited source of functional materials for printing functional devices. Annealing during printing or post-processing for solvent removal is another challenge of these techniques, which limit printing on low temperature and biodegradable substrates. Herein, we present a novel additive nanomanufacturing (ANM) technique compatible with a wide range of substrates for dry printing and patterning of a variety of materials, including on different rigid and flexible substrates. Bending tests show good mechanical stability and electrical conductivity, confirming the potential of ANM technique for printing different materials for flexible hybrid electronics and sensors.