This report traces the leading scientific endeavors to enhance the dielectric strength of polymer dielectrics for energy storage and electrical insulation applications. Remarkable progress has occurred over the past 15 years through nanodielectric engineering involving inorganic nanofillers, coatings, and polymer matrices. This article highlights the challenges of dielectric polymers primarily toward capacitors and cable/wire insulation. It also summarizes several major technical approaches to enhance the dielectric strength of polymers and nanocomposites, including nanoparticle incorporation in polymers, filler‐polymer interface engineering, and film surface coating. More attention is directed to interface contributions, including rational design of core‐shell structures, use of low‐dimensional fillers and thermally conducting fillers, and inorganic surface coating of polymer films. These efforts demonstrated the enhancement in dielectric strength by 40–160% when controlling the fillers below 5 wt% in polyvinylidenedifluoride (PVDF) composites. This article also discussed the possible dielectric mechanisms and the positive role of interfaces against charge transport traps for attaining higher breakdown strength. The investigation of low‐dimensional filler/coating materials of high thermal conductivity can be key scientific subjects for future research.
Designing the mesopore-dominated activated carbon electrodes has witnessed a significant breakthrough in enhancing the electrolyte breakdown voltage and energy density of supercapacitors. Herein, we designed N-doped mesoporous-dominated hierarchical activated carbon (N-dfAC) from the dragon fruit peel, an abundant biomass precursor, under the synergetic effect of KOH as the activating agent and melamine as the dopant. The electrode with the optimum N-doping content (3.4 at. %) exhibits the highest specific capacitance of 427 F g–1 at 5 mA cm–2 and cyclic stability of 123% capacitance retention until 50000 charge–discharge cycles at 500 mA cm–2 in aqueous 6 M KOH electrolytes. We designed a 4 V symmetric coin cell supercapacitor cell, which exhibits a remarkable specific energy and specific power of 112 W h kg–1 and 3214 W kg–1, respectively, in organic electrolytes. The cell also exhibits a significantly higher cycle life (109% capacitance retention) after 5000 GCD cycles at the working voltage of ≥3.5 V than commercial YP-50 AC (∼60% capacitance retention). The larger Debye length of the diffuse ion layer permitted by the mesopores can explain the higher voltage window, and the polar N-doped species in the dfAC enhance capacitance and ion transport. The results endow a new path to design high-capacity and high-working voltage EDLCs from eco-friendly and sustainable biomass materials by properly tuning their pore structures.
The importance of surface roughness with respect to the bulk properties of dielectric materials is often overlooked. Surface roughness or interfaces between different material layers often significantly affects the external properties of thin films. Surface roughness holds its commonalty and critical impact among many materials properties. This review summarises the recent work on the effect of surface roughness on the mechanical, thermal, physical, and dielectric properties of dielectric films. Appropriate roughness favours adhesion, filtration, biological fouling, tribological properties, and magnetic properties. Nevertheless, lower roughness generally benefits the dielectric properties of dielectric materials, with thicknesses ranging from a few nanometres to up to 50 μm. This review discusses surface roughness control and the techniques of measurement as well. It emphasises the importance and characterisation of sample surface roughness for a better understanding of the dielectric phenomenon, mechanisms, and electrical stress test setup for various dielectric films.
MXenes show outstanding specific capacitance in aqueous electrolytes. However, the narrow potential window of aqueous electrolytes restrains the energy density. Ionic liquid electrolytes can provide a higher potential window and superior specific energy but are subject to slow ion transport and difficult intercalation for their larger ion size. It is desirable to explore larger interlayer-spaced (d-spaced) MXenes that can facilitate the large ion intercalation–deintercalation process. This work reports the first-ever supercapacitor application of the Mo2Ti2C3 MXene free-standing film electrode (f-Mo2Ti2C3) using 1 M 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)-imide (EMIMTFSI) in acetonitrile electrolyte. Without any preintercalating agents, the authors achieved an interlayer spacing of ∼2.4 nm in the f-Mo2Ti2C3 material through etching, followed by a vacuum-assisted filtration technique. The microstructure, electrochemical properties, and charge storage kinetics of the f-Mo2Ti2C3 outperform the conventional f-Ti3C2Tx. The f-Mo2Ti2C3-based symmetric two-electrode device exhibited remarkable specific energy and specific power of 188 Wh kg–1 and 22 kW kg–1, respectively, along with a high specific capacitance of 152 F g–1. This larger d-spaced f-Mo2Ti2C3 can emerge as a better alternative to the conventional f-Ti3C2Tx in ionic liquid electrolytes to design next-generation high-performance MXene supercapacitors.