The present study has been conducted using nanofluids and molten salts for energy and exergy analyses of two types of solar collectors incorporated with the steam power plant. Parabolic dish (PD) and parabolic trough (PT) solar collectors are used to harness solar energy using four different solar absorption fluids. The absorption fluids used are aluminum oxide (Al₂O₃) and ferric oxide (Fe₂O₃)‐based nanofluids and LiCl‐RbCl and NaNO₃‐KNO₃ molten salts. Parametric study is carried out to observe the effects of solar irradiation and ambient temperature on the parameters such as outlet temperature of the solar collector, heat rate produced, net power produced, energy efficiency, and exergy efficiency of the solar thermal power plant. The results obtained show that the outlet temperature of PD solar collector is higher in comparison to PT solar collector under identical operating conditions. The outlet temperature of PD and PT solar collectors is noticed to increase from 480.9 to 689.7 K and 468.9 to 624.7 K, respectively, with an increase in solar irradiation from\ 400 to 1000 W/m². The overall exergy efficiency of PD‐driven and PT‐driven solar thermal power plant varies between 20.33 to 23.25% and 19.29 to 23.09%, respectively, with rise in ambient temperature from 275 to 320 K. It is observed that the nanofluids have higher energetic and exergetic efficiencies in comparison to molten salts for the both operating parameters. The overall performance of PD solar collector is observed to be higher upon using nanofluids as the solar absorbers. Copyright © 2015 John Wiley & Sons, Ltd.

The parabolic trough collector (PTC) is one of the most widely deployed concentrating solar power technology in the world. This study aims at improving the operational efficiency of the commercially available LS-2 solar collector by increasing the convective heat transfer coefficient inside the receiver tube. The two main factors affecting this parameter are the properties of the working fluid and the inner geometry of the receiver tube. An investigation was carried out on six different working fluids: pressurized water, supercritical CO₂, Therminol VP-1, and the addition of CuO, Fe₃O₄, and Al₂O₃ nanoparticles to Therminol VP-1. Furthermore, the influence of a converging-diverging tube with sine geometry is investigated because this geometry increases the heat transfer surface and enhances turbulent flow within the receiver. The results showed that of all the fluids investigated, the Al₂O₃/Oil nanofluid provides the best improvement of 0.22% to thermal efficiency, while the modified geometry accounted for a 1.13% increase in efficiency. Other parameters investigated include the exergy efficiency, heat transfer coefficient, outlet temperatures, and pressure drop. The analysis and modeling of a parabolic trough receiver are implemented in engineering equation solver (EES).