Urinalysis is a simple and non-invasive approach for the diagnosis and monitoring of various health disorders. While urinalysis is predominantly confined to clinical laboratories the non-invasive sample collection makes it applicable in wide range of settings outside of central laboratory confinements. In this respect, 3D printed devices integrating sensors for measuring multiple parameters may be one of the most viable approaches to ensure cost-effectiveness for widespread use. Here we evaluated such a system for the multiplexed determination of sodium, potassium and calcium ions in urine samples with ion-selective electrodes based on state of the art octadecylamine-functionalized multi-walled carbon nanotube (OD-MWCNT) solid contacts. The electrodes were tested in the clinically relevant concentration range, i.e. ca. 10^-4 - 10^-1 mol L^-1 and were proven to have Nernstian responses under flow injection conditions. The applicability of the 3D printed flow manifold was investigated through the analysis of synthetic samples and two certified reference materials. The obtained results confirm the suitability of the proposed system for multiplexed ion analysis in urine.

The non-pneumatic tire (NPT) is a type of wheel whichdevelopment is related to the beginning of automotive development. The non-pneumatic tire (NPT) is a type of tire that does not contain compressed gases or fluid to provide directional control and traction. Nowadays, this type of wheel is more and more often used in special purpose vehicles, e.g., in military vehicles and working machines. The main feature of the non-pneumatic tire is a flexible support structure (including the part of the wheel between the tread and the rim). This paper presents the results of research aimed at determining the influence of the geometry of the NPT’s (intended for All-Terrain Vehicle–ATV/Utility Task Vehicle–UTV) load-bearing structure on its quasi-static directional characteristics. The experimental tests included the determination of the radial stiffness of research objects on a non-deformable flat surface and on a single obstacle, as well as the determination of the degree of deformation for the elastic structure and belt. The significant influence of the elastic structure’s shape and the elastomer, as the material forming the NPT, on its radial stiffness was revealed.

Nowadays, non-pneumatic tires are becoming an increasingly likely alternative to pneumatic tires. The function of compressed air has been taken over by the belt and the elastic structure (materials used and shape of the components). The research presented in the paper was carried out in quasi-static conditions. The research's aim was to compare the radial stiffness, hysteresis and selected parameters of the contact patch of two non-pneumatic tires and four pneumatic tires used interchangeably in ATVs/UTVs. Analizowane opony niepneumatyczne charakteryzują się większą sztywnością radialną niż opony pneumatyczne tego samego rozmiaru. The analyzed non-pneumatic tire with a cellular structure has the highest hysteresis of the radial characteristics of the tested wheels and the highest values of the unit pressure in the area of contact patch. The paper also verified two methods of calculating the contact patch length of non-pneumatic tires.

Problems such as global warming and rising oil prices are driving the implementation of ideas to reduce liquid fuel consumption and greenhouse gas emissions. One of them is the use of natural gas as an energy source. It is a hydrocarbon fuel with properties that allow the reduction of CO₂ (Carbon Dioxide) emissions during combustion. Solutions are being implemented that allow for the use of natural gas to means of transport, namely in trucks of various categories and intended use. These installations are used in new vehicles, but also in the form of conversion for used cars, usually several years old. The article presents the results of tests of an engine from a used semi-trailer truck with a mileage of approx. 800 thousand km, with the compressed natural gas supply system installed. This installation (hardware and software), depending on the engine operating conditions, enables the replacement of up to 80% of diesel (base fuel) with natural gas. The impact of changing the fuel supply method on the traction characteristics calculated with the use of external characteristics of both conventional and dual-fuel mode was assessed. The emissions of exhaust gas components were also determined under the conditions of the UNECE Regulation No. 49. The test results confirm that compared to conventional fueling, dual fueling allows for a significant reduction in CO₂ emissions, even in a used vehicle with high mileage. The use of a non-factory installation did not significantly affect the traction properties of the vehicle, and engine wear is of greater importance in this case (comparison with factory data). The work is a valuable supplement to the results of the research in which the impact of the use of a non-factory CNG (Compressed Natural Gas) supply system on the performance of a semi-trailer truck unit equipped with such an installation was assessed compared to a semi-trailer truck unit powered in a classic way with diesel fuel.