This work reports on the evolution law of helium bubbles in Hastelloy N alloy on post-irradiation annealing conditions. After helium ion irradiation at room temperature and subsequent annealing at 600 °C (1 h), the transmission electron microscopy (TEM) micrograph indicates the presence of helium bubbles with size of 2 nm in the depth range of 0–300 nm. As for the sample further annealed at 850 °C (5 h), on one hand, a “Denuded Zone” (0–38 nm) with rare helium bubbles forms due to the decreased helium concentration. On the other hand, the “Ripening Zone” (38–108 nm) and “Coalescence Zone” (108–350 nm) with huge differences in size and separation of helium bubbles, caused by different coarsening rates, are observed. The mechanisms of “Ostwald ripening” and “migration and coalescence”, experimentally proved in this work, may explain these observations.
This study aims to evaluate the radiation dosimetry of a new technetium-99m‒labelled small-molecule inhibitor of prostate-specific membrane antigen (HYNIC-Glu-Urea-A, 99mTc-HYNIC-PSMA) and its feasibility as a tumor-imaging agent in prostate cancer (PCa) patients. A total of 15 PCa patients were enrolled in this study. For the dosimetry study, 5 PCa patients received whole-body planar scans at 0.5 h, 1 h, 2 h, 4 h and 8 h after 99mTc-HYNIC-PSMA injection. The Dosimetry Toolkit (GE, Milwaukee) was used to process the data and segment the organs in the SPECT/CT images, which were then projected onto planar images. The organ-specific absorbed doses, total-body absorbed doses and 99mTc-HYNIC-PSMA effective doses of patients were calculated using OLINDA/EXM 1.1 software. Whole-body SPECT/CT images were also acquired from additional 10 prostate patients to investigate the feasibility of 99mTc-HYNIC-PSMA for imaging tumors by calculating the ratio of tumor-to-background tracer uptake at 2 h after 740 MBq administration. The total-body absorbed dose was 1.54E-03 ± 2.43E-04 mGy/MBq, and the effective dose was 3.72E-03 ± 4.5E-04 mSv/MBq. Compared to published studies of other similar PSMA tracers and 99mTc-targeted conventional tracers, the absorbed doses of 99mTc-HYNIC-PSMA in all organs showed that it could be used safely in the human body. In addition, 99mTc-HYNIC-PSMA showed high tracer uptake (with a tumor-to-background ratio of 9.42 ± 2.62) in the malignant lesions of PCa patients, making it a promising radiopharmaceutical imaging method for site-specific management of PCa.
16 March 2007 in Journal of Physics D: Applied Physics
Purpose: This study aimed to evaluate the diagnostic value of a support vector machine (SVM) model built with texture features based on standard 2-[18F]fluoro-2-deoxy-D-glucose (18F-FDG) PET in patients with solitary pulmonary nodules (SPNs) at a volume larger than 5 mL. Patients and methods: The PET results of 82 patients diagnosed with SPNs between 2014 and 2018 were retrospectively analysed. The volumes of interest (VOIs) of the SPNs were automatically segmented using threshold techniques from the standard PET imaging. Then, a large number of texture features were extracted from the VOIs using texture-analysis software. Next, an optimized SVM machine-learning model that was trained on standard PET images using texture features was employed to identify the optimal discrimination between malignant and benign nodules. Diagnostic models based on the maximum standardized uptake value (SUVmax) and the metabolic tumour volume (MTV) were compared with the SVM model with regard to the SPN diagnostic power. Results: Compared with the SUVmax and MTV models, the texture-based SVM model provided an improvement of approximately 20% in diagnostic accuracy, positive predictive value, negative predictive value and the area under the operating characteristic curve. The receiver operating characteristic curve of the SVM model showed a significant improvement compared with the MTV model (P = 0.0345 < 0.05) and the SUVmax model (P = 0.01 < 0.05). Conclusions: Standard 18F-FDG PET imaging can increase the differentiation of benign and malignant SPNs with volumes larger than 5 mL using an SVM model based on texture features.
21 May 2018 in Journal of the American Ceramic Society