The nano-colloidal suspension of nanomaterials in a base fluid, typically named a nanofluid, is a promising system that shows interesting properties, such as those related to heat transfer processes. Obtaining nanofluids with high stability is a priority challenge for this kind of system. So, a rationalization of the preparation of nanofluids is clearly needed. Thus, this study presents a methodology based on liquid phase exfoliation that makes it possible to prepare stable nanofluids and control the morphology of the nanostructures, which is defined by the surfactant used. Two stable nanofluids were prepared based on MoS₂ nanosheets and MoS₂ nanowires and a typical heat transfer fluid (HTF) used in high temperature applications. Periodic-Density Functional Theory (periodic-DFT) calculations were performed to rationalize why different nanostructures were obtained according to the surfactant used. Finally, enhancements in thermal properties were found, being up to 57% for thermal conductivity and up to 7.5% for isobaric specific heat. Therefore, these nanofluids are a promising alternative to the typical HTF used, which is a eutectic mixture of biphenyl and diphenyl oxide. Also, to our knowledge, controlling the nanostructures obtained and the rationalization of the methodology for the preparation of stable nanofluids is reported for the first time. This leads to highly stable nanofluids with improved thermal properties, promising for application in concentrating solar power.

Nanofluids are systems with several interesting heat transfer applications, but it can be a challenge to obtain highly stable suspensions. One way to overcome this challenge is to create the appropriate conditions to disperse the nanomaterial in the fluid. However, when the heat transfer fluid used is a non-polar organic oil, there are complications due to the low polarity of this solvent. Therefore, this study introduces a method to synthesize TiO₂ nanoparticles inside a non-polar fluid typically used in heat transfer applications. Nanoparticles produced were characterized for their structural and chemical properties using techniques such as X-ray Diffraction (XRD), Raman spectroscopy, Transmission Electron Microscopy (TEM), Fourier Transform Infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The nanofluid showed a high stability, which was analyzed by means of UV-vis spectroscopy and by measuring its particle size and ζ potential. So, this nanofluid will have many possible applications. In this work, the use as heat transfer fluid was tested. In this sense, nanofluid also presented enhanced isobaric specific heat and thermal conductivity values with regard to the base fluid, which led to the heat transfer coefficient increasing by 14.4%. Thus, the nanofluid prepared could be a promising alternative to typical HTFs thanks to its improved thermal properties and high stability resulting from the synthesis procedure.