Metal additive manufacturing technologies, such as powder bed fusion process, directed energy deposition (DED) process, sheet lamination process, etc., are one of promising flexible manufacturing technologies due to direct fabrication characteristics of a metallic freeform with a three-dimensional shape from computer aided design data. DED processes can create an arbitrary shape on even and uneven substrates through line-by-line deposition of a metallic material. Theses DED processes can easily fabricate a heterogeneous material with desired properties and characteristics via successive and simultaneous depositions of different materials. In addition, a hybrid process combining DED with different manufacturing processes can be conveniently developed. Hence, researches on the DED processes have been steadily increased in recent years. This paper reviewed recent research trends of DED processes and their applications. Principles, key technologies and the state-of-the art related to the development of process and system, the optimization of deposition conditions and the application of DED process were discussed. Finally, future research issues and opportunities of the DED process were identified.

Directed energy deposition (DED) provides a promising additive manufacturing method to fabricate and repair large metallic parts. However, it may suffer from excessive heat accumulation due to a high build rate, particularly during a wire feeding-type DED process. The implementation of interpass time in between two depositions of beads plays an important process role to passively control the interpass temperature. In this study, a method to estimate the proper interpass time using regression analysis from heat transfer finite element analysis is proposed for maintaining the interpass temperature during a wire feeding-type DED deposition of a planar layer. The overlapping beads of a planar layer are estimated using a polygonal-shaped bead profile in the finite element model. From the estimated proper interpass time, a selected proper interpass time scheme (PITS) is suggested for practical implementation. The selected PITS is applied in a thermo-mechanical finite element model to evaluate the temperature distribution and its effects on the depth of the melt pool, the depth of the heat-affected zone (HAZ), displacement, and residual stresses. By comparing the predicted results with those using a constant interpass time scheme (CITS), the selected PITS shows better control in reducing the depths of the melt pool and HAZ without severely inducing large displacement and residual stresses.

Thermomechanical characteristics are highly dependent on the deposition strategy of the directed energy deposition (DED) process, including the deposition path, the interpass time, the deposition volume, etc., as well as the preheating condition of the substrate. This paper aims to investigate the effects of the deposition strategy and the preheating temperature on thermomechanical characteristics of Inconel 718 super-alloy deposited on an AISI 1045 substrate using a DED process via finite element analyses (FEAs). FE models for different deposition strategies and preheating temperatures are created to examine the thermomechanical behavior. Sixteen deposition strategies are adopted to perform FEAs. The heat sink coefficient is estimated from a comparison of temperature histories of experiments and those of FEAs to obtain appropriate FE models. The influence of deposition strategies on residual stress distributions in the designed model for a small volume deposition is examined to determine feasible deposition strategies. In addition, the effects of the deposition strategy and the preheating temperature on residual stress distributions of the designed part for large volume deposition are investigated to predict a suitable deposition strategy of the DED head and appropriate preheating temperature of the substrate.