Hans Wernher van de Venn

Prof. Dr. Hans Wernher van de Venn

Zurich University of Applied Sciences, Institute of Food and Beverage Innovation, 8820 Waedenswil, Switzerland
+1
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 November 2020 in Sensors
Verified
Journal Article
Open access
PDF file
Fatemeh Mohammadi AminFatemeh Mohammadi Amin
Fatemeh Mohammadi Amin
Maryam RezayatiMaryam Rezayati
Maryam Rezayati
Hans Wernher van de VennHans Wernher van de Venn
Hans Wernher van de Venn
HKHossein Karimpour
Hossein Karimpour
Digital-enabled manufacturing systems require a high level of automation for fast and low-cost production but should also present flexibility and adaptiveness to varying and dynamic conditions in their environment, including the presence of human beings; however, this presence of workers in the shared workspace with robots decreases the productivity, as the robot is not aware about the human position and intention, which leads to concerns about human safety. This issue is addressed in this work by designing a reliable safety monitoring system for collaborative robots (cobots). The main idea here is to significantly enhance safety using a combination of recognition of human actions using visual perception and at the same time interpreting physical human–robot contact by tactile perception. Two datasets containing contact and vision data are collected by using different volunteers. The action recognition system classifies human actions using the skeleton representation of the latter when entering the shared workspace and the contact detection system distinguishes between intentional and incidental interactions if physical contact between human and cobot takes place. Two different deep learning networks are used for human action recognition and contact detection, which in combination, are expected to lead to the enhancement of human safety and an increase in the level of cobot perception about human intentions. The results show a promising path for future AI-driven solutions in safe and productive human–robot collaboration (HRC) in industrial automation.

21 October 2021 in Sensors
Verified
Journal Article
Open access
PDF file
KFKiavash Fathi
Kiavash Fathi
Hans Wernher van de VennHans Wernher van de Venn
Hans Wernher van de Venn
MHMarcel Honegger
Marcel Honegger
Performing predictive maintenance (PdM) is challenging for many reasons. Dealing with large datasets which may not contain run-to-failure data (R2F) complicates PdM even more. When no R2F data are available, identifying condition indicators (CIs), estimating the health index (HI), and thereafter, calculating a degradation model for predicting the remaining useful lifetime (RUL) are merely impossible using supervised learning. In this paper, a 3 DoF delta robot used for pick and place task is studied. In the proposed method, autoencoders (AEs) are used to predict when maintenance is required based on the signal sequence distribution and anomaly detection, which is vital when no R2F data are available. Due to the sequential nature of the data, nonlinearity of the system, and correlations between parameter time-series, convolutional layers are used for feature extraction. Thereafter, a sigmoid function is used to predict the probability of having an anomaly given CIs acquired from AEs. This function can be manually tuned given the sensitivity of the system or optimized by solving a minimax problem. Moreover, the proposed architecture can be used for fault localization for the specified system. Additionally, the proposed method can calculate RUL using Gaussian process (GP), as a degradation model, given HI values as its input.

15 December 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MKMohammadreza kaji
Mohammadreza kaji
JPJamshid Parvizian
Jamshid Parvizian
Hans Wernher van de VennHans Wernher van de Venn
Hans Wernher van de Venn
Estimating the remaining useful life (RUL) of components is a crucial task to enhance reliability, safety, productivity, and to reduce maintenance cost. In general, predicting the RUL of a component includes constructing a health indicator (HI) to infer the current condition of the component, and modelling the degradation process in order to estimate the future behavior. Although many signal processing and data-driven methods have been proposed to construct the HI, most of the existing methods are based on manual feature extraction techniques and require the prior knowledge of experts, or rely on a large amount of failure data. Therefore, in this study, a new data-driven method based on the convolutional autoencoder (CAE) is presented to construct the HI. For this purpose, the continuous wavelet transform (CWT) technique was used to convert the raw acquired vibrational signals into a two-dimensional image; then, the CAE model was trained by the healthy operation dataset. Finally, the Mahalanobis distance (MD) between the healthy and failure stages was measured as the HI. The proposed method was tested on a benchmark bearing dataset and compared with several other traditional HI construction models. Experimental results indicate that the constructed HI exhibited a monotonically increasing degradation trend and had good performance in terms of detecting incipient faults.

