Shih-Nan Hsiao

Dr. Shih-Nan Hsiao

Center for Low-Temperature Plasma Sciences, Nagoya University, Nagoya 464-8603, Japan
orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 June 2024 in Small Methods
Verified
Journal Article
Open access
Shih-Nan HsiaoShih-Nan Hsiao
Shih-Nan Hsiao
MSMakoto Sekine
Makoto Sekine
NBNikolay Britun
Nikolay Britun
MMMichael K. T. Mo
Michael K. T. Mo
YIYusuke Imai
Yusuke Imai
MHMasaru Hori
Masaru Hori
Manufacturing semiconductor devices requires advanced patterning technologies, including reactive ion etching (RIE) based on the synergistic interactions between ions and etch gas. However, these interactions weaken as devices continuously scale down to sub‐nanoscale, primarily attributed to the diminished transport of radicals and ions into the small features. This leads to a significant decrease in etch rate (ER). Here, a novel synergistic interaction involving ions, surface‐adsorbed chemistries, and materials at cryogenic temperatures is found to exhibit a significant increase in the ER of SiO 2 using CF 4 /H 2 plasmas. The ER increases twofold when plasma with H 2 /(CF 4 + H 2 ) = 33% is used and the substrate temperature is lowered from 20 to −60 °C. The adsorption of HF and H 2 O on the SiO 2 surface at cryogenic temperatures is confirmed using in situ Fourier transform infrared spectroscopy. The synergistic interactions of the surface‐adsorbed HF/H 2 O as etching catalysts and plasma species result in the ER enhancement. Therefore, a mechanism called “pseudo‐wet plasma etching” is proposed to explain the cryogenic etching process. This synergy demonstrates that the enhanced etch process is determined by the surface interactions between ions, surface‐adsorbed chemistry, and the material being etched, rather than interactions between ion and gas phase, as observed in the conventional RIE.

25 June 2012 in Applied Physics Letters
Verified
Journal Article
Closed access
Shih-Nan HsiaoShih-Nan Hsiao
Shih-Nan Hsiao
SLS. H. Liu
S. H. Liu
SCS. K. Chen
S. K. Chen
TCT. S. Chin
T. S. Chin
HLH. Y. Lee
H. Y. Lee
Roles of rapid thermal annealing (RTA) on the evolution of crystallographic anisotropy of single-layered FePt films have been characterized. We observed a huge biaxial tensile stress of 2.18 GPa induced with increasing heating rate from 0.5 to 40 K/s. The result is a transition of orientation from (111) to perfect (001) texture. The later then degrades at heating rates ≥80 K/s due to morphological variation. The advantages of RTA are to induce tensile stress by densification reaction within a very short time and to simultaneously impede thickness-dependent dynamic stress relaxation.


20 November 2023 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
Shih-Nan HsiaoShih-Nan Hsiao
Shih-Nan Hsiao
MSMakoto Sekine
Makoto Sekine
KIKenji Ishikawa
Kenji Ishikawa
YIYuki Iijima
Yuki Iijima
YOYoshinobu Ohya
Yoshinobu Ohya
Masaru  HoriMasaru Hori
Masaru Hori
The surface conductivity influences the etched pattern profiles in the plasma process. In the dielectric film etching, it is vital to reduce the charging build-up, which bends the trajectory of incoming ions for highly anisotropic etching. A significant increase in surface electric conductivity of SiO2 films was observed when exposed to down-flow plasmas containing hydrogen fluoride (HF) at cryogenic temperature (−60 °C). This phenomenon can be attributed to two factors: (i) the absorption of HF and/or its compounds and (ii) the presence of H2O, which is likely originating from the etching by-product of SiO2 and/or within the reactor. Comparing the surface electric resistance of the samples treated with HF plasmas to that of CF4/H2 and C4F8/H2 plasmas, we found that HF plasma treatment enables to be approximately three and six orders of magnitude lower. By using in situ x-ray photoemission spectroscopy, it was revealed that the presence of HF and/or its compounds and H2O were absorbed on the sample surface at −60 °C. These results strongly suggest that the cryogenic plasma etching with HF-contained gases can be used to alleviate the charge build-up issues.

12 December 2023 in ACS Applied Electronic Materials
Verified
Journal Article
Closed access
Shih-Nan HsiaoShih-Nan Hsiao
Shih-Nan Hsiao
Nikolay V. BritunNikolay V. Britun
Nikolay V. Britun
TNThi-Thuy-Nga Nguyen
Thi-Thuy-Nga Nguyen
MSMakoto Sekine
Makoto Sekine
MHMasaru Hori
Masaru Hori

13 July 2023 in ACS Applied Materials & Interfaces
Verified
Journal Article
Closed access
Shih-Nan HsiaoShih-Nan Hsiao
Shih-Nan Hsiao
MSMakoto Sekine
Makoto Sekine
MHMasaru Hori
Masaru Hori