Heartwood formation is a unique phenomenon of tree species. Although the accumulation of heartwood substances is a well-known feature of the process, the accumulation mechanism remains unclear. The aim of this study was to determine the accumulation process of ferruginol, a predominant heartwood substance of Cryptomeria japonica, in heartwood-forming xylem. The radial accumulation pattern of ferruginol was examined from sapwood and through the intermediate wood to the heartwood by direct mapping using time-of-flight secondary ion mass spectrometry (TOF-SIMS). The data were compared with quantitative results obtained from a novel method of gas chromatography analysis using laser microdissection sampling and with water distribution obtained from cryo-scanning electron microscopy. Ferruginol initially accumulated in the middle of the intermediate wood, in the earlywood near the annual ring boundary. It accumulated throughout the entire earlywood in the inner intermediate wood, and in both the earlywood and the latewood in the heartwood. The process of ferruginol accumulation continued for more than eight annual rings. Ferruginol concentration peaked at the border between the intermediate wood and heartwood, while the concentration was less in the latewood compared wiht the earlywood in each annual ring. Ferruginol tended to accumulate around the ray parenchyma cells. In addition, at the border between the intermediate wood and heartwood, the accumulation was higher in areas without water than in areas with water. TOF-SIMS clearly revealed ferruginol distribution at the cellular level. Ferruginol accumulation begins in the middle of intermediate wood, initially in the earlywood near the annual ring boundary, then throughout the entire earlywood, and finally across to the whole annual ring in the heartwood. The heterogeneous timing of ferruginol accumulation could be related to the distribution of ray parenchyma cells and/or water in the heartwood-forming xylem.

Understanding the actual situation of radiocesium (¹³⁷Cs) contamination of trees caused by the Fukushima nuclear accident is essential for predicting the future contamination of wood. Particularly important is determining whether the ¹³⁷Cs dynamics within forests and trees have reached apparent steady state. We conducted a monitoring survey of four major tree species (Japanese cedar, Japanese cypress, konara oak, and Japanese red pine) at multiple sites. Using a dynamic linear model, we analyzed the temporal trends in ¹³⁷Cs activity concentrations in the bark (whole), outer bark, inner bark, wood (whole), sapwood, and heartwood during the 2011–2020 period. The activity concentrations were decay-corrected to September 1, 2020, to exclude the decrease due to the radioactive decay. The ¹³⁷Cs concentrations in the whole and outer bark samples showed an exponential decrease in most plots but a flat trend in one plot, where ¹³⁷Cs root uptake is considered to be high. The ¹³⁷Cs concentration ratio (CR) of inner bark/sapwood showed a flat trend but the CR of heartwood/sapwood increased in many plots, indicating that the ¹³⁷Cs dynamics reached apparent steady state within one year in the biologically active parts (inner bark and sapwood) and after several to more than 10 years in the inactive part (heartwood). The ¹³⁷Cs concentration in the whole wood showed an increasing trend in six plots. In four of these plots, the increasing trend shifted to a flat or decreasing trend. Overall, the results show that the ¹³⁷Cs dynamics within forests and trees have reached apparent steady state in many plots, although the amount of ¹³⁷Cs root uptake in some plots is possibly still increasing 10 years after the accident. Clarifying the mechanisms and key factors determining the amount of ¹³⁷Cs root uptake will be crucial for predicting wood contamination.

Plant-dwelling beetles overcome challenging attachment hurdles by means of ellaborated, tarsal attachment devices, which are frequently equipped with hairy adhesive pads. While the tarsal functional morphology has been intensively studied in leaf and ladybird beetles during the last decades, longhorn beetles (Cerambycidae) have been widely neglected in experimental studies on insect attachment. However, they are known to strongly hold on to plant substrates, using tarsi that are densely covered with adhesive setae. In the present study, we examined the Japanese pine sawyer beetle, Monochamus alternatus, which lives in an arboreal habitat, as an exemplary case. Traction force of male and female beetles on (1) flat and (2) cylindrical, rod-shaped glass was measured. The substrates are further called (1) glass plate and (2) glass rod. Both male and female M. alternatus bear ribbon-shaped tarsal adhesive setae with broadened, ultrathin terminals. They release a distinct amount of adhesion-mediating fluid after each step. The beetles never walked on the vertically oriented glass plate. However, they performed well on the horizontal plate, as well as on the horizontally and vertically oriented glass rod. Males generated higher forces and safety factors (traction force devided by the body weight) than females, reaching up to 206 mN traction force and a safety factor of 32 on the horizontal glass rod. Thus, they are able to carry their remarkable body weight (ca. 300 mg) throughout a rather long life span. We assume the adaptation of M. alternatus to the attachment on convex and rod-shaped structures to be present in its natural habitat. This longhorn beetle species achieves a proper hold through a combination of interacting parameters: appropriate body alignment and two-sided leg grasping, and generation of normal and friction forces by tarsal pads. This smart attachment system gives rise to the reconsideration of the ecological and evolutionary background, and provides insights for the development of bio-inspired technical grippers.