Vedran Jagodnik

Dr. Vedran Jagodnik

University of Rijeka, Faculty of Civil Engineering
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 May 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SPSara Pajalić
Sara Pajalić
Josip PeranicJosip Peranic
Josip Peranic
SMSandra Maksimović
Sandra Maksimović
NČNina Čeh
Nina Čeh
VJVedran Jagodnik
Vedran Jagodnik
ZAZeljko Arbanas
Zeljko Arbanas
Physical modeling of landslides using scaled landslide models began in the 1970s in Japan at scaled natural slope physical models. Laboratory experiments of landslide behavior in scaled physical models (also known as flume or flume test) started in the 1980s and 1990s in Canada, Japan, and Australia under 1 g conditions. The main purpose of the landslide physical modeling in the last 25 years was research of initiation, motion, and accumulation of fast flow-like landslides caused by infiltration of water in a slope. In October 2018, at the Faculty of Civil Engineering University of Rijeka, started a four-year research project “Physical modeling of landslide remediation constructions’ behavior under static and seismic actions” funded by the Croatian Science Foundation. This paper presents an overview of the methods and monitoring equipment used in the physical models of a sandy slope exposed to artificial rainfall. Landslide development was monitored by observation of volumetric water content and acceleration as well as by observations of surface displacement by means of high-speed stereo cameras, terrestrial laser scanning, and structure-from-motion photogrammetry. Some of the preliminary results of the initial series of experiments are presented, and advantages and disadvantages of the used equipment are discussed.


7 October 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
VJVedran Jagodnik
Vedran Jagodnik
ZAZeljko Arbanas
Zeljko Arbanas
Earthquakes are one of the main landslide-triggering factors. Earthquakes induce cyclic shear stresses and strains in soil and raise pore water pressure, degrading soil strength towards slope failure. Slopes on which shallow landslides can form due to geological conditions are most susceptible to such failures, mainly because of low confining stress. Effective confining stress has a significant role on soil response during static and cyclic loading. Under low confining stress, soil exhibits dilatant behaviour and can degrade rapidly under cyclic loading. This paper presents the results of undrained and drained cyclic triaxial tests on uniform sandy soil material used for modelling small-scale shallow landslides under 1g conditions. Based on the scaling laws for a model in 1g conditions, the frequencies of straining amplitudes for strain-controlled cyclic triaxial tests were defined. Undrained and drained cyclic triaxial tests on the type of sand used in small-scale landslide models were performed. The sandy samples had been previously consolidated at low confining stress corresponding to the values present in the shallow landslides used as the prototype. The influences of loading frequency and low confining stress on sand behaviour were investigated, and simple models for pore pressure build-up and volumetric strain on sand behaviour were proposed. These simple models can be used to estimate increasing pore water pressure and volumetric strain due to cyclic loading at low confining stress for frequencies lower than 1 Hz. The proposed models show good correlation with the data obtained in the laboratory test.

19 August 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
VJVedran Jagodnik
Vedran Jagodnik
IKIvan Kraus
Ivan Kraus
SISandi Ivanda
Sandi Ivanda
ZAZeljko Arbanas
Zeljko Arbanas
Numerous triaxial tests on sand and sand-like materials have been performed worldwide during the past several decades. Their results provided a development of the advanced soil constitutive models and laboratory testing devices, as well as the establishment of a worldwide database of different types of uniform sandy materials. From such research, the critical state and steady state theory has emerged as one of the most useful tool for the modelling of a soil behaviour. This paper presents the results of static drained tests performed on the uniform Drava River sand from the Osijek region in Croatia. The main aim was to determine the shear behaviour and critical state, given that these characteristics are mostly unknown for the tested sand material. A series of detail triaxial tests were performed in drained conditions for three different initial relative densities, DR, and two different loading directions; e.g., axial compression and axial extension. In total, 18 drained tests were performed. The study indicated that the value of 33.75∘ is the critical friction angle for the tested sand. The relative density of 57% is determined as the critical relative density. Additionally, the study confirmed the difference in critical state for compression and extension loading. In addition, the results indicate that the sample preparation procedure has an important impact on the critical state of loosely prepared sandy samples. These results give the first insights into the behaviour of the Drava River sand, which can generally contribute to the worldwide sand behaviour knowledge base.

1 December 2015 in International Journal of Physical Modelling in Geotechnics
Verified
Journal Article
Closed access
VJVedran Jagodnik
Vedran Jagodnik
ŽAŽeljko Arbanas
Željko Arbanas
In this paper, the authors present the results of field tests on a single laterally loaded pile and two piles in line. Bored reinforced concrete piles with a diameter of 0·25 m and a depth of 5 m were constructed in natural sandy gravels. The lateral loading on a head of tested piles is applied using a hydraulic press with a maximum force of 500 kN. A single pile and two piles in line were incrementally loaded with a controlled head displacement of 2 mm until the ultimate capacity of the pile was attained. The deflections of the piles were measured using an inclinometer probe through inclinometer casings installed in the axes of the piles. The results are analysed and approximated using the Fourier series and the Cesáro sum technique. The measurements are compared using a three-dimensional finite-element method and Rocscience RS3 software, whereas the modelling soil and pile material are compared using simple constitutive laws. The comparison results of the measured and computed deflections of the piles correlate, which indicates that granular materials, such as sandy gravels, provide acceptable approximation and can be modelled using simple constitutive laws.

29 December 2023
Verified
Book Chapter
Open access
PDF file
ZAZeljko Arbanas
Zeljko Arbanas
Josip PeranicJosip Peranic
Josip Peranic
VJVedran Jagodnik
Vedran Jagodnik
Martina Vivoda ProdanMartina Vivoda Prodan
Martina Vivoda Prodan
NČNina Čeh
Nina Čeh
Physical modelling of landslides by analysing the behaviour of small-scale landslide models subjected to artificial rainfall can be divided into modelling under 1 g conditions and under increased acceleration (ntimes gravity) in a centrifuge. Physical modelling of landslide initiation began in 1970s in Japan on scaled natural slope models and after initial experiences with field and laboratory research, the small-scale landslide modelling has found a wide application around the world in different aspects of landslide investigations, analysing different types of landslides, different types of slope materials and landslide movements. The main task of landslide physical modelling is research of initiation, motion and accumulation of fast flow-like slides caused by infiltration of surface water or by shaking on a shaking table. Studies that have included landslide mitigation measures into small-scale physical models are rare and have not established correlations with a behaviour of on-site mitigation constructions. This paper discusses the behaviour of small-scale slope models supported by remedial measures under artificial rain in 1 g loading conditions. Models of slope built of different materials, with and without applied remedial measures (gravity retaining wall, gabion wall, pile wall) were exposed to identical intensities of artificial rainfall. The results of the simulations indicated that the slopes supported by remedial measures retained stability of the slope in the same conditions in which the sandy slope collapsed, as well as under significantly prolonged precipitations. At the end of the simulations, significantly higher rainfall intensities were applied to the supported slopes, exceeding the infiltration capacity of the slope material and affecting surface runout. The combination of surface erosion and saturation of superficial layer of a slope caused initiations of flow processes, while complete saturation of a slope when ground water level reached slope surface caused forming of a surface of rupture and consequently movements of the formed landslide body. The data obtained from the geodetic and geotechnical monitoring system enabled understanding of the overall process of rainfall infiltration and soil strength reduction to the development of the surface of rupture in a slope.