This paper presents the study and the realization at IETR of a high data rate 60 GHz wireless communications system. The system uses a simple single carrier architecture. The receiver architecture is based on a differential demodulation which minimizes the intersymbol interference (ISI) effect and a signal processing unit composed of a joint frame and byte synchronization block and a conventional RS (255, 239) decoder. The byte synchronization technique provides a high preamble detection probability and a very small value of the false detection probability. First measurement results show a good communication link quality in line of sight environments with directional antennas.
New millimeter-wave wireless communication systems can be strongly impacted by the blockage introduced by the human body. At 60 GHz, the coverage of these systems is relatively limited due to high propagation losses. Thus, beamforming allows to find a reflective path to replace the blocked one. In this work, the study focuses on the impact of a human blocker in a meeting room, to evaluate the blocking losses introduced by the human body at 60 GHz. The results obtained in terms of path loss and channel impulse response show that the attenuation by the human body is between 24 and 26 dB. Moreover, the results show that the use of beamforming allows to exploit the reflected paths to replace the direct link that can be blocked by the human body.
This paper presents the design and the realization of a 60 GHz wireless Gigabit Ethernet communication system. A differential encoded binary phase shift keying modulation (DBPSK) and differential demodulation schemes are adopted for the IF blocks. The Gigabit Ethernet interface allows a high speed transfer of multimedia files via a 60 GHz wireless link. First measurement results are shown for 875 Mbps data rate.
31 March 2013 in AEU - International Journal of Electronics and Communications