Purpose: The purpose of this study is to evaluate the effect of water contamination on ageing of lubricants. Design/methodology/approach: The viscosity, total acid number and Fourier transform infrared spectrum of a series of lubricants after ageing with water were studied. The tribological performance (friction and wear) of the aged lubricants was also analyzed, followed by X-ray photoelectron spectroscopy analysis on the selected post test samples to study the tribochemical features of the tribofilm. Findings: The results were also compared with Part I of this study, and it was found that ageing has a different impact on lubricants and tribological performances based on the physical and chemical properties when water is present in the lubricants. Originality/value: This paper is a continuation of Part I of this study and gives an understanding on the impact of water on the lubricants and related tribological and tribochemical performance.

High-voltage electric field-driven jet deposition technology is a novel high resolution micro scale 3D printing method. In this paper, a novel micro 3D printing method is proposed to fabricate wax micro-structures. The mechanism of the Taylor cone generation and droplet eject deposition was analyzed, and a high-voltage electric field-driven jet printing experimental system was developed based on the principle of forming. The effects of process parameters, such as pulse voltages, gas pressures, pulse width, pulse frequency, and movement velocity, on wax printing were investigated. The experimental results show that the increasing of pulse width and duration of pulse high voltage increased at the same pulse frequency, resulting in the micro-droplet diameter being increased. The deposited droplet underwent a process of spreading, shrinking, and solidifying. The local remelting and bonding were acquired between the contact surfaces of the adjacent deposited droplets. According to the experiment results, a horizontal line and a vertical micro-column were fabricated by adjusting the process parameters; their size deviation was controlled within 2%. This research shows that it is feasible to fabricate the micro-scale wax structure using high-voltage electric field-driven jet deposition technology.