In the context of climate change, increasingly severe forest fires present a significant threat to lives, property, ecosystem functionality, and the sustainable development of forest resources. As a result, there is an urgent need for rapid, efficient, and environmentally friendly technologies for fire suppression and containment. This paper begins by reviewing the current research on forest fire extinguishing agents and materials that hold promise for effective fire suppression. Among these agents, gaseous and foam extinguishing materials exhibit drawbacks such as low efficiency or significant environmental hazards. In contrast, natural polymer hydrogels, which are high in water content, environmentally friendly, and biodegradable, show significant potential for developing clean and efficient extinguishing materials. Furthermore, this paper discusses existing environmental assessment standards for fire extinguishing agents, as well as the assessment systems proposed in various studies. It finds that, while universal assessment standards are fairly well-established, current research primarily focuses on enhancing fire suppression performance. However, the environmental performance assessment of forest fire extinguishing agents—often used in large quantities—remains inadequate. Therefore, there is an urgent need to establish a comprehensive and systematic environmental assessment system to address this theoretical and practical gap.

Wildfires and pests are natural disturbance agents in many forest ecosystems that often contribute to ecological succession, nutrient cycling, and forest species composition. Mongolian pine (Pinus sylvestris var. mongolica) is a coniferous species that plays an important role as an ecological barrier, and is widely spread in northern China. Its wood is loose; its branches, leaves, and cones contain a high level of resin and volatile oils that make the species highly flammable and the stands dominated by the species are very vulnerable to fire. Recently, resinosis on boles of Pinus sylvestris became an epidemic in China. To explore the potential effects of pests on fire, we compared the flammability of Mongolian pine barks with or without resinosis on boles using a cone calorimeter and several combustion analyses. We found that the barks from boles with resinosis had a greater oil content than the healthy trees. The study also indicated that the ignition times of the barks from boles with and without resinosis were 6.00 s (±1.73) and 22.67 s (±1.15), respectively, and that the heat release rate curves were parabolic, with peaks 225.19 and 75.27 kW/m², respectively, for the two bark types. Additionally, because resinosis was on the low- to mid-bole of infested trees, the barks from boles with resinosis tended to be ignited much easier than those without resinosis. This clearly evidenced that pests could affect fire severity and behavior by increasing forest flammability. More information about the role that pests play in the different forest cover types is needed to increase our understanding of fire danger and to develop sound forest management policies.

Guizhou Province in China exhibits a distinctive agroforestry mosaic landscape with frequent human activity in forested areas. This region experiences recurrent forest fires, characterized by significant difficulties in suppression and high risks. Research on the prediction of forest fire occurrences holds crucial practical significance in terms of enhancing regional forest fire prevention capabilities. However, the current fire risk forecasting methods in the area consider only meteorological factors, neglecting firebrands and fuel conditions, which results in deviations between forecasted and actual fire occurrences. Therefore, this study proposes a novel fire occurrence prediction method that utilizes the ignition component (IC) from the National Fire Danger Rating System (NFDRS) to characterize the weather–fuel complex while integrating the firebrand occurrence probability to construct a predictive model. The applicability and accuracy of this method are also evaluated. The results show that, firstly, the probability of at least one daily forest fire occurrence in the study area can be expressed as a nonlinear function based on the IC. Secondly, as time progresses, the correlation between the forest fire occurrence probability and the IC shows a decreasing trend, although the differences across different time spans are not statistically significant. Thirdly, when a 5-year time span is adopted, the error in calculating the forest fire occurrence probability based on the IC is significantly lower than at other time spans. Finally, a predictive model for the forest fire occurrence probability based on the IC is established, where P = (100*IC)/(4.06 + IC), with a mean absolute error (MAE) of 4.83% and mean relative error (MRE) of 14.87%. Based on this research, the IC enables the calculation of forest fire occurrence probabilities, assessment of fire risk ratings, and guidance for fire preparedness and planning. This work also provides theoretical support and a methodological reference for conducting forest fire probability studies in other regions.

This study aimed to systematically characterize the pyrolysis characteristics and combustibility of six typical tree species across different altitude gradients in southwestern Yunnan, providing references for fuel management and selection of potential fire-resistant species in this region. Thermogravimetric analysis (heating rate: 20 °C·min⁻¹, air atmosphere) was employed to obtain TG-DTG curves of bark, branches, and leaves. The Coats–Redfern integral method was applied to calculate kinetic parameters, and principal component analysis was conducted for comprehensive combustibility evaluation. The results demonstrated the following: (1) The pyrolysis process of all species underwent the following four distinct stages: moisture evaporation, holocellulose decomposition, lignin decomposition, and ash formation. Among these, holo-cellulose decomposition constituted the primary mass loss stage. Significant differences in pyrolysis characteristics were observed among different plant parts, with leaves and bark exhibiting lower initial pyrolysis temperatures; (2) The activation energy ranged from 56.05 to 86.41 kJ·mol⁻¹ across different components, with branches requiring the highest energy for pyrolysis; (3) Principal component analysis based on multiple indicators yielded the following comprehensive combustibility ranking: Pinus yunnanensis > Betula alnoides > Lithocarpus henryi > Quercus acutissima > Cunninghamia lanceolata > Myrica rubra; and (4) The combustibility assessment results integrating multiple variables (total mass loss rate, stage-specific mass loss, activation energy, and ash content) showed significant differences from the analysis based solely on activation energy, verifying the necessity of a multi-dimensional comprehensive evaluation.