This paper reports the recycling of bagasse ash (waste product of sugar industries) as a cement replacement in concrete, which provides a satisfactory solution to environmental concerns associated with waste management. The impact of bagasse ash content as a partial replacement of cement has been investigated on physical and mechanical properties of hardened concrete, including compressive strength, splitting tensile strength, chloride diffusion, and resistance to chloride ion penetration. The results indicate that bagasse ash is an effective mineral admixture and pozzolan with the optimal replacement ratio of 20% cement, which reduced the chloride diffusion by more than 50% without any adverse effects on other properties of the hardened concrete.
Heavy metal pollution is a serious problem in countries like Pakistan, claiming soil, water and food resources rapidly due to negligence. Accumulation and bio-concentration of seven heavy metals in vegetables growing in a mixed industrial effluent irrigated agricultural field near Hayatabad, Peshawar, Pakistan were determined by atomic absorption spectrometry. Ranges of concentration of copper, cobalt, iron, lead, chromium, manganese, zinc and nickel were 0.044–0.504, 0.009–0.085, 0.243–7.737, 0.496–0.474, 0.005–0.033, 0.019–2.019, 0.045–0.703 and 0.017–0.108 ppm respectively, in the edible parts of different vegetables growing in the area. Iron (Fe) accumulated to the highest level in all vegetables (P < 0.05). In general root was heavily contaminated with the metals, showing significantly greater accumulation than in other parts (P < 0.05). A significant amount of the metals absorbed by the vegetables was translocated to the edible parts, indicating health concerns. Cultivation of vegetable crops with such industrial effluent is not recommended on the studied land without certain remediation.
The prospective uses and applications of coal fly ash, bagasse ash and rice husk ash, being generated as a waste, in different types of industries are compared and reviewed. There are several new applications of the ashes, such as raw materials for the preparation of different new materials like glass, hollow micro spheres, cement, ceramics, geopolymers and zeolites, as an adsorbent for different waste water processes, and removal of heavy metals etc. There is a considerable potential for the increased utilization of all such ashes in their raw, additive and refined states for making industrial processes more economical and environment friendly which is strongly suggested.
Ceramic membranes are considered superior over their polymeric counterparts for applications at high temperature, pressure, and in aggressive environments with additional advantages of cleaning at high temperature. Preparation of porous ceramic membrane is expensive because the ceramic materials cannot be processed in a liquid state as polymers. Ceramic membrane synthesis involved solid powder preparation, consolidation, suspension formation, calcination, and sintering temperature which makes its synthesis very expensive. Geopolymerization is a heterogeneous reaction of aluminosilicate materials and chemical activators to form a three-dimensional structure having high mechanical strength without sintering. The overall percent energy and cost-saving of geopolymeric membranes were compared with conventional ceramic membranes. Recently, the geopolymerization technique has been used for membrane synthesis to replace conventional ceramic membrane synthesis. The objective of this review article is to discuss the potential opportunities and challenges in the synthesis and application of geopolymeric membranes.