Geochemical fingerprinting of produced water from hydraulic fracturing projects is an essential tool to trace their provenance during the postfracturing period, to quantify recovery rates and volumes of fracturing fluids, and to visualize the geodynamic structure of natural or induced fracture networks. A total of 41 produced water samples from an exploration well in the Northern Arabia Exploration Area in Saudi Arabia were collected daily from the fracture-stimulated Qusaiba hot shale and analyzed for major ions and trace elements and partially for environmental isotopes. The postfracturing period shows an initial return of supply water and potassium chloride brine, subsequently replaced by the inflow of sodium chloride–type formation water with a stable plateau salinity of 50,000 mg/L. Less than 10% of the total injected fracturing fluids were recovered during postfracturing, whereas 78.8 vol. % of the total recovered fluid is composed of formation water (20,843 out of 26,446 bbls) during the study period. Coinciding values between logged reservoir temperature and calculated geothermometers confirm the provenance of pore water from the Qusaiba hot shale or from nearby units. The recharge of the Silurian sequence with meteoric surface water occurred during the early Holocene (6–6.7 ka), as evidenced by geochronological dating with the 14C method and δ18O/δ2H values close to the global meteoric water line. The inflow of formation water into the stimulated shale layer in the postfracturing stage could be originated by the natural occurrence of pore water within a naturally fractured, black shale layer or, more likely, by the rise of groundwater from the underlying Sarah sandstones via migration pathways of natural or newly formed, vertically induced hydraulic fractures. For this particular well site and the specific hydraulic fracturing project, chemical and isotopic fingerprinting confirms the absence of ascending migration pathways from the Silurian Qusaiba hot shale toward a shallower groundwater system, which are isolated through a lithological set of more than 900 m (3000 ft) of impermeable mudstone from the Qusaiba Member.
Nitrate (NO3−) represents one of the major groundwater constituents with increasing distribution and concentration in the Kingdom of Saudi Arabia. This study aimed to determine potential sources of nitrate in the Early to Late Cretaceous Wasia aquifer system at the Al Kharj area (Central Saudi Arabia) by an integrative approach using groundwater geochemistry, nitrate isotopes (15N–NO3 and 18O–NO3), and tritium (3H) measurements. The lowest saline groundwater samples (TDS = 1400–2000 mg/L) from the peripheral zone were representative for pristine groundwater from the Wasia aquifer with nitrate concentrations below 20 mg/L and low 18O–NO3 ratios (8.7–20.6‰) but enriched 15N–NO3 values (up to 10.8‰). In contrast, 11 out of 34 analyzed water samples from irrigation wells and cattle watering wells exceeded the World Health Organization (WHO) drinking water guideline value for nitrate of 50 mg/L with maximum concentrations of up to 395 mg/L. Nitrate fertilizers and atmospheric deposition are the main sources of nitrate in groundwater in the eastern and northern sections of the study area. The combination of elevated salinities (4940–7330 mg/L), NO3 (111–395 mg/L), boron (516–1430 μg/L), and enriched 18O–NO3 (21.7–25.8‰) ratios with depleted 15N–NO3 (5.7–7.6‰) confirm the local influx of evaporated irrigation water with remnants of dissolved fertilizer into the Wasia groundwater system. There was no evidence for the influx of animal or human wastes from adjacent dairy, poultry, and housing infrastructures. Tritium concentrations below the detection limit of 0.8 TU for most borehole samples implied the absence of recent natural recharge. The estimated annual average N influx of 3.34 to 6.67 kg/ha to the Wasia aquifer requires a combination of atmospheric deposition and anthropogenic sources (mainly nitrate fertilizers) to increase the nitrogen content of the Wasia aquifer.
1 January 2022 in Journal of Petroleum Science and Engineering