Soil-liquefaction-related hazards can damage structures or lead to an extensive loss of life and property. Therefore, the stability and safety of structures against soil liquefaction are essential for evaluation in earthquake design. In practice, the simplified liquefaction analysis procedure associated with numerical simulation analysis is the most used approach for evaluating the behavior of structures or the effectiveness of mitigation plans. First, the occurrence of soil liquefaction is evaluated using the simplified procedure. If soil liquefaction occurs, the resulting structural damage or the following mitigation plan is evaluated using the numerical simulation analysis. Rational and comparable evaluation results between the simplified liquefaction analysis procedure and the numerical simulation analysis are achieved by ensuring that the liquefaction constitutive model used in the numerical simulation has a consistent liquefaction resistance with the simplified liquefaction analysis procedure. In this study, two frequently used liquefaction constitutive models (Finn model and UBCSAND model) were calibrated by fitting the liquefaction triggering curves of most used simplified liquefaction analysis procedures (NCEER, HBF, JRA96, and T-Y procedures) in Taiwan via FLAC program. In addition, the responses of two calibrated models were compared and discussed to provide guidelines for selecting an appropriate liquefaction constitutive model in future projects.

This paper presents a field monitoring study with emphasis on the design and construction of a subsurface drainage system and evaluation of its stabilization efficiency on the slope of You-Ye-Lin landslide using a three-dimensional finite element method program (Plaxis 3D) for the groundwater flow and slope stability analyses. The subsurface drainage system consists of two 4-m diameter drainage wells with multi-level horizontal drains and was installed to draw down the groundwater level and stabilize the unstable slope of the landslide. Results demonstrate that the subsurface drainage system is functional and capable of accelerating the drainage of the infiltrated rainwater during torrential rainfalls during the typhoon season. The large groundwater drawdown by the subsurface drainage system protects the slopes from further deterioration and maintains the slope stability at an acceptable and satisfactory level.

The uplift of underground structures induced by soil liquefaction can damage underground structure systems. Numerical simulations have shown that uplift is positively correlated with the energy of horizontal input motion. However, the effects of vertical input motion on uplift have not been studied comprehensively in the past. Previous studies on the vertical motion concluded that the effects of vertical motion on uplift depend on the overall characteristics of earthquake motion. These motion characteristics have only been studied separately in previous studies. A comprehensive study to explore the interactions and overall effects of these characteristics on the uplift of underground structures is essential. In this study, the FLAC program with the PM4Sand model was used as a numerical tool to explore the effects of vertical input motion on the uplift of underground structures. The numerical model was calibrated using centrifuge test results, and 48 earthquake motions were selected as input motions to study the effects of the overall characteristics of earthquake motions on the uplift of underground structures. The simulation results show that the frequency content characteristics of horizontal and vertical motion are the major factors affecting the uplift magnitude and the responses of liquefiable soils. However, most simulation cases show that the inclusion of vertical motion causes a 10% difference in the tunnel uplift, compared to cases without vertical motion.

The 2016 Meinong Earthquake hit southern Taiwan and many shallow foundation structures were damaged due to soil liquefaction. In response, the government initiated an investigation project to construct liquefaction potential maps for metropolitans in Taiwan. These maps were used for the preliminary safety assessment of infrastructures or buildings. However, the constructed liquefaction potential map used the pseudo‐probabilistic approach, which has inconsistent return period. To solve the inconsistency, the probabilistic liquefaction hazard analysis (PLHA) was introduced. However, due to its complicated calculation procedure, PLHA is not easy and convenient for engineers to use without a specialized program, such as in Taiwan. Therefore, PLHA is not a popular liquefaction evaluation procedure in practice. This study presents a simple PLHA program, HAZ45PL Module, customized for Taiwan. Sites in Tainan City and Yuanlin City are evaluated using the HAZ45PL Module to obtain the hazard curve and to construct the liquefaction probability map. The liquefaction probability map provides probabilities of different liquefaction potential levels for engineers or owners to assess the performance of an infrastructure or to design a mitigation plan.