Tailoring the surface properties of 2D materials, such as transition metal dichalcogenides (TMDCs), at the nanoscale is becoming essential in the fabrication of various 2D material-based nanoelectronic devices. Due to the chemical inertness of their basal plane, the surface modification of 2D TMDCs is limited to their defective sites, often requiring special treatments, such as the conversion of the TMDC from its semiconducting into its metallic phase. In this work, we show that the basal plane of a semiconducting 2D TMDC, molybdenum disulfide (MoS2) can be modified electrochemically by electrografting of aryl-diazonium salt. To demonstrate the advantages of this method at the nanoscale, we perform electrografting of 3,5-bis(trifluoromethyl)benzenediazonium tetrafluoroborate on predefined MoS2 nanoribbons by addressing them individually via a different electrode. The ability to selectively address individually contacted 2D layers opens the possibility for specific surface modification of neighboring 2D nanostructures by different functional groups. This method could be extended to other aryl-diazonium compounds, and other 2D semiconducting materials.
This study examined the effects of pulsed electric field (PEF) treatment on enzymes, non-starch polysaccharides, and bread-making potential of oat and barley flour. Enzyme activity, microstructure, β-glucan extractability, molecular weight (Mw) and structure of non-starch polysaccharides, dough rheology, and flat bread properties were determined. An exponential decay model explained better the residual activity of oat β-glucanase across electric field intensity than barley β-glucanase. PEF treatment of flour at 12 kV/cm for 162 ms significantly reduced β-glucanase activity (40.2–76.5%) while increasing the concentration of total β-glucans (33.5%) and water-extractable arabinoxylans (36–41%). Mw of linear β-d-glucans decreased (9%) while Mw of branched arabinoxylans increased (6–33%). Scanning electron microscopy showed changes in microstructure of barley proteins. Blending wheat flour (70%) with oat or barley flour (30% weight) after PEF treatment enhanced gluten aggregation energy (29–19%) and breakdown viscosity (18–43%) of dough, as well as increased β-glucan content (21–32%) but reduced specific volume (11–24%). The findings of this study provide a comprehensive insight into the PEF’s potential for retarding enzymatic reactions and preserving integrity of cereal non-starch polysaccharides.
Pretreatment of grape pomace seeds with a pulsed electric field (PEF) was applied to improve the extraction yield of cold-pressed grape seed oil. The effects of different PEF conditions, electric field intensities (12.5, 14.0 and 15.6 kV/cm), and durations (15 and 30 min) on the oil chemical composition were also studied. All PEF pretreatments significantly increased the oil yield, flow rate and concentration of total sterols (p < 0.05). In addition, similar trends were observed for total tocochromanols and phenolic compounds, except for PEF pretreatment under the mildest conditions (12.5 kV/cm, 15 min) (p < 0.05). Notably, the application of 15.6 kV/cm for 30 min resulted in the highest relative increase in oil yield and flow rate (29.6% and 56.5%, respectively) and in the concentrations of total tocochromanols, nonflavonoids, and flavonoids (22.1%, 60.2% and 81.5%, respectively). In addition, the highest relative increase in the concentration of total sterols (25.4%) was achieved by applying 12.5 kV/cm for 30 min. The fatty acid composition of the grape seed oil remained largely unaffected by the PEF pretreatments. These results show that PEF pretreatment effectively improves both the yield and the bioactive properties of cold-pressed grape seed oil.