A breadboard of a three-layer printed reflectarray for dual polarization with a different coverage in each polarization has been designed, manufactured, and tested. The reflectarray consists of three layers of rectangular patch arrays separated by a honeycomb and backed by a ground plane. The beam shaping for each polarization is achieved by adjusting the phase of the reflection coefficient at each reflective element independently for each linear polarization. The phase shift for each polarization is controlled by varying either the x or y patch dimensions. The dimensions of the rectangular patches are optimized to achieve the required phase shift for each beam at central and extreme frequencies in the working band. The reflectarray has been designed to produce a contoured beam for a European coverage in H-polarization in a 10% bandwidth, and a pencil beam to illuminate the East Coast in North America in V-polarization. The measured radiation patterns show that gain requirements are practically fulfilled in a 10% bandwidth for both coverages, and the electrical performances of the breadboard are close to those of a classical dual gridded reflector

An electronically reconfigurable transmitarray device at 12 GHz is presented in this work. This paper highlights the functioning of this kind of device and thoroughly examines the proposed reconfigurable transmitarray. The architecture is discussed along with the design and selection of all the constituting elements and the prototypes for all of them. In order to add reconfigurability to the transmitarray structure, 360° reflective phase shifters were designed, prototyped and validated for direct application. Eventually, a demonstrative prototype for an active transmitarray with phase shifters was assembled, and radiation pattern measurements were taken in an anechoic chamber to demonstrate the capabilities of this structure.

This article presents the design and fabrication of low-loss, -weight, and -cost, modified Butler matrix in groove gap waveguide technology at W-band, implemented by additive manufacturing. The design, simulations, and measurements of each of the elements that conform to the modified Butler matrix are presented. The proposed modified Butler matrix is asymmetric and oriented to an easy assembly with a radial antenna in order to obtain simultaneous sum and difference patterns for a narrowband radar application. The measured individual components of the modified Butler matrix fit very well with the simulations. As for the full modified Butler matrix, measurements provide a 0.7% bandwidth below -20 dB for sum and difference ports centered at 94 GHz. The amplitude and phase imbalance are below 1.5 dB and 20°, respectively. This narrow bandwidth is due to the difference in length between input and output ports due to the asymmetry of the design. The total losses of the modified Butler matrix are below 1 dB.

In this letter, a dual circular polarized steering antenna for satellite communications in X-band is presented. This antenna consists of printed elements grouped in an array, able to work from 7.25 up to 8.4 GHz in both polarizations: left-handed circular polarization (LHCP) and right-handed circular polarization (RHCP). The module antenna is compact, with narrow beamwidth, and reaches a gain of 16 dBi. It has the capability to steer in elevation to ±10^° and ±40^° electronically with a Butler matrix. In order to reduce the mutual coupling between adjacent patches, electromagnetic band-gap (EBG) structures are introduced. These EBGs combine double-layer and edge location via in order to reduce the size, without changing the low-permittivity substrate, and therefore maintaining the high radiation efficiency of the antenna.

This article presents a thorough study of spherical probe-corrected phaseless near-field measurements with the two-scans technique. Such technique is based on retrieving the antenna under test radiation pattern from the measurement of the near-field amplitude signals on two spheres of different radii. The postprocessing of this type of measurements results in a highly nonlinear algorithm, prone to get trapped in local minima and provide incorrect solutions when the measurement conditions are not properly selected. Through a series of numerical simulations, the influence of different measurement parameters on the phaseless technique is analyzed. It will be shown how both the relative and absolute values of the measurement spheres highly affect the convergence of the phase retrieval algorithm. The type of AUT and its radiation pattern characteristic also play a fundamental role in the feasibility of phaseless measurements. Other parameters such as sampling rate, noise, probe correction, polar truncation, and measurement offsets are also investigated. The conducted study allows to extract a set of guidelines to improve the accuracy of phaseless spherical near-field algorithms. In addition, purely phaseless antenna measurement examples are given to demonstrate the algorithm capabilities and limitations, and to validate the developed numerical investigations.

A lightweight portable planar slot array antenna at X-band for fixed satellite communications is presented in this letter. The terminal is composed of two radial-line slot antennas (RLSAs) with the slots placed on the upper layer in spiral: one for reception (RX) band with left-handed circular polarization (LHCP), and the other one for transmission (TX) band with right-handed circular polarization (RHCP). A lightweight two-layer dielectric structure is used to achieve and optimize the RLSA weight. The radiating element is a slot pair, designed to provide circular polarization. The feeding network consists of a 50-Ω SMA connector for each RLSA. A radiation efficiency of more than 70% is achieved due to the low dielectric constant substrate. Finally, measurements of the lightweight portable planar RX/TX antenna prototypes are presented and compared to simulations, where very good agreement is observed.