Global warming is amplified in the Arctic. However, numerical models struggle to represent key processes that determine Arctic weather and climate. To collect data that help to constrain the models, the HALO–(𝒜𝒞)3 aircraft campaign was conducted over the Norwegian and Greenland seas, the Fram Strait, and the central Arctic Ocean in March and April 2022. The campaign focused on one specific challenge posed by the models, namely the reasonable representation of transformations of air masses during their meridional transport into and out of the Arctic via northward moist- and warm-air intrusions (WAIs) and southward marine cold-air outbreaks (CAOs). Observations were made over areas of open ocean, the marginal sea ice zone, and the central Arctic sea ice. Two low-flying and one long-range, high-altitude research aircraft were flown in colocated formation whenever possible. To follow the air mass transformations, a quasi-Lagrangian flight strategy using trajectory calculations was realized, enabling us to sample the same moving-air parcels twice along their trajectories. Seven distinct WAI and 12 CAO cases were probed. From the quasi-Lagrangian measurements, we have quantified the diabatic heating/cooling and moistening/drying of the transported air masses. During CAOs, maximum values of 3 K h−1 warming and 0.3 g kg−1 h−1 moistening were obtained below 1 km altitude. From the observations of WAIs, diabatic cooling rates of up to 0.4 K h−1 and a moisture loss of up to 0.1 g kg−1 h−1 from the ground to about 5.5 km altitude were derived. Furthermore, the development of cloud macrophysical (cloud-top height and horizontal cloud cover) and microphysical (liquid water path, precipitation, and ice index) properties along the southward pathways of the air masses were documented during CAOs, and the moisture budget during a specific WAI event was estimated. In addition, we discuss the statistical frequency of occurrence of the different thermodynamic phases of Arctic low-level clouds, the interaction of Arctic cirrus clouds with sea ice and water vapor, and the characteristics of microphysical and chemical properties of Arctic aerosol particles. Finally, we provide a proof of concept to measure mesoscale divergence and subsidence in the Arctic using data from dropsondes released during the flights.
Unmanned aerial systems (UAS) fill a gap in high-resolution observations of meteorological parameters on small scales in the atmospheric boundary layer (ABL). Especially in the remote polar areas, there is a strong need for such detailed observations with different research foci. In this study, three systems are presented which have been adapted to the particular needs for operating in harsh polar environments: The fixed-wing aircraft M AV with a mass of 6 kg, the quadrocopter ALICE with a mass of 19 kg, and the fixed-wing aircraft ALADINA with a mass of almost 25 kg. For all three systems, their particular modifications for polar operations are documented, in particular the insulation and heating requirements for low temperatures. Each system has completed meteorological observations under challenging conditions, including take-off and landing on the ice surface, low temperatures (down to −28 C), icing, and, for the quadrocopter, under the impact of the rotor downwash. The influence on the measured parameters is addressed here in the form of numerical simulations and spectral data analysis. Furthermore, results from several case studies are discussed: With the M AV, low-level flights above leads in Antarctic sea ice were performed to study the impact of areas of open water within ice surfaces on the ABL, and a comparison with simulations was performed. ALICE was used to study the small-scale structure and short-term variability of the ABL during a cruise of RV Polarstern to the 79 N glacier in Greenland. With ALADINA, aerosol measurements of different size classes were performed in Ny-Ålesund, Svalbard, in highly complex terrain. In particular, very small, freshly formed particles are difficult to monitor and require the active control of temperature inside the instruments. The main aim of the article is to demonstrate the potential of UAS for ABL studies in polar environments, and to provide practical advice for future research activities with similar systems.
How air masses transform during meridional transport into and out of the Arctic is not well represented by numerical models. The airborne field campaign HALO-(𝒜𝒞)3 applied the High Altitude and Long-range Research Aircraft (HALO) within the framework of the collaborative research project on Arctic amplification (𝒜𝒞)3 to address this question by providing a comprehensive observational basis. The campaign took place from 7 March to 12 April 2022 in the North Atlantic sector of the Arctic, a main gateway of atmospheric transport into and out of the Arctic. Here, we investigate to which degree the meteorological and sea ice conditions during the campaign align with the long-term climatology (1979–2022). For this purpose, we use the European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis v5 (ERA5), satellite data, and measurements at Ny-Ålesund, including atmospheric soundings. The observations and reanalysis data revealed two distinct periods with different weather conditions during HALO-(𝒜𝒞)3: the campaign started with a warm period (11–20 March 2022) where strong southerly winds prevailed that caused poleward transport of warm and moist air masses, so-called moist and warm air intrusions (WAIs). Two WAI events were identified as atmospheric rivers (ARs), which are narrow bands of strong moisture transport. These warm and moist air masses caused the highest measured 2 m temperatures (5.5 °C) and daily precipitation rates (42 mm d−1) at Ny-Ålesund for March since the beginning of the record (1993). Over the sea ice northwest of Svalbard, ERA5 indicated record-breaking rainfall. After the passage of a strong cyclone on 21 March 2022, a cold period followed. Northerly winds advected cold air into the Fram Strait, causing marine cold air outbreaks (MCAOs) until the end of the campaign. This second phase included one of the longest MCAO events found in the ERA5 record (19 d). On average, the entire campaign period was warmer than the climatological mean due to the strong influence of the ARs. In the Fram Strait, the sea ice concentration was well within the climatological variability over the entire campaign duration. However, during the warm period, a large polynya opened northeast of Svalbard, untypical for this season. Compared to previous airborne field campaigns focusing on the evolution of (mixed-phase) clouds, a larger variety of MCAO conditions was observed during HALO-(𝒜𝒞)3. In summary, air mass transport into and out of the Arctic was more pronounced than usual, providing exciting prospects for studying air mass transformation using HALO-(𝒜𝒞)3.
