3D texture morphing for camouflage: Some animals, such as cephalopods, use soft tissue to change shape reversibly for camouflage and object manipulation. Pikulet al.used fixed-length fiber mesh embedded in a silicone elastomer to transform a flat object into a 3D structure by inflating membranes (see the Perspective by Laschi). Painted models of rocks and plants were also created that could be morphed to fully blend into their surroundings.Science, this issue p.210; see also p.169
Materials with electroprogrammable stiffness and adhesion can enhance the performance of robotic systems, but achieving large changes in stiffness and adhesive forces in real time is an ongoing challenge. Electroadhesive clutches can rapidly adhere high stiffness elements, although their low force capacities and high activation voltages have limited their applications. A major challenge in realizing stronger electroadhesive clutches is that current parallel plate models poorly predict clutch force capacity and cannot be used to design better devices. Here, we use a fracture mechanics framework to understand the relationship between clutch design and force capacity. We demonstrate and verify a mechanics-based model that predicts clutch performance across multiple geometries and applied voltages. On the basis of this approach, we build a clutch with 63 times the force capacity per unit electrostatic force of state-of-the-art electroadhesive clutches. Last, we demonstrate the ability of our electroadhesives to increase the load capacity of a soft, pneumatic finger by a factor of 27 times compared with a finger without an electroadhesive.
This paper describes a nickel-based cellular material, which has the strength of titanium and the density of water. The material’s strength arises from size-dependent strengthening of load-bearing nickel struts whose diameter is as small as 17 nm and whose 8 GPa yield strength exceeds that of bulk nickel by up to 4X. The mechanical properties of this material can be controlled by varying the nanometer-scale geometry, with strength varying over the range 90–880 MPa, modulus varying over the range 14–116 GPa, and density varying over the range 880–14500 kg/m3. We refer to this material as a “metallic wood,” because it has the high mechanical strength and chemical stability of metal, as well as a density close to that of natural materials such as wood.
Electroadhesive devices with dielectric films can electrically program changes in stiffness and adhesion, but require hundreds of volts and are subject to failure by dielectric breakdown. Recent work on ionoelastomer heterojunctions has enabled reversible electroadhesion with low voltages, but these materials exhibit limited force capacities and high detachment forces. It is a grand challenge to engineer electroadhesives with large force capacities and programmable detachment at low voltages (<10 V). In this work, tough ionoelastomer/metal mesh composites with low surface energies are synthesized and surface roughness is controlled to realize sub‐ten‐volt clutches that are small, strong, and easily detachable. Models based on fracture and contact mechanics explain how clutch compliance and surface texture affect force capacity and contact area, which is validated over different geometries and voltages. These ionoelastomer clutches outperform the best existing electroadhesive clutches by fivefold in force capacity per unit area (102 N cm−2), with a 40‐fold reduction in operating voltage (± 7.5 V). Finally, the ability of the ionoelastomer clutches to resist bending moments in a finger wearable and as a reversible adhesive in an adjustable phone mount is demonstrated.