Generation of high-quality waves is essential when making numerical or physically model tests. When using a wavemaker theory outside the validity area, spurious waves are generated. In order to investigate the validity of different wave generation methods, new model test results are presented where linear and nonlinear wave generation theories are tested on regular and irregular waves. A simple modification to the second-order wavemaker theory is presented, which significantly reduces the generation of spurious waves when used outside its range of applicability. For highly nonlinear regular waves, only the ad-hoc unified wave generation based on stream function wave theory was found acceptable. For irregular waves, similar conclusions are drawn, but the modified second-order wavemaker method is more relevant. This is because the ad-hoc unified generation method for irregular waves requires the wave kinematics to be calculated by a numerical model, which might be quite time-consuming. Finally, a table is presented with the range of applicability for each wavemaker method for regular and irregular waves.
1 January 2019 in Journal of Waterway, Port, Coastal, and Ocean Engineering
Most existing methods for separation of two-dimensional (long-crested) waves into incident and reflected components are based on linear wave theory. Recently, a new method for separation of incident and reflected nonlinear regular waves was presented including separation of bound and free superharmonics. The present paper extends this method to irregular waves. Irregular waves are much more complicated to separate because bound components are caused by interaction of many different frequencies, thus, some simplifications are needed. The presented nonlinear separation method is based on narrowband approximation. Second-order wave theory is used to demonstrate that errors for more broad-banded spectra are acceptable. Moreover, for highly nonlinear waves, amplitude dispersion occurs and is included by a simplified amplitude dispersion correction factor. Both assumptions are evaluated based on numerical and physical model data. The overall conclusion is that existing reflection separation methods are reliable only for linear and mildly nonlinear nonbreaking irregular waves, whereas the present method seems reliable for the entire interval from linear to highly nonlinear nonbreaking irregular waves. The present method is shown to be an efficient and practical approximation for an unsolved theoretical problem in the analysis of waves in physical models.
Numerical tests are performed to investigate wave transformations of nonlinear nonbreaking regular waves with normal incidence to the shore in decreasing and increasing water depth. The wave height transformation (shoaling) of nonlinear waves can, just as for linear waves, be described by conservation of the mechanical energy flux. The numerical tests show that the mechanical energy flux for nonlinear waves on sloping foreshores is well described by stream function wave theory for horizontal foreshore. Thus, this theory can be used to estimate the shoaled wave height. Furthermore, the amplitude and the celerity of the wave components of nonlinear waves on mildly sloping foreshores can also be predicted with the stream function wave theory. The tests also show that waves propagating to deeper water (de-shoaling) on a very gentle foreshore with a slope of cot(β) = 1200 can be described in the same way as shoaling waves. For de-shoaling on steeper foreshores, free waves are released leading to waves that are not of constant form and thus cannot be modelled by the proposed approach.
The Van der Meer formulae for quarry rock armor stability are commonly used in breakwater design. The formulae describe the stability as a function of the wave characteristics, number of waves, front slope angle and rock material properties. The latter includes a so-called notional permeability factor characterizing the permeability of the structure. Based on armor stability model tests with three armor layer compositions, Van der Meer determined three values of the notional permeability. Based on numerical model results he added for a typical layer composition one more value. Based on physical model tests, the present paper provides notional permeability factors for seven layer compositions of which two correspond to the compositions tested by Van der Meer. The results of these two layer compositions are within the scatter of the results by Van der Meer. To help determination of the notional permeability for non-tested layer compositions, a simple empirical formula is presented.
Methods for the separation of long-crested linear waves into incident and reflected waves have existed for more than 40 years. The present paper presents a new method for the separation of nonlinear bichromatic long-crested waves into incident and reflected components, as well as into free and bound components. The new method is an extension of a recently proposed method for the separation of nonlinear regular waves. The new methods include both bound and free higher harmonics, which is important for nonlinear waves. The applied separation method covers interactions to the third order, but can easily be extended to a higher orders. Synthetic tests, as well as physical model tests, showed that the method accurately predict the bound amplitudes and incident and reflected surface elevations of nonlinear bichromatic waves. The new method is important in order to be able to describe the detailed characteristics of nonlinear bichromatic waves and their reflection.
Accurate prediction of wave transformation is key in the design of coastal and nearshore structures which typically depends on numerical models. Turbulent and rotational effects call for the use of Computational Fluid Dynamics (CFD) solvers of which a large range of formulations including free surface treatments exists. Physical wave flume tests of wave propagation over a submerged bar with various levels of nonlinearity, regularity, and wave-breaking, dedicated to numerical model benchmarking or validation, were carried out in the Ocean and Coastal Engineering Laboratory of Aalborg University. Three fundamentally different CFD models each widespread within their category are benchmarked against the experimental data. The CFD models are based on (i) the Volume of Fluid (VoF) based interFoam solver of OpenFOAM, (ii) the sigma-transformation solver of MIKE 3 Waves Model FM, and (iii) the weakly compressible delta-SPH solver of DualSPHysics. Accuracy of the numerical models is assessed from surface elevation time series, evaluation metrics (averaged errors on surface elevations, amplitudes, phases, and wave set-up), and spectral analyses to calculate the amplitude and phase contents of primary and higher-order components along the wave flume. Applicability is assessed from computational costs and ease-of-use factors such as the effort to configure the numerical models and achieve convergence. In general, the numerical models have high correlation to the physical tests and are as such suitable to model complex wave transformation with an accuracy sufficient for most coastal engineering applications. The VoF model performs more accurately under the turbulent conditions of breaking waves, increasing its relative accuracy in the prediction of downwave surface elevation. The sigma transformation model has simulation times one to two orders of magnitude lower than those of the VoF and SPH models.