Monodisperse carbon nanodots (MCNDs) having an identical composition, structure, shape and size possess identical chemical and physical properties, making them highly promising for various technical and medical applications. Herein, we report a facile and effective route to obtain monodisperse carbon nanodots 3.5 ± 0.9 nm in size by thermal decomposition of organosilane within the pores of monodisperse mesoporous silica particles with subsequent removal of the silica template. Structural studies demonstrated that the MCNDs we synthesized consist of ∼7–10 defective graphene layers that are misoriented with respect to each other and contain various oxygen-containing functional groups. It was demonstrated that, owing to their identical size and chemical composition, the MCNDs are formed via coagulation primary aggregates ∼10–30 nm in size, which are, in turn, combined into secondary porous spherical aggregates ∼100–200 nm in diameter. The processes of coagulation of MCNDs and peptization of their hierarchical aggregates are fully reversible and can be controlled by varying the MCND concentration or the pH value of the hydrosols. Submicrometer spherical aggregates of MCNDs are not disintegrated as the hydrosol is dried. The thus obtained porous spherical aggregates of MCNDs are promising for drug delivery as a self-disassembling container for medicinal preparations.

We have developed a colloidal crystal templating method for preparation of diamond films with 2D and 3D ordered porous structures. The technological process involved breaks down into (a) impregnation into the pores of silica colloidal crystal (opal) films of detonation nanodiamond (DND) particles from their hydrosol; (b) microwave plasma-enhanced chemical vapor deposition (MWPECVD) regrowth with diamond of pores with high DND filling; (c) Ar(+) ion dry etching of fragments of shells of coalesced diamond crystallites which form in the course of MWPECVD on the surface of the SiO(2) beads making up the outer surface of a film and (d) wet etching of the SiO(2) template in aqueous HF solution. The final samples are either connected to the substrate or free-standing films of various thicknesses having 2D or 3D ordered porous structures. The morphology of the diamond films fabricated by this method replicates the pore network of the opal template. Raman measurements confirm the diamond structure of the synthesized ordered porous material.

The optical properties of metal-infiltrated synthetic opals have been studied analytically, numerically, and experimentally in the visible and infrared spectral ranges. A simple model of weakly interacting resonant cavities is proposed to qualitatively understand the dispersion of electromagnetic waves in metallic photonic crystals. In the approximation of an ideal metal infiltrated into opals this model is exact, and the frequencies of the propagating modes in metallic opals are close to the eigenfrequencies of a single spherical resonator. Photonic band structures based on the dispersion of a metal dielectric constant have been calculated numerically for several metals and show similarity with the ideal metal model. Reflectivity and transmission spectra of thin-film metallic opals are calculated. Growth and saturation of the reflectivity spectra at low frequencies are manifestations of the omnidirectional band gap. The sharpest minimum in the reflectivity and maximum in the transmission spectra correspond to the position of the cutoff frequency. Silver- and copper-infiltrated opals were fabricated and their reflectivity spectra were measured in the visible to mid-IR spectral range. These spectra are in a good agreement with the theoretical calculations.

In this paper, regular three-dimensional systems of GaN, InN and InGaN nanoclusters have been fabricated for the first time in a void sublattice of artificial opal. The opal consisted of 220 nm diameter close packed amorphous silica spheres and had a regular sublattice of voids accessible to filling by other substances. GaN, InN and InGaN were synthesized directly in the opal voids from precursors such as metal salts and nitrogen hydrides. The composites' structures have been characterized using x-ray diffraction, Raman spectroscopy, atomic force microscopy and optical measurements.