Today's smartphone application (hereinafter 'app') markets miss a key piece of information, power consumption of apps. This causes a severe problem for continuous sensing apps as they consume significant power without users' awareness. Users have no choice but to repeatedly install one app after another and experience their power use. To break such an exhaustive cycle, we propose PowerForecaster, a system that provides users with power use of sensing apps at pre-installation time. Such advanced power estimation is extremely challenging since the power cost of a sensing app largely varies with users' physical activities and phone use patterns. We observe that the time for active sensing and processing of an app can vary up to three times with 27 people's sensor traces collected over three weeks. PowerForecaster adopts a novel power emulator that emulates the power use of a sensing app while reproducing users' physical activities and phone use patterns, achieving accurate, personalized power estimation. Our experiments with three commercial apps and two research prototypes show that PowerForecaster achieves 93.4% accuracy under 20 use cases. Also, we optimize the system to accelerate emulation speed and reduce overheads, and show the effectiveness of such optimization techniques.
Purpose: The algorithm of the Language ENvironment Analysis (LENA) system for calculating language environment measures was trained on American English; thus, its validity with other languages cannot be assumed. This article evaluates the accuracy of the LENA system applied to Korean. Method: We sampled sixty 5-min recording clips involving 38 key children aged 7–18 months from a larger data set. We establish the identification error rate, precision, and recall of LENA classification compared to human coders. We then examine the correlation between standard LENA measures of adult word count, child vocalization count, and conversational turn count and human counts of the same measures. Results: Our identification error rate (64% or 67%), including false alarm, confusion, and misses, was similar to the rate found in Cristia, Lavechin, et al. (2020) . The correlation between LENA and human counts for adult word count ( r = .78 or .79) was similar to that found in the other studies, but the same measure for child vocalization count ( r = .34–.47) was lower than the value in Cristia, Lavechin, et al., though it fell within ranges found in other non-European languages. The correlation between LENA and human conversational turn count was not high ( r = .36–.47), similar to the findings in other studies. Conclusions: LENA technology is similarly reliable for Korean language environments as it is for other non-English language environments. Factors affecting the accuracy of diarization include speakers' pitch, duration of utterances, age, and the presence of noise and electronic sounds.
In this paper, we propose a cheap and effective solution to detect if specific seats at a shared public table are occupied -- either by humans or by objects (i.e., the seats are being "hogged"). The hogging of seats, in particular, is a big problem for our campus library and required a large amount of manpower to correct (to find and clear hogged seats). We propose using two different cheap sensors, a capacitance sensor and an infrared (IR) sensor, to solve this problem. In the rest of this paper, we show how using these sensors can accurately determine if a seat is occupied by a human or empty. We then show that the capacitance sensor can also accurately distinguish between three different states; 1) seat is empty, 2) seat is occupied by a human, c) seat is empty, but table area at seat is occupied (by a book, laptop, etc. i.e., it is possibly hogged).
18 June 2019 in Japanese Journal of Applied Physics
The application of ultrasound to the casting process can improve the quality of the casting through the effects of grain refinement, degassing, wetting, deagglomeration and dispersion. To predict an effective energy range of liquid metal, computational fluid dynamics (CFD) study has recently developed an analysis tool capable of modeling cavitation and acoustic streaming in liquid metal. In general, the generation of a cavitation bubble is a very small region directly under the sonotrode in the fluid, and acoustic streaming is the main factor for the scale-up of the ultrasound process because it is a non-linear physical effect which can assist in effective dispersion of the cavitation bubble with the propagation of ultrasonic wave in the liquid. Therefore, this study is focused on the evaluation of the effect of ultrasonic injection conditions on acoustic streaming by particle image velocimetry and CFD modeling.
Open-cell type aluminum foams with various structural conditions and alloy compositions were manufactured using the replication casting process. The porosity of the foams ranged from 55% to 62%, with pore sizes of 0.7~1.0 mm, 1.0~2.0 mm, and 2.8~3.4 mm. The alloys employed included commercial A356 and A383, as well as Al-6Mg-(0, 2, 4, 6)Si alloys. Compression tests were conducted under various conditions of the foams, and the results were comparatively analyzed based on the detailed structural conditions and alloy compositions. It was observed that for the same alloy composition and equivalent porosity, a reduction in pore size led to an increased number of cell walls, enhancing energy dispersion and resulting in higher compressive yield strength and energy absorption. Under the same pore size, a decrease in porosity increased the relative density and cell wall thickness, leading to improved compressive yield strength and energy absorption. Furthermore, compressive evaluation based on alloy composition revealed the influence of the inherent mechanical properties of the material on the mechanical properties of open-cell type aluminum foams. Specifically, it was confirmed that alloys with higher ductility exhibited elastic behavior of the internal cells under external stress, significantly influencing the energy absorption of foams.