5 September 2020 in Preprints.org
Verified
Preprint
Open access
FAFatemeh Mohammadi Amin
Fatemeh Mohammadi Amin
MRMaryam Rezayati
Maryam Rezayati
Hans Wernher van de VennHans Wernher van de Venn
Hans Wernher van de Venn
HKHossein Karimpour
Hossein Karimpour
Digital enabled manufacturing systems require high level of automation for fast and low-cost production but should also present flexibility and adaptiveness to varying and dynamic conditions in their environment, including the presence of human beings. This issue is addressed in this work by implementing a reliable system for real-time safe human-robot collaboration based upon the combination of human action and contact type detection systems. Two datasets containing contact and vision data are collected by using different volunteers. The action recognition system classifies human actions using the skeleton representation of the latter when entering the shared workspace and the contact detection system distinguishes between intentional and incidental interactions if a physical contact between human and robot takes place. Two different deep learning networks are used for human action recognition and contact detection which in combination, lead to the enhancement of human safety and an increase of the level of robot awareness about human intentions. The results show a promising path for future AI-driven solutions in safe and productive human–robot collaboration (HRC) in industrial automation.

19 August 2025 in Journal of Intelligent & Robotic Systems
Verified
Journal Article
Open access
PDF file
Fatemeh Mohammadi AminFatemeh Mohammadi Amin
Fatemeh Mohammadi Amin
Darwin G. CaldwellDarwin G. Caldwell
Darwin G. Caldwell
Hans Wernher van de VennHans Wernher van de Venn
Hans Wernher van de Venn
The robust interpretation of 3D environments is crucial for human-robot collaboration (HRC) applications, where safety and operational efficiency are paramount. Semantic segmentation plays a key role in this context by enabling a precise and detailed understanding of the environment. Considering the intense data hunger for real-world industrial annotated data essential for effective semantic segmentation, this paper introduces a pioneering approach in the Sim2Real domain adaptation for semantic segmentation of 3D point cloud data, specifically tailored for HRC. Our focus is on developing a network that robustly transitions from simulated environments to real-world applications, thereby enhancing its practical utility and impact on a safe HRC. In this work, we propose a dual-stream network architecture (FUSION) combining Dynamic Graph Convolutional Neural Networks (DGCNN) and Convolutional Neural Networks (CNN) augmented with residual layers as a Sim2Real domain adaptation algorithm for an industrial environment. The proposed model was evaluated on real-world HRC setups and simulation industrial point clouds, it showed increased state-of-the-art performance, achieving a segmentation accuracy of 97.76%, and superior robustness compared to existing methods. The simulation dataset and source code will be made publicly available at: https://github.com/Fatemeh-MA/Fusion.

6 September 2021 in Preprints.org
Verified
Preprint
Open access
PDF file
KFKiavash Fathi
Kiavash Fathi
Hans Wernher van de VennHans Wernher van de Venn
Hans Wernher van de Venn
MHMarcel Honegger
Marcel Honegger
Performing predictive maintenance (PdM) is challenging for many reasons. Dealing with large datasets which may not contain run-to-failure data (R2F) complicates PdM even more. When no R2F data are available, identifying condition indicators (CIs), estimating the health index (HI), and thereafter, calculating a degradation model for predicting the remaining useful lifetime (RUL) are merely impossible using supervised learning. In this paper, a 3 dof delta robot used for pick and place task is studied. In the proposed method, autoencoders (AEs) are used to predict when maintenance is required based on the signal sequence distribution and anomaly detection, which is vital when no R2F data is available. Due to the sequential nature of the data, non-linearity of the system, and correlations between parameter time series, convolutional layers are used for feature extraction. Thereafter, a sigmoid function is used to predict the probability of having an anomaly given CIs acquired from AEs. This function can be manually tuned given the sensitivity of the system or optimized by solving a minimax problem. Moreover, the proposed architecture can be used for fault localization for the specified system. Additionally, the proposed method is capable of calculating RUL using Gaussian process (GP), as a degradation model, given HI values as its input.