In March 2013, the Springtime Atmospheric Boundary Layer Experiment (STABLE) was carried out in the Fram Strait region and over Svalbard to investigate atmospheric convection and boundary layer modifications due to interactions between sea ice, the atmosphere, and open water. A major goal was the observation of marine cold-air outbreaks (MCAOs), which are typically characterised by the transport of very cold air masses from the ice-covered ocean over a relatively warm water surface and which often affect local and regional weather conditions. During STABLE, MCAOs were observed on 4 d within a period displaying a strongly northward-shifted sea ice edge north of Svalbard and, thus, with an unusually large Whaler's Bay polynya. The observations mainly consisted of in situ measurements from airborne instruments and of measurements by dropsondes. Here, we present the corresponding data set from a total of 15 aircraft vertical profiles and 22 dropsonde releases. Besides an overview of the flight patterns and instrumentation, we provide a detailed presentation of the individual quality-processing mechanisms, which ensure that the data can be used, for example, for model validation. Moreover, we discuss the effects of the individual quality-processing mechanisms, and we briefly present the main characteristics of the MCAOs based on the quality-controlled data. All 37 data series are published on the World Data Center PANGAEA (Lüpkes et al., 2021a, https://doi.org/10.1594/PANGAEA.936635).
13 December 2020 in Quarterly Journal of the Royal Meteorological Society
A non‐eddy‐resolving microscale model is applied to simulate convection over three different leads (elongated channels in sea ice), which were observed by aircraft over the Arctic Marginal Ice Zone in 2013. The study aims to evaluate the quality of a local and a non‐local turbulence parametrization. The latter represents a lead‐width‐dependent approach for the turbulent fluxes designed for idealised conditions of a lead‐perpendicular, near‐neutral inflow in an atmospheric boundary layer (ABL) capped by a strong inversion at around 250 to 350 m height. The observed cases considered here are also characterised by an almost lead‐perpendicular flow but, in comparison to the idealised conditions, our analysis covers effects in stable inflow conditions and a much shallower ABL. The model simulations are initialised with observed surface parameters and upwind profiles, and the results are compared with measurements obtained above and downwind of the leads. The basic observed features related to the lead‐generated convection can be reproduced with both closures, but the observed plume inclination and vertical entrainment near the inversion layer by the penetrating plume are underestimated. The advantage of the non‐local closure becomes obvious by the more realistic representation of regions with observed vertical entrainment or where the observations hint at counter‐gradient transport. It is shown by comparison with the observations that results obtained with the non‐local closure can be further improved by including the determination of a fetch‐dependent inversion height and by specifying a parameter determining the plume inclination as a function of the upwind ABL stratification. Both effects improve the representation of fluxes, boundary‐layer warming, and vertical entrainment. The model is also able to reproduce the observed vanishing of a weak low‐level jet over the lead, but its downwind regeneration and related momentum transport are not always well captured, irrespective of the closure used.
In the polar regions, the atmospheric boundary layer (ABL) characteristics are strongly influenced by convection over leads, which are elongated channels in the sea ice covered ocean. The effects on the ABL depend on meteorological forcing and lead geometry. In non-convection-resolving models, in which several leads of potentially different characteristics might be present in a single grid cell, such surface characteristics and the corresponding ABL patterns are not resolved. Our main goal is to investigate potential implications for such models when these subgrid-scale patterns are not considered appropriately. We performed non-eddy-resolving microscale simulations over five different domains with leads of different widths separated by 100% sea ice. We also performed coarser-resolved simulations over a domain representing a few grid cells of a regional climate model, wherein leads were not resolved but accounted for via a fractional sea ice cover of 91% in each cell. Domain size and mean sea ice concentration were the same in all simulations. Differences in the domain-averaged ABL profiles and patterns of wind, temperature, and turbulent fluxes indicate a strong impact of both the leads and their geometry. Additional evaluations of different turbulence parameterizations show large effects by both gradient-independent heat transport and vertical entrainment.