As an alternative to standard silicon biofunctionalization protocol based on alkoxysilanes that bind to SiO2 on oxidized silicon substrates, several protocols to form bifunctional interlayers that directly bind to the silicon surface via a strong SiC bond have been developed during the last decades. These interlayers are more stable, and the lack of an insulating layer between the substrate and the interlayer reduces electric noise in biosensor devices. SiC monolayers are not yet regularly applied as the protocols are more complex and generally require an inert gas atmosphere. However, a variety of applications and new methods to form bifunctional SiC interlayers are recently developed. Here, the role these innovative protocols and interlayers play in biofunctionalization of silicon surfaces is reviewed and their applications in electrochemical, microelectromechanical, and optical biosensing are reported. From the analysis of the current situation, it can be concluded that the advantageous properties offered with this approach in many cases more than outweigh the additional processes to form SiC bonded interlayers and the approach is predicted to expand the applications of future silicon‐based biosensors.
The performance of receptor-based biosensors is often limited by either diffusion of the analyte causing unreasonable long assay times or a lack of specificity limiting the sensitivity due to the noise of nonspecific binding. Alternating current (AC) electrokinetics and its effect on biosensing is an increasing field of research dedicated to address this issue and can improve mass transfer of the analyte by electrothermal effects, electroosmosis, or dielectrophoresis (DEP). Accordingly, several works have shown improved sensitivity and lowered assay times by order of magnitude thanks to the improved mass transfer with these techniques. To realize high sensitivity in real samples with realistic sample matrix avoiding nonspecific binding is critical and the improved mass transfer should ideally be specific to the target analyte. In this paper we cover recent approaches to combine biosensors with DEP, which is the AC kinetic approach with the highest selectivity. We conclude that while associated with many challenges, for several applications the approach could be beneficial, especially if more work is dedicated to minimizing nonspecific bindings, for which DEP offers interesting perspectives.
The combination of extreme miniaturization with a high sensitivity and the potential to be integrated in an array form on a chip has made silicon-based photonic microring resonators a very attractive research topic. As biosensors are approaching the nanoscale, analyte mass transfer and bonding kinetics have been ascribed as crucial factors that limit their performance. One solution may be a system that applies dielectrophoretic forces, in addition to microfluidics, to overcome the diffusion limits of conventional biosensors. Dielectrophoresis, which involves the migration of polarized dielectric particles in a non-uniform alternating electric field, has previously been successfully applied to achieve a 1000-fold improved detection efficiency in nanopore sensing and may significantly increase the sensitivity in microring resonator biosensing. In the current work, we designed microring resonators with integrated electrodes next to the sensor surface that may be used to explore the effect of dielectrophoresis. The chip design, including two different electrode configurations, electric field gradient simulations, and the fabrication process flow of a dielectrohoresis-enhanced microring resonator-based sensor, is presented in this paper. Finite element method (FEM) simulations calculated for both electrode configurations revealed ∇E2 values above 1017 V2m−3 around the sensing areas. This is comparable to electric field gradients previously reported for successful interactions with larger molecules, such as proteins and antibodies.
Silicon‐on‐insulator (SOI) based photonic sensors, particularly those utilizing Photonic Integrated Circuit (PIC) technology, have emerged as promising candidates for miniaturized bioanalytical devices. These sensors offer real‐time responses, occupy minimal space, possess high sensitivity, and facilitate label‐free detection. However, like many biosensors, they face challenges when detecting analytes at exceedingly low concentrations due to limitations in mass transport. An intriguing method to enhance mass transfer in microfluidic biosensors is AC electrokinetics. Proof‐of‐concept experiments have demonstrated significant enhancements in limit of detection (LOD) and response times. AC electrokinetics, compatible with silicon photonic sensors, offers techniques such as electroosmosis, electrothermal effects, and dielectrophoresis to modify fluid flow and manipulate particle trajections. This article delves into various approaches for integrating AC electrokinetics into silicon photonic biosensors, shedding light on both its advantages and limitations.